Colzer PD123A User manual

COLZER Dehumidifier
User Manual
Model No.: PD123A，PD223A
Please read this User Manual before operating and keep safe for future reference.

BEFORE FIRST USE:
To prevent any internal damage, it is very important to keep refrigeration products (like this
dehumidifier) upright throughout their journey. Please leave it standing upright and outside the box
for 24 HOURS before plugging it in.

Welcome
Thanks for choosing us!
COLZER is dedicated to keeping people healthy, comfortable and more enjoyable by offering quality
appliances range from dehumidifiers, air purifiers, humidifiers to refrigerators, wine coolers, ice
makers, and more. From breathing easier in your office to upgrading your kitchen appliances, we
hope you trust COLZER to help you every step of the way.
We do hope you’ll enjoy the dehumidifier you purchased from us.
Before plugging in your new dehumidifier, we suggest that you read this user manual as it contains
important safety information, operation instructions, troubleshooting, maintenance tips, and
warranty information to ensure the reliability and longevity of your dehumidifier.
We also kindly ask you to take a few minutes to register your product at
www.colzer.com/pages/join-vip for more efficient support as well as updates, promos, and other
cool stuff. Although greatly appreciated, product registration is not required to activate any
warranty.
It is our goal that you are always happy with what you bought from us, so please let us know if your
buying experience was anything short of excellent.
We’re always just an email away
To access customer support, please email to [e-mail] with your purchase order ID to
help us address the problem faster and serve you better.
Thank you again!

CONTENTS
SAFETY INFORMATION.......................................................................................................................................................................1
PARTS IDENTIFICATION..................................................................................................................................................................... 2
CONTROL PANEL IDENTIFICATIONS............................................................................................................................................. 3
1. Understand the Top Control Panel........................................................................................................................................ 3
1) Understand the Control Buttons.................................................................................................................................. 3
2) Understand the LCD Display..........................................................................................................................................4
2. Understand the Front Display................................................................................................................................................. 5
OPERATION INSTRUACTIONS..........................................................................................................................................................5
1. Position Your Dehumidifier......................................................................................................................................................5
2. Plug in............................................................................................................................................................................................ 5
3. Turn the Dehumidifier On........................................................................................................................................................ 6
4. Select Working Mode................................................................................................................................................................ 6
1) DH (DEHUMIDIFY) Mode...............................................................................................................................................6
2) DRY (Laundry Dry) Mode...............................................................................................................................................7
5. Timer Setting................................................................................................................................................................................7
6. Drain Collected Water............................................................................................................................................................... 8
1) Emptying the Water Bucket............................................................................................................................................ 8
2) Continuous Drain by Gravity...........................................................................................................................................9
7. Smart Functions........................................................................................................................................................................ 10
1) Auto Shut Off.................................................................................................................................................................... 10
2) Wait 3 Minutes before Resuming Operation........................................................................................................... 10
3) Auto Defrost...................................................................................................................................................................... 10
4) Auto-Restart...................................................................................................................................................................... 10
MAINTENANCE....................................................................................................................................................................................11
1. Clean the Vent and Case........................................................................................................................................................ 11
2. Clean the Reservoir.................................................................................................................................................................. 11
3. Clean the Air Filter....................................................................................................................................................................11
4. When Not Using dehumidifier for Long Periods of Time............................................................................................. 12
SPECIFICATION.................................................................................................................................................................................... 13
TROUBLE SHOOTING.........................................................................................................................................................................14
1. Error Codes.................................................................................................................................................................................14
2. Reset............................................................................................................................................................................................ 14
3. Trouble Shooting......................................................................................................................................................................14
WARRANTY...........................................................................................................................................................................................16

