Comfort Plus Adjustable Bed Parts list manual

The Art of Relaxation
Adjustable Bed
Operating and Usage
Instructions

We are always keen to improve our
products, so if you have any comments
regarding your purchase, please do not
hesitate to contact our Customer Service
Department on 01462 678050.
Operating Instructions
Before using this product, you must
thoroughly read the Operating Instructions.
A few minutes spent doing this will allow you
to fully understand all the functions of the
product.
Thank you
Thank you for choosing a Comfort Plus Adjustable Bed.
Your new Bed has been handmade by craftsman
in England, and monitored carefully throughout the
numerous stages of manufacturing. We know that when
used correctly, it will provide you with many years of
excellent and reliable service.
Assembly
As part of our dedicated service to our customers, all of our beds are assembled on site,
by our professionally trained technicians.
In the event of needing to relocate the bed, please call us on 01462 678050. Dis-
assembling the product yourself may invalidate your lifetime guarantee.
3

Operation of the Bed
4
The diagram of the handset describes the
function of each button. Please take a few
moments to acquaint yourself with its features.
Should you experience any operating
problems with your bed, please check the
following:
1Check that the plug is in the wall
socket and it is switched on.
2Check that the wall socket works
by plugging in another working
appliance, ie table lamp.
3Check that the batteries in the
handset are working.
If your bed is still not working, please contact
our customer service department on 01462
678050.
Handset
Trouble shooting
OPERATING INSTRUCTIONS FOR
ADJUSTABLE BED HANDSET
S1 - Raises back section
S2 - Lowers back section
S3 - Raises foot section
S4 - Lowers foot section
S5 - Raises back and foot section together
S6 - Lowers back and foot section together
S1 S2
S3 S4
S5 S6
FOR BEDS OPERATING WITH A CORDED HANDSET

1. Upper back
3. Upper thigh
1. Upper back
2. Lower back
4. Lower thigh
5. Calf region
5
Your massage system explained
1Power
Switches the massage system
on/off. It is programmed to allow 15
minutes continuous use and will then
automatically switch off.
2Zones
The numbered zones relate
to the zones pictured on the
mattress below.
3Intensity
Increases or decreases the
intensity from a relaxing to a more
vigorous massage.
4Speed
Increases or decreases speed of the
cycle when in “wave” mode.
5Modes
Wave: Operates each zone in
turn in a waving motion, from the
top to the bottom of the mattress.
Pulse: Offers short bursts of
power to the selected Zones.
Select: Offers continuous
massage of the selected Zones.
PWR
WAVE PULSE SELECT
12345
+
-
+
-
Important information
If you suffer from a diagnosed
medical condition and you are
not sure if you should use the
Relaxor Massage System, please
consult a medical practitioner
before use. This would include
any fitted medical devices such
as pacemakers.
We recommend that the massage
unit be used only for a few minutes
initially to allow your body to get
used to the massage sensation.
Gradually increase the length of
time over the first few periods of
use. Should you experience any
adverse reaction, please consult
your medical practitioner straight
away.
The picture below shows the 5 massage zones that are contained within your mattress (if
fitted). The diagram of the massage handset, is explained below:
PWR
WAVE
PULSE
SELECT
1
2
3
4
5
++
- -
Modes
Zones

Care of your recliner
1
Operation of the Bed
FOR BEDS OPERATING WITH A CORDLESS HANDSET
This system incorporates a handset that does not have a lead to the motor and uses radio wave
technology to communicate between the operating handset and the bed motor. The handset for
the cordless system will look similar to the one shown in the picture below.
Operation of the bed
The diagram of the handset describes the function of each button.
Please take a few moments to acquant yourself with its features.
Handset
6
Should you experience any operating problems with your bed, please check the following:
Trouble shooting
1. Check the plug is firmly in the wall and that the socket is switched on.
2. Check that the wall socket works by plugging in another working
appliance i.e a table lamp
3. When the bed is commisioned by us, we have to synchronize the
operating handset to the motor to ensure it has its own radio frequency to operate with.
It is posible that this connection can be lost, i.e if you suffer a prolonged power cut for
example. In this scenario, please follow the steps below to re-establish the connection:
1. Unplug the bed from the mains electrical socket
2. Remove the batteries from the bed motor
3. Leave for approximately 30 seconds
4. Plug back into the electrical socket, but do not switch the power on
5. Press buttons S7 and S8 simultaneously until the light on the handset flashes
6. Switch the electrical power on at the wall and you will hear a beep from the motor.
7. Reconnect the batteries in the motor
If you have any problems, please contact our customer service department on 01462 678050

