cocoweb 19 User manual

PACKAGE CONTENTS:
• 19-inch LED Clip-on Grand Piano Lamp
• 24V 0.5A DC Power Adapter
• Mounting Clamp Assembly
• Dimming Controller
COCOWEB LIMITED WARRANTY:
Cocoweb.com warrants its lamps to be made of high quality materials, free from defects of material or workmanship under
normal use and to perform the service for which they are intended in a reliable and efficient manner when properly installed,
for a period of two years from the date of purchase. During the warranty period, Cocoweb.com will, at its choice, repair or
replace any part or parts which prove to be defective upon proper following of Cocoweb’s Returns Process to Cocoweb.com.
NOTE: Modification of piano lamp in any way will void the warranty.
LED ARRAY REPLACEMENT:
The LED array is rated to last 50,000 hours. Should the LED bulbs cease to function in the warranty period, Cocoweb will
replace the LED array free of charge. Cocoweb may at its choice, send a replacement LED array or request for the whole lamp
to be shipped to a Cocoweb location or authorized dealer. Shipping and handling charges may be incurred. After the 2 year
warranty period, you may purchase a replacement LED array by contacting Cocoweb customer service.
CARE INSTRUCTIONS:
DO NOT use abrasive or chemical cleaners to clean the piano lamp as it may damage the finish. Use only warm water, then
wipe dry with a clean soft cloth.
TROUBLESHOOTING AND REPAIR:
Should the lamp stop working properly and/or one of the following problems occur: (1) The lamp fails to turn on (2) The lamp
flickers (3) The lamp dims to an unusual level, turn the lamp off using the toggle switch, recheck all connections and then
turn the lamp back on. If the problem persists, discontinue use of lamp and contact Cocoweb customer service.
IMPORTANT SAFETY INSTRUCTIONS:
• Do not place near any extreme heat or in direct sunlight.
• Place on an even and secure surface.
• Use only the supplied power adapter and dimming controller.
• Do not use with damaged electrical cords.
• Keep the lamp dry and clean.
• Never overload electrical circuits as it may cause electrical shock or fire.
• For indoor use only. Not suitable for damp rooms.
• Do not look directly into the light source.
SPECIFICATIONS:
• Fits 3/8” - 1 1/2” piano boards
• 19” swivelable shade
• Pre-installed natural light LED array
• Light array contains 12 evenly spaced
LED nodes
• Toggle on/off switch located on the
lamp shade
• LED lifespan: 50,000 hours
• Color temperature: 2700 K
• Power Usage: Less than 10 watts
• Electrical cord: 9.5 feet long
• UV and Infrared-free LED technology
• Universal 24v 0.5A DC power adapter
Rev. 1 (03/15)
Danger of suocation
Keep children away from packaging
cocoweb.com
The information in this document is subject to change without notice.
COPYRIGHT ©COCOWEB.COM 2015
COCOWEB.COM
3 Corporate Park, Suite 240
Irvine, CA 92606
Phone: [phone]
19” LED GRAND PIANO LAMP WITH DIMMER (GPLED19D)
USER MANUAL
Make sure the light toggle switch is in the OFF position before plugging in the piano lamp to the wall outlet. Use the toggle
switch on the lighting fixture or a properly installed wall switch to toggle the piano lamp ON and OFF. Plugging and
unplugging the power adapter to toggle the lamp ON and OFF can drastically reduce the life of the power adapter and may
cause it to malfunction.
WARNING
Congratulations on purchasing your new quality lighting fixture from Cocoweb.com. If you have any questions about these
instructions or are missing any parts, please call us at 888-783-0378 or visit our website at www.cocoweb.com.

cocoweb.com
The information in this document is subject to change without notice.
COPYRIGHT ©COCOWEB.COM 2015
COCOWEB.COM
3 Corporate Park, Suite 240
Irvine, CA 92606
Phone: [phone]
19” LED GRAND PIANO LAMP WITH DIMMER (GPLED19D)
USER MANUAL
Make sure the light toggle switch is in the OFF position before plugging in the piano lamp to the wall outlet. Use the toggle
switch on the lighting fixture or a properly installed wall switch to toggle the piano lamp ON and OFF. Plugging and
unplugging the power adapter to toggle the lamp ON and OFF can drastically reduce the life of the power adapter and may
cause it to malfunction.
WARNING
STEP 1: ATTACH MOUNTING CLAMP TO THE LAMP ARM
a. Remove the screws and cover from the mounting clamp.
b. Insert the lamp arm into the mounting clamp assembly and replace the cover and screws.
STEP 2: MOUNT THE LAMP ONTO THE PIANO BOARD OR MUSIC STAND
a. Loosen the two thumbscrews.
b. Mount the mounting clamp onto a piano board or music stand.
Note You may have to manually adjust the opening of the mounting clamp if you have a thinner/thicker piano board.
c. Tighten the two thumbscrews making sure the lamp is securely fitted to the piano board or music stand.
LIGHT CONTROLS
1. The ON/OFF toggle switch (Figure 2) is pre-installed on the lamp shade. Simply toggle the toggle switch to turn the lamp
on or off.
2. Rotate the dimmer control to increase or decrease light brightness. Rotate counter clockwise until it clicks to turn lamp off.
Note:Piano lamp can be toggled on/off using dimmer or toggle switch. If light is not working, make sure both are in the on
position.
STEP 3: Plug in the power adapter connection into the open port on the dimmer.
STEP 5: Plug in the power adapter into a wall outlet.
STEP 4: Plug in the dimmer connection into the bottom of the lamp arm.
Step 2a / 2c: Thumb Screw
Step 1a / 1b: Cover
Step 3
Step 4
Step 5
Step 1a: Screws
Mounting Clamp
On / Off
Figure 2
Dimmer
Power Adapter
OFF MAX
FUNCTION STEPLESS CONTROL
INPUT 24 Volt DC
OUTPUT MAX 1.5 Amps
SIZE L 1.5in x D 1¾in x H 2in
Specifications