Commax DRC-4BH User manual

U
Us se er r M Ma an nu ua al l
D
DO OO OR R C CA AM ME ER RA A DRC-4BH/4CH
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
Printed In Korea/ 2010.03.101
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
U
Us se er r M Ma an nu ua al l
D
DO OO OR R C CA AM ME ER RA A DRC-4BH/4CH
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
Printed In Korea/ 2010.03.101
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
User Manual
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.


10
Memo
10
Memo

2
1. Introdution ........................................................................... 3
2. Important Safeguard ........................................................... 4
3. Overview ............................................................................. 5
4. Wiring And Installation ........................................................ 7
5. Package .............................................................................. 8
6. Specification........................................................................ 9
Contents
9
6. Specification
Model No.
DRC-4BH DRC-4CH
Rated voltage/Current DC 12V (Supplied to monitor) DC 12V (Supplied to monitor)
consumption
Wiring(Main Unit/Switch) 4-wire system (polar) / 2-wire 4-wire system (polar) / 2-wire
system (non-polar) system (non-polar)
CCD 1/3″(Solid CCD) C.C.D (Solid state imaging device)
Communication Simultaneous communication Voice switching
Broadcasting EIA(15.734KHz/60Hz) NTSC Standard
/CCIR(15.625KHz/50Hz)
Horizontal/vertical 0 Lux(Up to 300mm from the front 0.1 Lux (Up to 300mm from the front
scan frequency of the camera) of the camera)
Lighting Infrared LED built-in built-in white LED (operated at a night time)
Camera angle Horizontal 68°, vertical 55°Horizontal 75°, vertical 55°
Angle adjustment Upward 13°, downward 13°Upward 13°, downward 13°
Operation temperature -10℃~ + 50℃-10℃~ + 50℃
Weight (g) 680g 680g
Dimensions (mm) 116(W) x 169(H) x 42.5(D) 116(W) x 169(H) x 42.5(D)
Transmission
distance (TIV Cable)
group(M)
Dianeter(pie)
0.5 0.65 0.8 1
28 50 70 115
2
1. Introdution ........................................................................... 3
2. Important Safeguard ........................................................... 4
3. Overview ............................................................................. 5
4. Wiring And Installation ........................................................ 7
5. Package .............................................................................. 8
6. Specification........................................................................ 9
Contents
9
6. Specification
Model No.
DRC-4BH DRC-4CH
Rated voltage/Current DC 12V (Supplied to monitor) DC 12V (Supplied to monitor)
consumption
Wiring(Main Unit/Switch) 4-wire system (polar) / 2-wire 4-wire system (polar) / 2-wire
system (non-polar) system (non-polar)
CCD 1/3″(Solid CCD) C.C.D (Solid state imaging device)
Communication Simultaneous communication Voice switching
Broadcasting EIA(15.734KHz/60Hz) NTSC Standard
/CCIR(15.625KHz/50Hz)
Horizontal/vertical 0 Lux(Up to 300mm from the front 0.1 Lux (Up to 300mm from the front
scan frequency of the camera) of the camera)
Lighting Infrared LED built-in built-in white LED (operated at a night time)
Camera angle Horizontal 68°, vertical 55°Horizontal 75°, vertical 55°
Angle adjustment Upward 13°, downward 13°Upward 13°, downward 13°
Operation temperature -10℃~ + 50℃-10℃~ + 50℃
Weight (g) 680g 680g
Dimensions (mm) 116(W) x 169(H) x 42.5(D) 116(W) x 169(H) x 42.5(D)
Transmission
distance (TIV Cable)
group(M)
Dianeter(pie)
0.5 0.65 0.8 1
28 50 70 115

3
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“dangerous Voltage” ”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance
1. Introdution
CAUTION: To reduce the risk of electrix shick, do not remove cover(or back) no user-serviceable
part sinside refer servicing to quaured service personnel
caution
Rosk of electric shock
do not open
8
5. Package
3
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“dangerous Voltage” ”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance
1. Introdution
CAUTION: To reduce the risk of electrix shick, do not remove cover(or back) no user-serviceable
part sinside refer servicing to quaured service personnel
caution
Rosk of electric shock
do not open
8
5. Package