1
『SAFETY INFORMATION』
To prevent injury to the user or other people and property damage, the following instructions
must be followed when using the dehumidifier.
1. Install the dehumidifier properly on a floor, table, or shelf that is level and strong enough to
support it when the water bucket is full.
2. Do not place the dehumidifier near a heater.
3. Do not use the dehumidifier near flammable gas or combustibles, such as gasoline, benzene,
thinner, etc.
4. Always plug into a grounded outlet properly.
5. Do not use if the power cord is broken or damaged.
6. Do not use the socket if it is loose or damaged.
7. Do not place a heavy object on the power cord and make sure that the cord is not compressed.
8. Do not modify power cord length or share the outlet with other dehumidifiers.
9. Do not operate the dehumidifier with wet hands.
10. Do not place flower vases or other water containers on top of the dehumidifier.
11. Do not climb on or sit on the dehumidifier.
12. Do not operate or turn off the dehumidifier by plugging in or unplugging the dehumidifier. Use
the control panel instead.
13. Disconnect the power if strange sounds, odors, or smoke come from the dehumidifier.
14. Hold the plug by the head when taking it out.
15. Never try to take apart or repair the dehumidifier by yourself.
16. Make sure to turn off and unplug the dehumidifier before cleaning.
17. Use a soft cloth to clean. Do not use wax, thinner, or a strong detergent.
18. Do not clean the dehumidifier with water. If water enters the dehumidifier, turn off the
dehumidifier immediately.
19. Care should be taken when using the dehumidifier in a room with the following persons: infants,
children, the elderly and people not sensitive to humidity.
20. Never insert your finger or other foreign objects into grills or openings. Take special care to warn
children of these dangers.
21. Turn off and disconnect the power when not using the dehumidifier for a long time.

2
『PARTS IDENTIFICATION』
NOTE: DO NOT OBSTRUCT THE AIR INLET AND/OR OUTLET.

3
『CONTROL PANEL IDENTIFICATIONS』
1. Understand the Top Control Panel
The top control panel features a digital display and 6 buttons.
1) Understand the Control Buttons
POWER Button: Press to turn the dehumidifier ON or OFF.
Mode Button: Press to switch the working mode between DH (DEHUMIDIFY) mode and DRY
(Laundry Dry) mode.

4
HUMIDITY Button: Press the HUMIDITY button repeatedly to adjust the set-point of humidity level
between 30%-80% (in 5% increments) during normal DEHUMIDIFY (DH) mode. The digital number
on the display will flash when changes are being made.
NOTE: The HUMIDITY button will be disabled in the DRY-CLOTHES (DRY) mode.
SPEED Button: Press the SPEED button to set the fan speed to FAST or SLOW in the normal
DEHUMIDIFY (DH) mode.
NOTE: The SPEED button will be disabled in the DRY-CLOTHES (DRY) mode.
TIMER Button: Use this TIMER button to set an AOTU-ON or AUTO-OFF timer, between 1-24 hrs.
When timer function is enabled, the system will countdown the time remaining and you can check
the time remaining by pressing the TIMER button once.
LIGHTING Button: Press the LIGHTING button to send the display to sleep status where the digital
display and the backlight of the buttons other than the POWER button and the LIGHTING button will
go off and these buttons will be disabled, while the dehumidifier maintains running status. The
indicator light above the LIGHTING button will light up in this case. Press the LIGHTING button again
to restore the backlight and functions of these buttons.
NOTE: Press and hold the SPEED button for 3-5 seconds, the LCD will show the room temperature
readout in Fahrenheit. 5 seconds later, the LCD will turn back to display the room humidity readout.
2) Understand the LCD Display
The BIG FONT Digital Number is humidity reading. If no operations on the control panel, the
number is the humidity percentage readout of the inlet air the dehumidifier detects which is similar
to the room humidity level. When you are pressing the HUMIDITY button to set the target humidity
percentage value, the digital number will turn to display the setting value and flash.
FULL: The “Full”icon will light up when the bucket is full of water, as a reminder to empty the water
bucket. Empty the bucket and re-install the bucket properly to resume regular functioning.
FAST: The “FAST”icon will light up when the FAN speed was set to high.
SLOW: The “SLOW”icon will light up when the FAN speed was set to low.
DRY: The “DRY”icon will light up when the DRY-CLOTHES mode has been selected.

5
DH: The “DH”icon will light up when the normal DEHUMIDIFY mode has been selected.
2. Understand the Front Display
The front display displays the same content, like humidity readout or error codes, as the digital
display on the top control panel. So you can read the room humidity level on the front display easily,
in a visible distance.
『OPERATION INSTRUACTIONS』
1. Position Your Dehumidifier
·Place the dehumidifier on a smooth, level floor that is strong enough to support the dehumidifier
with a full bucket of water.
·To maintain efficiency, operate the dehumidifier in
an enclosed area. Keep nearby doors and windows
closed.
·Maintain a minimum clearance of 20 cm
(7.9 inches) on the sides and back of the dehumidifier
and 40 cm (16 inches) on the top
of the dehumidifier to allow for proper
air circulation.
·To use the dehumidifier to dry wet clothes,
maintain a minimum clearance of 40 cm
(16 inches) to the air outlet of the dehumidifier to
avoid water dripping into the dehumidifier.
·The recommended ambient operating temperature
is between 5°C (41°F) and 35°C (95°F).
2. Plug in
IMPORTANT
Please let the dehumidifier stand upright for 24 hours before the first time plugging in. The
dehumidifiers may have been tilted or placed upside down during shipping. Leave the
dehumidifier to stand upright for 24 hours so the oil in the compressor can settle from the
move, not doing so can affect the performance or lifespan of the dehumidifier.

