cocoweb GPLED14-7 User manual

14-inch LED Clip-on Grand Piano Lamp (GPLED14-7)
Fits 3/8”- 1 1/2“ piano boards
14” lamp shade with natural light LED array pre-installed and adjustable gooseneck
The lamp shade contains 18 evenly spaced LED nodes
Toggle on/o switch located on the lamp shade
LED lifespan: 50,000 hours
Color Temperature: 2700 K
Power Usage: Less than 10 watts
Electrical cord: 9.5 feet long
UV and infrared-free LED technology
Universal 24v 0.5A DC power adapter
USER MANUAL Specifications:
Danger of suocation
Keep children away from packaging
Contents: Limited Warranty Info:
14-inch LED Clip-on Grand Piano Lamp
24V 0.5A DC Power Adapter
Before Use:
Before using this lamp for the rst time, read
these instructions thoroughly and store them
in a safe place for future reference.
Warning:
Any attempts to repair or modify this lamp in
any way which are not expressly approved in
writing by Cocoweb will void any warranties.
Care and Cleaning:
Troubleshooting and Repair:
Should the lamp stop working properly and/or one
of the following problems occur:
The lamp fails to turn on.
The lamp ickers.
The lamp dims to an unusual level.
Turn the lamp o using the toggle switch, recheck
all connections and then turn the lamp back on.
If the problem persists, discontinue use of lamp and
contact Cocoweb customer service.
DO NOT use abrasives or chemical cleaners to clean
the light as it may damage the nish. Use only warm
water, then wipe dry with a clean soft cloth.
LED Array Replacement:
The LED array is rated to last 50,000 hours.
Should the LED bulbs cease to function in the
warranty period, Cocoweb will replace the
LED array free of charge. Cocoweb may at its
choice, send a replacement LED array or request
for the whole lamp to be shipped to a Cocoweb
location or authorized dealer. Shipping and
handling charges may be incurred. After the 2 year
warranty period, you may purchase a replacement
LED array by contacting Cocoweb customer service.
Important Safety Instructions:
Make sure lamp is in the o position before
plugging into a wall outlet.
Do not place near any extreme heat or in direct
sunlight.
Place on an even and secure surface.
Use only the supplied power adapter.
Do not use with damaged electrical cords.
Keep the lamp dry and clean.
Never overload electrical circuits as it may cause
electrical shock or re.
For use in indoor dry rooms only. Not suitable
for damp rooms.
Do not look directly into the light source.
Cocoweb warrants its products to be made of
rst class materials, free from defects of material
or workmanship under normal use and to
perform the service for which they are intended
in a reliable and ecient manner when properly
installed, for a period of two years from the date
of purchase. Failure of the product under
normal operating conditions, may be repaired
by Cocoweb or our authorized service dealer
free of charge. Some shipping and handling
charges may be incurred. During the warranty
period, Cocoweb will, at its choice, repair or
replace any part or parts which prove to be
defective if returned to Cocoweb. Warranty may
be void if mishandling, abuse, improper
operation, modication, attempted repair or any
unauthorized tampering occurs. Damage from
natural conditions such as res, pollution,
earthquakes or any other natural or unnatural
conditions, accidents, etc. are not covered under
this limited warranty.
COPYRIGHT ©COCOWEB.COM, INC. 2014
The information contained in this document is subject to change without notice.
COCOWEB.COM, INC.
42 Corporate Park, Suite 250
Irvine, CA 92606
Phone: [phone]
cocowebTM
www.cocoweb.com

STEP I. MOUNT THE LAMP ONTO THE PIANO
BOARD OR MUSIC STAND.
1. Loosen the two thumbscrews.
2. Mount the mounting clamp onto a piano
board or music stand. NOTE: You may have to
manually adjust the opening of the mounting
bracket if you have a thinner/thicker piano
board or music stand.
3. Tighten the two thumbscrews, making sure
that the lamp is securely mounted to the
piano board or music stand.
STEP II. PLUG IN THE ADAPTER CONNECTION
INTO THE BOTTOM OF THE LAMP ARM.
STEP III. PLUG THE POWER ADAPTER INTO
A WALL OUTLET.
STEP IV. LIGHT CONTROLS: THE ON/OFF TOGGLE
SWITCH IS PRE-INSTALLED ON THE LAMP
SHADE. SIMPLY TOGGLE THE TOGGLE SWITCH
TO TURN THE LAMP ON OR OFF.
mounting clamp
thumbscrew
LAMP USAGE
COPYRIGHT ©COCOWEB.COM, INC. 2014
The information contained in this document is subject to change without notice.
COCOWEB.COM, INC.
42 Corporate Park, Suite 250
Irvine, CA 92606
Phone: [phone]
cocowebTM
www.cocoweb.com