7
4. Wiring And Installation
1. Fix it by adjusting the hole in the installation wall and bracket hole.(SCREW T4×18)[FIG-1]
2. Wire the residence monitor cables as shown in the figure.[FIG-2](#1:VOICE, #2:GND, #3:DC12V, #4:VIDEO)
3. Wire the door release as shown in the figure.[FIG-2]( #5,#6)
4. Fix it by using screw (M4×8) and then put on the rubber-cap.[FIG-1]
5. Put on the name card cover.[FIG-1]
j
t

jt
t
j
jt
r
kyjT[joTOluPT㠄⸬\UGGGYWW`TWXTYWGGGÅÆÆĂGXWa[ZaWX
4
2. Important Safeguard
D
Da am ma ag ge e R Re eq qu ui ir ri in ng g S Se er rv vi ic ce e: This equipment from the power source and source and refer servicing to qualified service person-
nel under the following conditions:
ⓐwhen the power is damaged.
ⓑif liquid has been spiled or objects have hallen into the unit
ⓒif the equipment has been exposed to rain or water.
ⓓif the equipment has beem dropped or otherwise damaged.
ⓔwhen the equipment exhibits a distinct change in performance- this indicates a need for service.
W
Wa at te er r a an nd d M Mo oi is st tu ur re e: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundru tub,
in a wet basement, or near a swimming pool, and the like.
A
Ac cc ce es ss so or ri ie es s: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any mount-
ing of the manufacture’s insturctions, and should use a mounting accessory recommended by the manufacturer.
O
Ob bj je ec ct t a an nd d L Li iq qu ui id d E En nt tr ry y: Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
L
Li ig gh ht tn ni in ng g: For added protection for this product before a lihgtning storm, or when it is left un attached and un used for long
periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the prod-
uct due to lightming and power-line surges. If you live in an ared heavily prone to lightning stoms, it is recom-
mended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect
your appliance system from possiple damage
▲
▲
▲
▲
▲
7
4. Wiring And Installation
1. Fix it by adjusting the hole in the installation wall and bracket hole.(SCREW T4×18)[FIG-1]
2. Wire the residence monitor cables as shown in the figure.[FIG-2](#1:VOICE, #2:GND, #3:DC12V, #4:VIDEO)
3. Wire the door release as shown in the figure.[FIG-2]( #5,#6)
4. Fix it by using screw (M4×8) and then put on the rubber-cap.[FIG-1]
5. Put on the name card cover.[FIG-1]
4
2. Important Safeguard
D
Da am ma ag ge e R Re eq qu ui ir ri in ng g S Se er rv vi ic ce e: This equipment from the power source and source and refer servicing to qualified service person-
nel under the following conditions:
ⓐwhen the power is damaged.
ⓑif liquid has been spiled or objects have hallen into the unit
ⓒif the equipment has been exposed to rain or water.
ⓓif the equipment has beem dropped or otherwise damaged.
ⓔwhen the equipment exhibits a distinct change in performance- this indicates a need for service.
W
Wa at te er r a an nd d M Mo oi is st tu ur re e: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundru tub,
in a wet basement, or near a swimming pool, and the like.
A
Ac cc ce es ss so or ri ie es s: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any mount-
ing of the manufacture’s insturctions, and should use a mounting accessory recommended by the manufacturer.
O
Ob bj je ec ct t a an nd d L Li iq qu ui id d E En nt tr ry y: Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
L
Li ig gh ht tn ni in ng g: For added protection for this product before a lihgtning storm, or when it is left un attached and un used for long
periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the prod-
uct due to lightming and power-line surges. If you live in an ared heavily prone to lightning stoms, it is recom-
mended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect
your appliance system from possiple damage
▲
▲
▲
▲
▲
j
t

jt
t
j
jt
r
kyjT[joTOluPT㠄⸬\UGGGYWW`TWXTYWGGGÅÆÆĂGXWa[ZaWX
[FIG-1] [FIG-3]
[FIG-2]
[FIG-1] [FIG-3]
[FIG-2]

5
3. Overview
6
1 Front panel
2 LED Since it acts as lighting at night, it provides better picture quality.
3 Camera lens It delivers images. (Make sure to keep it clean to prevent dust)
4Microphone It delivers voices at a time of communication with residences.
5 Call button It is pressed to call a residence.
6 Speaker It delivers voice from a residence.
7 Name Card
Angle fiell of view camera Use it to adjust the angle of the view of visitors according to installation envi-
ronment.
Monitor & Door release It connects monitor (careful about polarity) to a door release.
connection terminal
10 Vdume Contrd
11 Screw hole
12 Wall bracket
No. Name Details
5
3. Overview
6
1 Front panel
2 LED Since it acts as lighting at night, it provides better picture quality.
3 Camera lens It delivers images. (Make sure to keep it clean to prevent dust)
4 Microphone It delivers voices at a time of communication with residences.
5Call button It is pressed to call a residence.
6Speaker It delivers voice from a residence.
7 Name Card
Angle fiell of view camera Use it to adjust the angle of the view of visitors according to installation envi-
ronment.
Monitor & Door release It connects monitor (careful about polarity) to a door release.
connection terminal
10 Vdume Contrd
11 Screw hole
12 Wall bracket
No. Name Details
8
9
8
9