Commercial Electric S10CNPY/850/BZ/HD User manual
USE AND CARE GUIDE
LED OUTDOOR COMMERCIAL CANOPY
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
SKU #1008 376 336
Model #S10CNPY/850/BZ/HD
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED Outdoor Commercial Canopy.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products
available for your home improvement needs. Thank you for choosing Commercial Electric!
WARNING: Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
WARNING: RISK OF CUTS. Some metal parts in the xture
may have sharp edges. To prevent cuts and scrapes, wear
gloves when handling the parts.
WARNING: RISK OF SHOCK. House electric current can cause
painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker before
installing the xture, in order to prevent possible shock.
NOTICE: All electrical connections must be in accordance with local
and National Electrical Code (N.E.C.) standards. If you are unfamiliar with
proper electrical wiring connections obtain the services of a qualied
electrician.
Remove the xture and the mounting package from the box and make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help. Any changes or modications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
S10CNPY/850/BZ/HD
Table of Contents
Safety Information
Limited Warranty
Table of Contents ...................................2
Safety Information ..................................2
Warranty ..........................................2
Pre-Installation.....................................3
Tools Required ....................................3
Hardware Included.................................3
Installation ........................................4
For your safety, always remember to:
□Turn off the power supply at the fuse or circuit breaker box
before you install the xture.
□Ground the xture to avoid potential electric shock and to
ensure reliable starting.
□Double-check all connections to be sure they are
tight and correct.
□Wear rubber soled shoes and work on a sturdy
wooden ladder.
□Account for small parts and destroy packing material, as these
may be hazardous to children.
This xture is designed for use in a circuit protected by a fuse or circuit
breaker. It is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualied
electrician or local electrical inspector, and check your local electrical code.
Account for small parts and destroy packing material, as these may be
hazardous to children.
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
Product Specifications:
• 120 VAC, 60 Hz, 45 Watts
• Not Dimmable
• Wet Location
2
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Part Description Quantity
AA Outdoor Commercial Canopy 1
BB Mounting Bracket 1
CC
DD
EE
FF
Wire Nuts
Plastic Anchors
#10 2 in. Wood Screws
J-Box Mounting Screws
3
4
4
2
PACKAGE CONTENTS
TOOLS REQUIRED
Phillips
screwdriver
Pre-Installation
NOTE: Hardware not shown to actual size.
AA BB CC
Drill Drill bit
DD EE FF
3
Junction Mount Installation
2 Removing Mounting Plate
3 Connecting the Wires
6 Securing the Fixture
4 Hanging the Canopy
5 Locking the Canopy
□Make sure the power is off. Feed the power supply
wires through the center of the Mounting Plate (BB).
Attach the Mounting Plate (BB) onto the Junction Box
with J-box Mounting Screws (FF).
□Once the Canopy Fixture (AA) is in the xed position,
fasten screw “A” to lock the xture into place.
□Hang the Canopy Fixture (AA) on
the Mounting Plate (BB) and
nish wiring. See wiring
diagram A below.
□Feed the wires into the J-Box. Lock the
Canopy Fixture (AA) towards the
Mounting Plate (BB) hooks.
□Loosen screw “A” on the side of the Canopy Fixture (AA)
and remove the Mounting Plate (BB).
1 Turning Off the Power
□Turn the power OFF at the switch and
fusebox or the circuit breaker.
Lock
BB
BB
AA
Screw A
Screw A
BB
FF
AA
DD
EE
AA
AA
BB
AA
Reflector
Diffuser Lens
4
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Lift
AA
Surface Mount Installation
2 Removing Mounting Plate
5 Mounting the Canopy
6 Connecting to a Power Source
7 Re-assembling the Canopy
□Add caulking on the three holes of the gasket where
the wires were passing through. Hang the canopy (AA)
xture on the mounting plate (BB) and lock the canopy
(AA) towards the mounting plate (BB) hooks.
□Position Mounting Plate (BB) and mark location for
4 Wood Screws. Drill holes and insert Plastic Anchors (DD).
□Attach Mounting Plate (BB) by securing 4 Wood Screws
(EE) to Plastic Anchors (DD).
□Make sure power is off. Remove the 1/2 inch plug from
the direction you intend to feed the conduit. Connect
the power supply wires to the xture. See the wiring
diagram A below.
□Assemble the reector and diffuser lens back on the
canopy (AA) xture.
□Loosen screw “A” on the side of the Canopy Fixture (AA)
and remove the Mounting Plate (BB).
1 Turning Off the Power
4 Disassembling the Canopy
3 Attaching Mounting Plate
□Turn the power OFF at the switch and
fusebox or the circuit breaker.
□Disassemble the canopy (AA) xture by using a phillips
screwdriver to loosen the eight crews holding the
diffuser lens. Remove the diffuser lens and the reector
from the xture, then pull the wires (black, white and
green) into the xture’s cavity.
Lock
Lock
BB
Hooks
BB
AA
DD
EE
Screw A Screw A
AA
AA
Reflector
Reflector
Diffuser Lens
Diffuser Lens
IMPORTANT: Once the
canopy xture is in the xed
position, fasten screw “A” to
lock the xture into place.
Supply Line (Black)
Supply Neutral (White)
Supply Grounding (Green/Yellow) J-Box Grounding (Green)
Neutral (White)
Line (Black)
LED
DRIVER
Twist-on wire connector
Connector
to LED
WIRING DIAGRAM A
5
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.
This manual suits for next models
1
Table of contents
