Cofar CF-2001FP User manual

1/ 21
InstructionManual
Model: CF-2001FP, CF-2006FP ,CF-1905FP, CF-2007FP
IMPORTANTSAFEGUARDS
When using electrical appliances, basicsafety precautions should always befollowed including the
following:
1. Read all instructions.
2. To protect against riskof electrical shock do not put the plug, power cord, bowl and base unit in
waterorother liquid.
3. Unplug from outlet when not in use, before putting on or taking off parts and before
cleaning.Flashing light (or identifyothermeans used) indicates ready to operate.Avoid inadvertent
contact with the touch screen.
4. Unplug from outlet when not in use and before cleaning. Allow to cool beforeputting on or taking
off parts.
5. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any
control to “off’, then remove plug from wall outlet.
6. Keep body parts, jewelry and loose clothing awayfrom moving parts and fitted tools/attachments.
Avoid contacting moving flashing light indicates ready tooperate.Avoid any contact withblades or
moveable parts. Keep fingers outof discharge opening.
7. Always remove the blade before pouring contents fromthe bowl.
8. To reduce the risk of injury, never place cutter-assembly blades on base without jar properly
attached.
9. Always operateblender with cover in place.
10. Keep hands and utensils out of container while blending to reduce the risk of severe injury to
persons ordamage to theblender.Ascraper may be used butmust be used only when theblender
is not running.
11. Never use a damaged appliance.Get it checked orrepaired.
12. Do not exceed themaximumfilllevel marked on the inside of the bowl.
13. Never let the power unit, cord or plug get wet.

2/ 21
14. Be careful when handling or touching anypart of the appliance whenbeing used inthe cook mode
orafter cooking. In particular the bowl, lid and toolsas they will remain HOTlong after the
appliance hasbeen switched off.
15. Keep hands and utensils away frommoving blades or discs while processing food to reduce the
risk of severe injury to persons or damage to thefood processor. Ascraper maybeused but must
be used only when the food processor is not running.
16. To reduce the risk of injury, never place cutting blade or discs on base withoutfirstputting bowl
properly in place.
17. Be certain cover is securelylocked in place before operating appliance.
18. Never feed food by hand.Always use food pusher.
19. Do not attemptto defeatthe coverinterlock mechanism.
20. Do not fill the bowl above the marked maximumfill line (or rated capacity) to avoid risk of injury
due to damage to the cover or bowl.
21. Do not touch hot surfaces. Use handlesorknobs.
22. Use the handles to remove and carry thebowl. Use ovengloves when handling the hot bowl and
hot tools.
23. The underside of the bowl will remain hot long after the heating has stopped. Use caution when
handling and use a work surface protection mat when placing the bowl on heatsensitive surfaces.
24. Be careful of steam escaping from the bowl particularly when removing the lid orfiller cap.
25. Do not remove thelid orfillercap whilst liquid is boiling. Scalding may occur if the lid is removed
during the brewing cycles.
26. Always close the filler cap when using the chopping function.
27. Only use the bowl and tools supplied with this appliance. Never use the bowl with any other heat
source.
28. Never operate the appliance in the cook mode with the bowlempty.
29. Do not use the blender lid to operate the processor. This appliance will be damaged and may
cause injury if the interlock mechanism is subjected to excessive force.
30. When using this appliance ensure it is positioned on a level surface away from the edge. Do not
position below overhanging cupboards.
31. For the correct and safe operation ensure that the bowl base and temperature sensors are clean
and dry before cooking.
32. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliancemust not be supplied through an external switching device, such as a timer,
or connected to a circuit that is regularly switched onand off by the utility.
33. Always ensure food is thoroughlycooked and is piping hot before eating.

3/ 21
34. Food should be eatenshortly after cooking or allowed to coolquickly and then refrigerated as soon
as possible.
35. Misuse of your appliance can result in injury.
36. A short power-supply cord is used to reduce the risk resulting from it being grabbed by children,
becoming entangled in,or tripping over a longer cord.
37. This appliance is not intended for use by persons (including children) with reduced physical,
sensory,ormental capabilities, orlackof experienceand knowledge, unlesstheyare closely
supervised and instructed concerning useof the applianceby aperson responsiblefor their safety.
Close supervision is necessary when any appliance isused by or near children.Children should
be supervised to ensure that theydo not playwith the appliance.
38. Children shall not play with the appliance.
39. This appliance shall not be used by children. Keep the appliance and its cord out of reach of
children. Never let the cord hang down where a child could grab it.
40. Warning: Be careful when handing the sharp cutting blades, emptying the bowl and during
cleaning. Blades are sharp. Handle carefully.
41. Blade assembly is sharp, not locked in place and removable. Handle with care. When handling
blade assembly, always hold by the shaft.
42. To avoid a risk of injury, before pouring with the cover removed, carefully remove the blade
assembly.
43. Always disconnect the appliance from the supply if it is left unattended and before assembly,
disassemblyorcleaning.
44. Do not operate any appliance with adamaged cord or plug or afterthe appliance malfunctions, or
is dropped ordamaged in any manner. Contact themanufacturer at their customerservice email
([e-mail]) for information on examination, repair, or adjustment.
45. Only use the appliance for its intended domestic use. We will not accept any liability if the
appliance is subjectto improper use, or failure to comply with these instructions.
46. The maximum load for blending function was 800 g carrots / 1200 g water.
47. Be careful if hot liquid is poured into thefood processor or blender as it can be ejected out of the
appliance due to a sudden steaming.
48. The appliance isonlyto be used with the stand provided.
49. The appliance isfor household and indoor use only.
50. Avoid spillage on the connector.
51. Do not disassemble the base of cup (including handle enclosure), it’s not for user maintenance.
52. After the motor stop working ( if itwas) , the cooling fan will stillkeep working for another 2mins

