Comfee CLV09N1AMG User manual

Washing Machine
OWNER’S MANUAL
Before using your washing machine, please read
this manual carefully and keep it for future reference.
Read This Manual
Inside you will find many helpful hints on how
to use and maintain your washing machine properly.
Just a little preventative care on your part can
save you a great deal of time and money over
the life of your washing machine. You'll find many
answers to common problems in the chart of
troubleshooting tips. If you review the chart of
Troubleshooting Tips first, you may not need
to call for service.
CLV09N1AMG
Midea America Corp.
5 Sylvan Way, Parsippany, NJ, USA 07054
Customer Service 866-646-4332
www.midea.com

Bottom cover
17.7in.
450mm
31.5in. 800mm
41.3in.
1050mm
min 1in.
25mm
min 1in.
25mm

Step 1: Move your washer to selected position
Tilt the unit back onto its rear rollers and push it forward as shown in the figure
below. Move the unit to a location as described in the previous Choose the Proper
Location section.
Make sure the location has a hard, level surface without carpeting.
There should be no direct sunlight.
Do not expose the unit to freezing temperatures (under 32° F or 0° C).
Front of the
washer
Back of the
washer
O
60~70
WARNING
Comfee

Pull down on the white ring
to divide the adaptor into
two parts.
Top part: Faucet fitting
Bottom part: Hose fitting
Rubber gasket
Inner threads for outer threaded faucet.
Outer threads for inner threaded faucet
2.Connect the ends of the water supply hoses to the
faucets. For convenience, use the Quick Connection
for connection to the cold water faucet. See instructions
Connection Adaptor use in Step 1 above.
COLD
Adaptor
for
Quick
Cold
NOTE:
When connected to a single faucet, be sure to only run cold water washers.

loosen lock
Adjustable legs
Make sure that the connection between the drain hose and the wash basin,
standpipe or laundry tub is not airtight.
WARNING