Colebrook Bosson Saunders Monto MON/001 User manual

MON-001-INST-B-JUN 2021
MON/001
Installation Instructions
for Monto Sit Stand Riser
IMPORTANT INFORMATION ENCLOSED
Before using Monto please read these instructions for correct installation and use of the product.

DO NOT LET MONTO OVERHANG THE DESK EDGE
Risk of Monto falling from surface and causing injury.
CAUTION - WORKING LOAD 7KG/15LB
DO NOT OVERLOAD THE RISER WITH HEAVY OBJECTS
DO NOT STAND, SIT OR LEAN ON MONTO
Risk of Monto collapsing under excess weight load
Monto’s front edge must
NOT overhang the front
edge of the work surface.
Risk of Monto falling
from surface.
7KG/15LB
IMPORTANT - SAFETY CONSIDERATIONS
1
WARNING
Do not place Monto upside-down or activate the legs
unless the unit is placed on all 4 feet, because serious
injury may occur.
Please review the adjustment instructions in Section 3 of
this document before attempting to activate Monto’s legs.
2
Some important precautions
IMPORTANT
• Monto is intended for general purpose desktop use. It is not
intended for heavy-duty applications.
• Do not lean heavily on the front of Monto’s platform.
• Do not stand on Monto.
• Do not mount monitors directly to Monto. Monitors should
be independently mounted to the work surface using a
suitable monitor arm.
• Maximum weight of supported equipment on Monto’s
platform not to exceed 7kg.
• Please follow the installation instructions carefully. Correct
installation is essential to the safe and reliable operation of
the Monto Sit Stand Riser.
• Please take care to avoid trapping fingers when installing or
adjusting the product.
• Ensure that the work surface upon which Monto is installed
is strong enough and stable enough to support the product
and any supplementary equipment such as monitor arms and
monitors.
• Ensure that the surface upon which Monto is being installed
is large enough to accommodate the product throughout its
full range of adjustment. In particular ensure that Monto is
positioned such that it does not overhang the front of the
work surface and is never in danger of ‘toppling’ from the
surface.
• It is the user’s responsibility to ensure that Monto and
any associated monitor mounts are installed using fixings
appropriate to the surface or structure to which it is being
mounted.
• Do not install Monto outdoors or in environments where it
will be directly exposed to moisture. Do not install it in harsh
or corrosive environments.
• Do not use this product for any purpose other than that for
which it was designed.
• Keep out of the reach of children. Monto is not a toy.
• Do not leave Monto unattended around children.
ELECTRICAL SAFETY
• Safe installation of electrical equipment and electronic devices is the
responsibility of the user.
• Please take care to avoid trapping cables when installing or adjusting the
product.
MAINTENANCE AND INSPECTION
• Ensure all screws and fixings are fully tightened and occasionally re-tighten if
necessary.
• Clean the product with a damp cloth. DO NOT use solvents.
• If Monto leaves marks on the surface upon which it is installed, clean them o with a
damp cloth.
DISCLAIMER
As part of Colebrook Bosson Saunders ongoing product improvement
programme, the design of products may change without prior notice and
details may vary from those illustrated.
Colebrook Bosson Saunders hold a number of patents and other
intellectual property rights covering our products and processes. You
can find patent information on our website at:
www.colebrookbossonsaunders.com/patents
PATENTS

CONFIGURATION 1: MOUNTING WITH A MONITOR AND MONITOR ARM
CONFIGURATION 2: MOUNTING WITH A LAPTOP
Mounting Options
34
For CONFIGURATION 1 you will need...
Monto Sit Stand Riser
Ollin/Flo Extended
Split Clamp
Ollin/Flo Extended
Top Mount Clamp
or
A suitable monitor arm.
CBS recommends using
the Ollin Dynamic
Monitor Arm
1
For CONFIGURATION 2 you will need...
Monto Sit Stand Riser
Monto can be set up for adjustable Sit Stand laptop use or can be used in conjunction with a separate
monitor and adjustable monitor arm.
Monto is installed and adjusted in the same way, regardless
of whether it is being used with a laptop or with a monitor.
For optimum ergonomic performance CBS
recommends the use of a laptop stand (such
as CBS’s Oripura) along with a separate
keyboard and mouse.

