Cocoon HE210303 User manual

Quick Star Guide HE210303 02/2022
8CH 1080P SECURITY
CAMERA SYSTEM
1. Connect each of the camera extension cables to the video and power connectors.
2. Connect the other end of the extension cables to the pors marked “VIDEO IN” on the back of the
DVR.
3. Connect the 8-way power splitter to each of the extension cable power plugs.
Note: We highly recommend reading the manual in full before testing and installing your business security
system. Test all connections are working before permanently installing DVR and cameras. Position
the DVR in a central location where all 8 cameras will reach. If you are wanting to use your DVR via
mobile and/or PC, install near your router and refer to the user manual for furher instructions on
installation and operation.

HE210303 02/2022
Quick Star Guide
8CH 1080P SECURITY
CAMERA SYSTEM
After Sales Support 1300 663 907
www.cocoonproducts.com.au
6. Connect the power adaptor to the 8-way splitter and plug into an outlet. Switch the outlet on.
7. Connect the remaining power adaptor to the DVR and plug into a mains outlet. Switch the outlet
on. The DVR will begin the boot sequence.
NOTE: Both the DVR and cameras operate “always on”. To turn the cameras or DVR of, switch of the
power adaptors at the power outlet
5. Connect the mouse to the rear USB por.
4. Connect the included HDMI cable to the back of the DVR and connect the other end of the HDMI
cable to your monitor or TV (not a computer or laptop).
NOTE: You must switch your TV or monitor to the correct INPUT once the DVR has been powered on. For
example, HDMI1