1
CORDLESS HANDSET OPERATION
S1
S2
S3
S7
S8
S9
S10
S11
S12
S14
S4
S5
S6
S13
- Memory feature
3 memory options
that you can set
to suit you
- For using a bed side table lamp
(Optional)
- Underbed lighting strip function
- Lowers the head end and foot end
together
- Raises the head end and foot end
together
- Lowers head only
- Raises head end only
- Lowers footend only
- Raises foot end only
- Iluminates light feature on handset
- Handset light
S1
S4
S5
S6
S2
S3
S7
S8
S9
S10
S11
S12
S13
S14 7
Your bed comes with 3 memory options, you can store 3 positions that you
prefer and at the touch of either buttons 1, 2 or 3, your bed will move to this
position automatically. To use this feature firstly put the bed in a comfortable
position that you wish to store to memory. Next, push the S button 3 times,
you then have 4 seconds to choose and press either S4, S5 or S6.
Once pressed you will hear a beep from the motor and the light on the
handset (S14) will illuminate. Then whenever you press the corresponding
button, the bed will automatically move to the stored position. Please note
that whenever you change a stored position, the bed can only remember the
last position stored.
USING THE MEMORY FUNCTIONS
}

Care of your recliner
1
8
Your prestige massage system explained
Important information
If you suffer from a diagnosed
medical condition and you
are not sure if you should use
the Relaxor Massage System,
please consult a medical
practitioner before use. This
would include any fitted medical
devices such as pacemakers.
We recommend that the
massage unit be used only for
a few minutes initially to allow
your body to get used to the
massage sensation. Gradually
increase the length of time over
the first few periods of use.
Should you experience any
adverse reaction, please consult
your medical practitioner
straight away.
C. Upper thigh
A. Upper back
B. Lower back
D. Lower thigh
E. Calf region
Massage zone
Intensity
Zone selection
Intensity
Power (On/Off)
Alternative
massage
types
A
B
C
D
E
1Power
Switches the massage system
on/off. It is programmed to allow 15
minutes continuous use and will then
automatically switch off.
2Zones
The numbered zones relate
to the zones pictured on the
mattress below.
3Intensity
Increases or decreases the
intensity from a relaxing to a more
vigorous massage.
5Modes
Wave: Operates each zone in
turn in a waving motion, from the
top to the bottom of the mattress.
Pulse: Offers short bursts of
power to the selected Zones.
Select: Offers continuous
massage of the selected Zones.
The picture below shows the 5 massage zones that are contained within your mattress (if
fitted). The diagram of the massage handset, is explained below:

1
9
Additional Options Explained
If purchased, the following may be applicable (Only available on cordless beds) :
Underbed Lighting strip
Underneath the bed may be fitted a “lighting strip” when the underbed lighting strip button (S3) see
page 7 is pressed on the cordless handset, the strip will light the floor at the side of the bed to help with
getting out of the bed in the middle of the night. This feature is designed for use in a dark room, the light
may not be visible in an already lit room. To switch off the light, press the same button (S3) on the cord-
less handset.
In the event of the lighting strip not working, please ensure the lead running from the strip under the bed
is connected firmly to the motor of the bed.
Lamp Box Unit
Supplied with the bed is a separate Lamp Box Unit which enables a bedside lamp to be plugged into
the box which can then be operated from the cordless handset control using the “S2” button see page
7. The lamp and lamp box unit can be positioned anywhere in the room.
In the event of the lamp box unit not working, please complete the following :
1.Unplug the lamp from the lamp box unit.
2.Plug the lamp directly into a wall socket and switch the lamp to the “on” position ensuring it lights up.
3.Unplug the lamp from the wall, DO NOT switch the lamp “off”.
4.Ensure the lamp box unit is firmly plugged into the wall socket and the power is switched on.
5.Plug the lamp back into the lamp box.
6.Press buttons S7 and S8 simultaneously on the control handset until the light on the handset flashes.
7.Locate the red slide switch on the Lamp Box Unit, slide the switch one way, then slide it back again.
8.The light on the handset should stop flashing, and the lamp can now be operated from the control
handset using button “S2”.

10
Getting maximum benet
from your adjustable bed
1Lift the head end of the
bed up to the position that
you feel comfortable in. Do
this with only 1 pillow on
the bed. An adjustable bed
should do the work that
previously many pillows
may have done.
2Lift the leg end of the
bed up to a point where
it is comfortable for you.
At this point many people
experience an easing of
pressure in their back, so
aiding a good nights sleep.
3Always re-adjust the bed
each night, to suit your
needs at that particular
time. Do not just leave the
bed in a set position night
after night.
4Many clients recommend
a strong massage for 5 –
10 minutes first thing in
the morning to aid mobility
when first getting out of
bed.