6
Uncoil the power cord and plug it firmly into a properly grounded 110-120 volt AC outlet.
After plugged in, the control panel will be light up for 1-2 seconds and then goes off, which is the
normal self-diagnose process and does not require any user intervention.
3. Turn the Dehumidifier On
Press the POWER button to turn the dehumidifier on. Typically, the dehumidifier will run in the
default setting of 30% set humidity at low fan speed in the normal DEHUMIDIFY mode.
NOTE: If the dehumidifier does not run automatically and you see the “FULL”icon illuminate, please
remove the water bucket and re-install it properly.
4. Select Working Mode
1) DH (DEHUMIDIFY) Mode
In the DH (DEHUMIDIFY) mode, the dehumidifier will automatically stop and restart based on the
humidity setting, which is called Humidstat Mode, hence maintaining the room humidity within the
range of ±3% of the set point.
For example, the set humidity is 50%, the dehumidifier will automatically stop working when the
room humidity reaches 47%, and then automatically restart when the room humidity raises up to
53%.
NOTE:
When the set humidity level is not at least 3% lower than the room humidity level, the dehumidifier
won’t start, and DH icon will flash.
When the room humidity level has been dropped down to the set-point, the dehumidifier will auto
stop dehumidifying and the DH icon will flash.
If you set the target humidity at 30%, the dehumidifier will run continuously until the water bucket
is full, which is called CONTINUOUS Mode.
To run the dehumidifier in the normal DEHUMIDIFY mode:
·Select Mode: Press the MODE button until you see the “DH”icon light up on the display to select
the normal DEHUMIDIFY mode.
·Check the Room Humidity: when no operation on the control panel, the digital number on the
display is the humidity readout of the inlet air, which is similar to the room humidity level.
·Set Your Desired Humidity: After selecting DEHUMIDIFY mode, press the HUMIDITY button
repeatedly to adjust the set-point of humidity level between 30%-80% in 5% increments. The digital
number will flash when changes are being made. The set humidity needs to be at least 5% lower
than the room humidity. After you have selected the desired value, please wait for 5 seconds until

7
the digital number turns to statically display the actual room humidity, during which time the
setting will be automatically registered.
·Let the Dehumidifier Run. The dehumidifier will automatically stop when the room humidity
reaches the target RH% or when the water bucket is full.
★You can also use the SPEED button to change the fan speed to FAST or SLOW. When the fan
speed was set to high, the “FAST”icon will light up. When the fan speed was set to low, the “SLOW”
icon will light up. High fan speed will result in quicker moisture removal.
2) DRY (Laundry Dry) Mode
Press the MODE button until you see the“DRY”icon light up on the display to select DRY-CLOTHES
mode. In the DRY-CLOTHES mode, the dehumidifier will run continuously at high fan speed. Please
note, in the DRY-CLOTHES mode, the HUMIDITY button and the SPEED button are disabled.
How to use the DRY-CLOTHES mode better?
·Hang the clothes in a small room; (maintain a minimum clearance of 40 cm (16 inches) to the air
outlet of the dehumidifier to avoid water dripping into the dehumidifier.)
·Close the windows and doors;
·Run the dehumidifier in the DRY-CLOTHES mode.
5. Timer Setting
The TIMER function enables you to either Delay AUTO-ON or Delay AUTO-OFF the dehumidifier in
the choice from 1 hour to 24 hours.
·Setting an AUTO-ON timer: When the dehumidifier is off, selecting Timer will turn the
dehumidifier on in the hours that will be set.
·Setting an AUTO-OFF timer: When the dehumidifier is on, selecting Timer will turn the
dehumidifier off in the hours that will be set.
Follow the below steps to set the TIMER:
1) Press the TIMER button once, the display will display 00 and flash;
2) Adjust the timer setting by pressing the TIMER button repeatedly to change the delay timer at
1-hour increments, up to 24 hours;
3) After selecting the target timer value, wait for 5 seconds to let the setting be registered
automatically and the digital display turns to display the room humidity percentage level;
4) The control will count down the time remaining (8,7,6, etc.) until the dehumidifier either starts
or stops. After the TIMER setting finishes, pressing the TIMER button again to check the time
remaining.
5) To disable the timer, manually turn on/off the dehumidifier or set the timer at 00.

