comfortel 8040 User manual

help.comfortel.com.au
#8040 SALON MIRROR JOINER POLE #8041 BASE PLATE
salon mirror
pole joiner
owners manual

SPECIFICATIONS
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
WEIGHT
36kg
79Ibs
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON MIRROR & FLOOR TYPE.
NO RESPONSIBILITY IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
PLEASE REFER TO MIRROR USER
GUIDE WHEN INSTALLING TO
DETERMINE BEST PRACTICE
MOUNTING.
IMPORTANT
FRONT
MIN HEIGHT
WITH BASE PLATE
OPTION
MAX HEIGHT
WITH BASE PLATE
OPTION
SIDE

GET STARTED: INSIDE THE BOX
1PC 1PC
2PCS
1PC
2PCS 1PC 2PCS
2PCS4PCS
4PCS 4PCS
4PCS 6PCS 4PCS
M8X75MMM8X80MM
M8X20MM M8X20MM
FOR FOOTRESTS
M6X10MM M8 NUT M6 NUT
4PCS
#8040 SALON MIRROR JOINER POLE
MOUNTING ATTACHMENT OPTIONS
REFER TO SALON MIRROR TO DETERMINE WHICH MOUNTING POSITION & ATTACHMENT
IS REQUIRED FOR INSTALLATION OF MIRROR.
#8041 SALON MIRROR POLE JOINER BASE PLATE
MIRROR
MOUNTING RIG
MOUNTING RIG
(HALO ONLY)
BASE PLATE
ROUND BENCH BENCH BRACKET HOOK

GET STARTED: UNDERSTANDING MOUNTING POSITIONS
MOUNT POSITION 1
MOUNT POSITION 1
MOUNT POSITION 2
MOUNT POSITION 2
MOUNTING POSITIONS
BEFORE ASSEMBLY, REFER TO 'SALON MIRROR MOUNTING POSITIONS'
WITHIN THIS DOCUMENT TO DETERMINE WHICH MOUNTING POSITION &
ATTACHMENT IS REQUIRED FOR INSTALLATION OF MIRRORS.

GET STARTED: POWER TO LED MIRRORS
CABLE HOLE
RUN POWER TO HERE TO
CONNECT TO LED MIRRORS
POWER ACCESS FROM CEILING
THROUGH POLE EXTENTION / MAIN POLE
(MUST BE DONE BY ELECTRICIAN)
TO CONNECT POWER TO LED MIRRORS,
POWER CAN RUN FROM THE CEILING,
DOWN THE POLE TO CABLE HOLE TO
POWER LED MIRRORS

BASE POLE
STEP 1
SLIDE BASE COVER
OVER BASE POLE
MOUNT TO FLOOR
(BOLTS NOT INCLUDED)
PART POLE QTY
MOUNT TO CEILING
(BOLTS NOT INCLUDED)
ASSEMBLY: MIRROR JOINER POLE
IT MUST BE BOLTED TO THE GROUND WHEN USING IT AS A POLE ONLY

BASE PLATE
PART POLE QTY
PART BASE PLATE QTY
BASE POLE
STEP 1
SLIDE BASE COVER
OVER BASE POLE
MOUNT TO CEILING
(BOLTS NOT INCLUDED)
ASSEMBLY: BASE PLATE OPTION

ASSEMBLY: FOOTRESTS OPTION
FINAL
4PCS
M8X20MM
INCLUDED WITH
BASE PLATE

USE MOUNT POSITION 2
MOUNT POSITION 1
MOUNTING POSITION: CIRCA, NERO & ARCH LED
2PCS 2PCS
MIRROR
MOUNTING RIG
ATTACHMENTS REQUIRED:
ROUND BENCH
4PCS
HOOK

MOUNTING POSITION: OVAL LED & ONYX
4PCS
HOOK
ATTACHMENTS REQUIRED:
2PCS 2PCS
MIRROR
MOUNTING RIG ROUND BENCH
USE MOUNT POSITION 1
MOUNT POSITION 2