FIT DESK FIXING TO WORKSURFACE INSTALL MONITOR ARM TO CLAMP
ARM AND MONITOR INSTALLATION COMPLETE
1.1 1.2
1
WARNING
Ensure that arm is pushed fully down onto desk fixing
OLLIN/FLO EXTENDED
SPLIT CLAMP
OLLIN/FLO EXTENDED
TOP MOUNT CLAMP
NOTE
Please follow instructions supplied with clamps for full
installation details.
Please follow instructions supplied with monitor arm for full
installation details
5
MONITOR ARM INSTALLATION SETTING UP WORKSTATION 2
PLACE MONTO ON THE WORK SURFACE
PLACE YOUR DEVICES ON MONTO
WORKSTATION INSTALLATION COMPLETE
6
Place your keyboard and mouse (and laptop
if you’re using one) on Monto’s surface.
NOTE
For optimum convenience and a tidy installation, CBS recommends
using compact wireless devices. If your devices require cable
connection, use the handy cable clip features to manage the cables.
IMPORTANT: See following sections for use and adjustment of Monto
CONFIGURATION 1
with a monitor &
monitor arm
CONFIGURATION 2
with a laptop
If you are using a monitor and monitor arm, install this before adding the Monto Sit Stand Riser.
If you are using a laptop only, go straight to section 2.
2.1
2.2
WARNING
It is important that the front edge of Monto does NOT
overhang the worksurface.

REPOSITION THE MONITOR
ADJUSTING MONTO RELEASE THE LEVERS TO LOCK
RELEASE THE MECHANISM AND ADJUST
RAISE OR LOWER MONTO
Raise or lower Monto to the
desired working height.
Release both levers to lock
Monto’s height mechanism.
3
Raise the monitor to its
highest position before
adjusting the height of
Monto.
Adjust the height of Monto to a comfortable working height.
There are a total of 9 positions.
REPOSITION MONITOR
87
Once you have adjusted the
height of Monto, adjust the
monitor to a comfortable
working height relative to
your eye level.
3.1
3.2
3.3
3.4
3.5
c
l
i
c
k
!
Step A: Push lock latches
IMPORTANT: Both lock latches must be
pushed in to operate the release levers.
Step B: Pull release levers towards you
IMPORTANT: Both levers must be pulled
to release the mechanism
c
l
i
c
k
!
WARNING
Only activate Monto’s legs when the unit is placed on all 4 feet,
otherwise serious injury may occur.
Be sure to support the weight of the
Monto platform.
A
B
A
B

WARNING
DO NOT AC TIVA TE LEG S
UNLESS THE UNIT IS PLACED
ON ALL 4 FEET, OR SERIOUS
INJURY MAY O CCU R.
WARNING
DO NOT AC TIVA TE LEG S
UNLESS TH E U NIT I S P LA CED
ON ALL 4 FEE T, OR SE RIO US
INJURY MAY O CCU R.
WA R N I N G
DO NOT OPERATE PRODUCT
UPSIDE-DOWN
Do not place Monto upside-down or activate
the legs unless the unit is placed on all 4 feet,
because serious injury may occur.
Please follow the product instructions supplied.
Instructions also available at
www.colebrookbossonsaunders.com
WARNING
TO REMOVE MONTO FROM A SURFACE
If transporting to another desk or storing Monto, use the handle recess on the underside and carry by your side.
Ensure Monto is lowered flat to the surface in its lowest
position.
Apply downwards pressure to the platform to ensure
the lock is fully engaged before lifting Monto from the
surface.
At 7kg Monto is lightweight and can be easily carried to another location or stored away if
required. A few important safety steps should be observed.
4
WARNING
DO NOT ACTIVATE LEGS
UNLESS THE UNIT IS PLACED
ON ALL 4 FEET, OR SERIOUS
INJURY MAY OCCUR.
WARNING
DO NOT ACTIVATE LEGS
UNLESS THE UNIT IS PLACED
ON ALL 4 FEET, OR SERIOUS
INJURY MAY OCCUR.
WARNING
DO NOT OPERATE PRODUCT
UPSIDE-DOWN
Do not place Monto upside-down or activate
the legs unless the unit is placed on all 4 feet,
because serious injury may occur.
Please follow the product instructions supplied.
Instructions also available at
www.colebrookbossonsaunders.com
WARNING
10
WARNING
CAUTION: Do not move/lift Monto when in a raised position.
4.2
4.1
WARNING
CAUTION: Do not activate/pull release levers whilst carrying Monto.
WARNING
CAUTION: Do not carry by sides to prevent accidental lever release.
TRANSPORTING MONTO - SAFETY
c
l
i
c
k
!
Seated Position Standing positions to suit a comfortable working height for the user
HEIGHT POSITIONS OF MONTO WITH LAPTOP
HEIGHT POSITIONS OF MONTO WITH MONITOR
Seated Position Standing positions to suit a comfortable working height for the user

www.colebrookbossonsaunders.com