8
Note:
·For the AUTO ON setting, please turn on the dehumidifier to select a desired humidity level.
Otherwise, the humidity maintained will be the same as the previous setting.
·You can only set AUTO ON timer when the dehumidifier is off or set AUTO OFF timer when the
dehumidifier is on, but not be able to set both AUTO ON and AUTO OFF timer at the same time.
·The TIMER feature is one-shot. So The TIMER will ONLY function one time instead of cycling the
dehumidifier on or off indefinitely.
·Before entering the AUTO ON TIMER setting, make sure power is being supplied to the
dehumidifier.
6. Drain Collected Water
1) Emptying the Water Bucket
When the bucket is full, the dehumidifier will automatically stop working and make a beep sound
for 5 seconds. Meanwhile, the LCD will display an E7 error message and the FULL BUCKET icon will
illuminate. Do not move the dehumidifier at this time in case the water spills on the floor.
To remove the bucket to empty the collected water:

9
·Gently remove the water bucket from the dehumidifier by gripping both top and bottom sides and
pulling outward;
·Open the drain outlet lid on the bucket cover and then empty the bucket;
·Replace the water bucket to the dehumidifier. The dehumidifier will auto eliminate the E7 error
and resume operation in 1-3 minutes after the water bucket been replaced properly.
2) Continuous Drain by Gravity
Water can be automatically be emptied into a floor drain by attaching the included drain hose.
NOTE: You can use any other hoses with inner diameter of 5/8 (0.63) inches instead.
To Achieve Continuous Drain by Gravity:
·Remove the plastic cover from the continuous drain outlet;
·Remove the water bucket;
·Attach the included drain hose to the drain outlet;
·Replace the water bucket to the dehumidifier properly;
·Direct the other end of the drain hose down to a suitable drainage facility, like a bigger external
bucket or floor drain. The drainage facility should be lower than the drain outlet of the dehumidifier.
Note:
- Make sure the connection is tight and there is no leaking.
If there is a small leak at the drain outlet, then try to connect the other end of the hose to the outlet,

10
since there is one end slightly smaller than another end.
- Be sure to run the water hose sloping downward to let the water flow out smoothly. No kinks or
bent.
- Do not submerge the other end of the hose into the water.
- It is recommended to use a short hose. If the drain hose is too long, water may not drain
completely, which can lead to stagnant water and mildew build up inside the hose.
- When the continuous drain feature is not being used, remove the drain hose from the outlet.
7. Smart Functions
1) Auto Shut Off
When the bucket is full and/or the room humidity reaches the set point, the dehumidifier will stop
working automatically.
2) Wait 3 Minutes before Resuming Operation
To avoid any damage to the dehumidifier, the compressor will not start operation following a
complete cycle until after 3 minutes. The operation will automatically start after 3 minutes. For
example, when the dehumidifier has been turned on immediately after being turned off, the
compressor won't start until 3 minutes later. During the 3-minutes delay start time, you can see the
Mode icon (DH or DRY) flashing which means the compressor does not kick in. When the
compressor kicks in, you can feel the dehumidifier shakes a little and the Mode icon (DH or DRY)
turns to statically illuminate.
3) Auto Defrost
When the frost builds up on the evaporator coils, the compressor will cycle off and the fan will
continue to run until the frost disappears.
4) Auto-Restart
If the dehumidifier shuts off unexpectedly due to power being cut while it is running or in standby
mode, the dehumidifier will restart with the previous function setting (working mode, set humidity,
fan speed, and etc.) automatically when the power resumes.