4/ 21
53. Surfaces are liable to gethot duringuse.
54. For how to clean the surfaces in contact with food please refer the paragraph of Care and
Cleaning.
55. CAUTION: Ensure that the appliance is switched off before removingit from the stand.
56. Before plugging in, Make sure your electricity supply is the same as the one shown on the
underside of your appliance.
57. WARNING: THIS APPLIANCE MUST BE GROUNDED.
58. The useof attachments, including canning jars, not recommended by the manufacturermay cause
a risk of injury to persons.
59. Do not useoutdoors.
60. Do not let cord hang over edge of table or counter. Do not let cord contact hot surface, including
the stove.
61. Do not place on or near a hot gas or electric burner, orin a heated oven.
62. When blending hot liquidsoroperating in theheating mode,openor remove each non-pouring lid
or cap, and close any edge cover openings intended for pouring.
63. Allow to cool before assembling or disassembling parts and before cleaning the appliance.
64. Intended for countertop use only.
65. WARNING: Spilled food can cause serious burns. Keep appliance and cord away from children.
Never drape cord over edge of counter, never use outlet below counter, and never use with an
extension cord.
66. Extreme caution must be used when moving an appliance containing hot oil or other hotliquids.
67. Vented lid is to remain in place over the cover opening whenblending hot liquids or operating in
the heating mode.
68. Do not useappliance forother than intended use.
SAVE THESEINSTRUCTIONS
HOUSEHOLDUSE ONLY

5/ 21
1, Product overview
2, Parts
4567
1
2
3
8
10
11
13
12
1514
24
23
22
21
20
19
18
17
16
9
18
4567
1
2
3
8
10
11
13
12
1514
24
23
22
21
20
19
17
16
9

6/ 21
3, Display screen
1）DIYUI
2）
Auto programs UI
3）Recipe UI
30/31/32
28
29
33

7/ 21
4）Setup UI
5）HomeUI
37
38
39

8/ 21
4, Key Parts
No.
Name
No.
Name
No.
Name
1
Filler cap
16
Seal of deep steamer
basket
31
Home Button
2
Blender Lid
17
Steamer basket, deep
32
Weight Button
3
Blender lid seal
18
Steamer basket,
shallow
33
Function Button
4
Whisk
19
Lid for steamer basket
34
Sort managment
5
Stir paddle
20
Driving shaft
35
A-Z
6
Blade
21/21A
Slicer/shred
36
Search Button
7
Steam basket
22
Seal for FP lid
37
More Button
8
Blender jug
23
FP lid
38
A-Z button
9
Power cord
24
Pusher
39
Setup UI
10
Main switch
25
Temperature Button
40
Recipes UI
11
Base unit
26
Timer Button
41
DIY UI
12
Knob
27
Speed Button
42
Auto program UI
13
Display screen
28
Star/Pause/Stop
Button
43
Download UI
14
Spatula
29
Interface shift dot
15
Measuring cup
30
Setup Button
5，Toset-up before use
41

9/ 21
2
3
4
6
Attach the Blend lid,
or FP lid or Steamer
Plug your Powercord into the main base
then, Switch on。When main base has the
Power cord ,not assemble the Power cord
Place the drive shaft correctly locked into the jug .
Choose difference accessories for difference
cooking purpose .
Add the ingredients
or waterto thejug .If
need food processor
function . Then you
need to attach food
processor lid and put
ingredientsdirectly
through food
dispenser.
1
Insert the Jug
into the Main
Unit .Press down
firmly to lock into
place .(LOGO in
front),Maxin
back)
5
5
max
max

10 / 21
9
10
8
7
By sliding left direction in screenor click the right
dot in red circle or turn the knob in clockwise to
go to common functionmenu. Click the or
click the middle dot in red circle to go back to the
initial step forreset.
Click the function icon in common function
menu to go to the corresponding screen
interface.Startworking after completing
the step 7 and 8. Click to exit this
interface.This icon isfor steaming.
Slide the corresponding icon or rotate the knob to set
the temperature, time and speeds. Click the minute
or second in the time icon to quickly set the exact
time. Reverse function: Click the icon for shift
rotating direction
Click afterset thetemperature, time and
speed to start, then the icon will change to ,
the machine is working now.
Click or push button in knob to pause
working, click or continuouslypressthepush
button in knob to stop working and exit the
program.