cocoweb GPLED19A User manual

19-inch LED Adjustable Clip-On Grand Piano Lamp (GPLED19A)
19-inch LED Clip-on Grand Piano Lamp
24V 0.5A DC Power Adapter
Mounting Clamp Assembly
Fits 3/8”- 1 1/2“ piano boards
19” swivelable shade with natural light LED array pre-installed
The lamp shade contains 12 evenly spaced LED nodes
Toggle on/o switch located on the lamp shade
LED lifespan: 50,000 hours
Color Temperature: 2700 K
Power Usage: Less than 10 watts
Electrical cord: 9.5 feet long
UV and infrared-free LED technology
Universal 24v 0.5A DC power adapter
Cocoweb warrants its products to be made of
rst class materials, free from defects of material
or workmanship under normal use and to
perform the service for which they are intended
in a reliable and ecient manner when properly
installed, for a period of two years from the date
of purchase. Failure of the product under
normal operating conditions, may be repaired
by Cocoweb or our authorized service dealer
free of charge. Some shipping and handling
charges may be incurred. During the warranty
period, Cocoweb will, at its choice, repair or
replace any part or parts which prove to be
defective if returned to Cocoweb. Warranty may
be void if mishandling, abuse, improper
operation, modication, attempted repair or
any unauthorized tampering occurs. Damage
from natural conditions such as res, pollution,
earthquakes or any other natural or unnatural
conditions, accidents, etc. are not covered under
this limited warranty.
USER MANUAL
Contents:
Specifications:
Limited Warranty Info:
Before Use:
Before using this lamp for the rst time, read
these instructions thoroughly and store them
in a safe place for future reference.
Warning:
Any attempts to repair or modify this lamp in
any way which are not expressly approved in
writing by Cocoweb will void any warranties.
COPYRIGHT ©COCOWEB.COM, INC 2014
The information contained in this document is subject to change without notice.
Danger of suocation
Keep children away from packaging
Care and Cleaning:
Troubleshooting and Repair:
Should the lamp stop working properly and/or one
of the following problems occur:
The lamp fails to turn on.
The lamp ickers.
The lamp dims to an unusual level.
Turn the lamp o using the toggle switch, recheck
all connections and then turn the lamp back on.
If the problem persists, discontinue use of lamp and
contact Cocoweb customer service.
DO NOT use abrasives or chemical cleaners to clean
the light as it may damage the nish. Use only warm
water, then wipe dry with a clean soft cloth.
LED Array Replacement:
The LED array is rated to last 50,000 hours.
Should the LED bulbs cease to function in the
warranty period, Cocoweb will replace the
LED array free of charge. Cocoweb may at its
choice, send a replacement LED array or request
for the whole lamp to be shipped to a Cocoweb
location or authorized dealer. Shipping and
handling charges may be incurred. After the 2 year
warranty period, you may purchase a replacement
LED array by contacting Cocoweb customer service.
Important Safety Instructions:
Make sure lamp is in the o position before
plugging into a wall outlet.
Do not place near any extreme heat or in direct
sunlight.
Place on an even and secure surface.
Use only the supplied power adapter.
Do not use with damaged electrical cords.
Keep the lamp dry and clean.
Never overload electrical circuits as it may cause
electrical shock or re.
For use in indoor dry rooms only. Not suitable
for damp rooms.
Do not look directly into the light source.
COCOWEB.COM, INC.
42 Corporate Park, Suite 250
Irvine, CA 92606
Phone: [phone]
cocowebTM
www.cocoweb.com

STEP I. ATTACH MOUNTING CLAMP TO THE
LAMP ARM (Figure 2).
1. Remove the two Athumbscrews and the
cover from the mounting clamp.
2. Insert the lamp arm into the mounting
clamp assembly and replace the cover and
thumbscrews.
STEP II. MOUNT THE LAMP ONTO THE PIANO
BOARD OR MUSIC STAND (Figure 2).
1. Loosen the two Bthumbscrews.
2. Mount the mounting clamp onto a
piano board or a music stand. NOTE:
You may have to manually adjust the opening
of the mounting clamp if you have a
thinner/thicker piano board or music stand.
3. Tighten the two Bthumbscrews.
STEP III. PLUG IN THE ADAPTER CONNECTION
INTO THE BOTTOM OF THE LAMP ARM (Figure 3).
STEP IV. PLUG THE POWER ADAPTER INTO
A WALL OUTLET.
STEP V. LIGHT CONTROLS: THE ON/OFF TOGGLE
SWITCH IS PRE-INSTALLED ON THE LAMP
SHADE. SIMPLY TOGGLE THE TOGGLE SWITCH
TO TURN THE LAMP ON OR OFF.
(Figure 1)
(Figure 2)
(Figure 3)
swivel joint
switch
Athumbscrew
Bthumbscrew mounting bracket
cover
power
adapter
LAMP USAGE
COPYRIGHT ©COCOWEB.COM, INC. 2014
The information contained in this document is subject to change without notice.
COCOWEB.COM, INC.
42 Corporate Park, Suite 250
Irvine, CA 92606
Phone: [phone]
cocowebTM
www.cocoweb.com