11
『MAINTENANCE』
To avoid possible electric shock, ensure to turn the dehumidifier off and disconnect the
plug from the power source before performing any cleaning or maintenance.
1. Clean the Vent and Case
·Use water and mild detergent. Do not use bleach or abrasives.
·Do not splash water directly onto the main dehumidifier. Doing so may cause an electric shock or
the insulation to deteriorate, or cause the dehumidifier to rust.
·The air intake and outlet vents get soiled easily, so use a vacuum attachment or brush to clean.
2. Clean the Reservoir
Every few weeks, clean the reservoir to prevent the growth of mold, mildew, and bacteria.
Follow the below steps to open the water bucket correctly to clean:
·Take out the water reservoir;
·Pick up the handle at an angle of 45°and then pull one side of the handle outward horizontally to
take the handle off; (You may see the handle slots if you take a close look, which may help you to
find the correct angle to take the handle out more easily.)
·Find the clasps on the bucket lid, press bucket inward to release the lid from the clasps;
·Partially fill the reservoir with clean water and add a little mild detergent;
·Swish it around in the reservoir, empty and rinse.
NOTE: Do not clean the reservoir in a dishwasher.
3. Clean the Air Filter
The air filter is located behind the rear intake grill to prevents dust coming into the dehumidifier.
The filter should be cleaned approximately every 2 weeks and may require more frequent cleaning
if there is significant dander or fur in the air.
Follow the steps below to clean the filter:
·Grasp the bottom of the air inlet grill and pull the grill out. The filter is attached behind the grill.
·Use a vacuum cleaner with a soft brush attachment to remove any large debris or dust build-up
from the filter.
·Wash the filter in lukewarm, soapy water, below 40°C (104°F), or use a neutral cleaning agent.
·Rinse the filter with clean water and dry thoroughly.
·Re-install the filter.
NOTE: DO NOT operate the dehumidifier without a filter because dirt and lint will clog it, reducing
performance.

12
4. When Not Using dehumidifier for Long Periods of Time
·Operate the dehumidifier on high fan mode for half a day, and then wait 1 day before emptying
the reservoir.
·Clean the main dehumidifier, water reservoir, and air filter. Ensure the whole dehumidifier is clean
and dry.
·Wrap the cord and bundle it.
·Cover the dehumidifier with a plastic bag.
·Store the dehumidifier upright in a dry, well-ventilated place.

13
『SPECIFICATION』
Model
PD123A
PD223A
Power Source
110-120V, 60Hz
110-120V, 60Hz
Humidity Removal (95°F, 90%)
30 Pints/Day
70 Pints/Day
Humidity Removal (86°F, 80%)
28 Pints/Day
51 Pints/Day
Humidity Removal (80°F, 60%)
13 Pints/Day
30 Pints/Day
Humidity Removal (65°F, 60%)
18 Pints/Day
Wattage (95°F, 90%)
250W
460W
Wattage (86°F, 80%)
210W
360W
Wattage (80°F, 60%)
185W
Wattage (65°F, 60%)
260W
Airflow Rate
112 CFM, 190 CMH
112 CFM, 190 CMH
Refrigerant
R134a/5.6 oz
R134a/8.1 oz
Protection Type of
Preventing Electric Shock
I
I
IP Level
IP21
IP21
Heat Ex-changer
Max. Operate Pressure
2.5 MPa
2.5 MPa
Air-in/out Side
Allowed Operate Pressure
0.7 MPa/2.0 MPa
0.7 MPa/2.0 MPa
High/Low Pressure Side
Max Allowed Pressure
2.5 MPa
2.5 MPa
Water Bucket Capacity
1.2 Gallon
1.2 Gallon
Product Dimensions
11.4*11.4*23.8 inch
11.4*11.4*23.8 inch
Product Weight
22 Lbs
29 Lbs

14
『TROUBLE SHOOTING』
1. Error Codes
Note:
When E1, E2, or E4 error displays, you can hear an alarm that could last 15 seconds. In this case, the
dehumidifier is still running. You can follow the below steps to eliminate the error message:
·Pressing any button on the control panel to eliminate the alarm.
·Turn off the dehumidifier and unplug it to check if any obstructions.
·Restart the dehumidifier 10 minutes later..
If the ERROR message does not disappear after the restart, immediately contact COLZER customer
service at [e-mail].
2. Reset
Please try the below steps to reset the dehumidifier if necessary:
1) Turn the dehumidifier off;
2) Press and hold the LIGHTING button for 5 seconds, until dF flashes on the LCD screen;
3) Press the MODE button once;
4) Wait for 5 seconds to let the system auto-reset to default settings.
3. Trouble Shooting
The below chart will help you solve common problems that may occur. If the problem you come
across can not be fixed after troubleshooting or the problem is not listed in the below
troubleshooting chart, please contact COLZER customer service to obtain professional support at
[e-mail].
Error Code
Problem
Solution
E1
Humidity Sensor Malfunction
1. Check the humidity sensor and ensure it is
in good condition.
2. Replace the humidity sensor.
E2
Defrost Temperature Sensor
Malfunction
1. Check the temperature sensor and ensure
it is in good condition.
2. Replace the temperature sensor.
E4
Ambient Temperature Sensor
Malfunction
1. Check the temperature sensor and ensure
it is in good condition.
2. Replace the humidity sensor.
E7
Water bucket is full.
Empty the water bucket.
The water bucket has not been
installed properly.
Re-install the water bucket properly.
Float Malfunction
Replace the float of the water bucket.

