Commax DRC-22BS User manual

◆ Package contents
Specification
Name
Spec.
Seonsor Type
Wiring
Related voltage
Transmission
Effective Viewing Angle
Bradcasting
Minimum Illumination
Operating Temperature
Dimension
weight
B/W C.C.D” 1/3 COLOR C.C.D 1/4”
2 wires(Non-Polarity)
DC 12V(powered from a mointor)
Full duplex
Horzontal 75ŇVertical 55Ň
15.625KHz/50Hz, 15.734/60Hz
OLUX(within 300mm)
-10℃ ~ +40℃
99.5(W)×141.5(H)×37(D)
300g
color@door@camera
with@R@wires@
drcMRRbsORRcs
DRC-22BS DRC-22CS
• Thank you for purchasing our COMMAX product.
• Please carefully read this User Guide (in particular, precautions for safety)
before using the product and follow the instructions to use your productexactly.
• The company is not responsible for any safety accidents caused in abnormal
operation of the product.
SCREW : T4X18mm 2EA, M3X10mm 1EA
Manual

UP
ᮃ
;+:-?
5Ŧ UU
;+:-?
<Ŧ UU
ڹںڻڼ
47?-:
=88-:
=8ᮃ
5
1
2
4
12
3
6
11
87
13
9
KU
60cm
KU

 
,:+*;
,:++;
,8>40
+,>)
Part Names.
Wiring and Installation.
7. Monitor Connection terminal.
8. Description Label.
9. Bracket mounting a wall
10. Dimension(mm) : 99.5(W) x 141.5(H) x 37(D)
11. Angle adjustment lever.
12. Power lamp : When talking with a monitor, it is on.
13. Door Release connection terminal
1. Protection shield.
2. Lamp at night
3. C.C.D Camera Lens
4. Speaker
5. MIC.
6. Call button.
1. Fix a bracket to wall with screws (M3 x 10mm) supplied.
2. Please fix the desired angle of a lens with angle adjustment lever before fixing it.
3. Put a camera unit into a bracket.
4. Recheck the desired position of a camera unit to be installed through the image
of a monitor.
A Monitor A door camera unit