15
Problem
Possible Causes
Solutions
Dehumidifier
can not turn on
The power cord is unplugged.
Plug it in.
The fuse is blown or circuit breaker is tripped.
Check the fuse or the circuit breaker.
Dehumidifier is
on, but it does
not run.
The water bucket is full or not in the proper
position.
Make sure the water bucket is empty and has
been installed properly.
The room humidity has reached the set-point
and the dehumidifier enters into Standby
Mode where you can see the Mode icon (DH
or DRY) flickering.
Set a lower humidity or let the dehumidifier
keep in standby mode.
The room humidity is lower than the set
humidity. In this case, you can see the Mode
icon (DH or DRY) flickering.
The set humidity needs to be at least 5%
(recommend 10%) lower than room humidity.
The dehumidifier is in the defrosting process.
It is normal the compressor ceases during the
defrosting process.
Insufficient
dehumidifying
Performance
Insufficient dehumidifying time.
When first installed, allow at least 3-4 days to
maintain the desired RH.
The room has not been sealed properly.
Ensure that all doors, windows and other
openings are closed.
The air filter is dirty.
Clean the air filter.
Airflow has been blocked.
Ensure there are no obstructions block the
airflow.
There is something giving off water vapor in
the room.
Remove those items or turn off such devices
that give off vapor in the room.
The room temperature is low.
Heat up the room.
The dehumidifier size is too small for the
room.
Increase the quantity of dehumidifiers. Or
change a higher capacity dehumidifier.
Dehumidifier
operates
continuously
Check if the dehumidifier is in CONTINOUS
MODE.
Don’t set the humidity too low. Typically,
40-50% are good settings to use.
The room humidity is too high.
Change humidity settings. Or change a higher
capacity dehumidifier.
Doors and windows are open.
Ensure that all doors, windows and other
openings are closed.
Noise
The dehumidifier’s not positioned level.
Position the dehumidifier on a level surface.
The water bucket is not in the proper
position.
Re-install the water bucket properly.
The air filter is clogged.
Wash the filter.
Frost appears
on the coils
The dehumidifier has been turned on
recently.
This is normal frost builds up on the coils,
especially when the ambient temperature is
low. The dehumidifier will defrost
automatically.
Room temperature is close to or lower than
60°F.
Water leakage
Hose connection is loose.
Check the hose connection. Try to attach the
other end of the hose to the outlet.
Water does not
drain from
the hose
Hose connection is loose.
Check the hose connection. Try to attach the
other end of the hose to the outlet.
Water flow has been restricted.
Hoses more than 7 feet long may not drain
properly. It is recommended to keep the hose
as short as possible. The hose must be placed
lower than the bottom of the dehumidifier,
and be kept flat and smooth without kinks.

16
『WARRANTY』
COLZER offers a limited 1-year free warranty on this dehumidifier PD123A/PD223A, with original
proof of purchase (typically you maybe only requested to offer the order number instead of an
invoice) and where a defect has arisen, wholly or substantially, as a result of faulty manufacture,
parts or workmanship during the warranty period.
The warranty does not apply where damage is caused by other factors, including without limitation:
(a) normal wear and tear;
(b) abuse, mishandling, accident, or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles;
(d) servicing or modifications of the product other than by COLZER.
The COLZER warranty covers all costs related to restoring the proven defective product through
repair or replacement of any defective part and necessary labor so that it conforms to its original
specifications. A replacement product may be provided instead of repairing a defective product.
COLZER's exclusive obligation under this warranty is limited to such repair or replacement.
We recommend that you register your product on our website www.colzer.com/pages/join-vip.
Although greatly appreciated, the product registration is not required to activate any warranty and
product registration does not eliminate the need for the original proof of purchase.
These are our general terms for warranty service, but we always urge our customers to reach out to
us with any issue, regardless of warranty terms. If you have an issue with a COLZER product, please
contact us at [e-mail], and we will do our best to resolve it for you.
Email
[e-mail]
Website
www.colzer.com