
© 2005 by Community Products, LLC
PB72 DC L2297 Revision K
CUSTOMER SERVICE:
United States
PO Box 2
Ulster Park, NY 12487
Office hours: 9-5 EST
Phone (800) 777-4244
Fax (800) 336-5948
(845) 572-3468
www.CommunityPlaythings.com
Sales@CommunityPlaythings.com
United Kingdom
Robertsbridge
E. Sussex TN32 5DR
Phone 0800 387 457
Fax +44 (0)1304 843 731
www.CommunityPlaythings.co.uk
Sales@CommunityPlaythings.co.uk
Page 2
Maintenance
Information
J422, J424 Mealtime Chair
J421, J423 Mealtime Chair
J442, J444 Mealtime Chair
J441, J443 Mealtime Chair
Assembly
Your shipment comes in one carton containing:
1. One Mealtime Chair.
2. Product Guide.
To attach seat belt, thread buckle up through gap
at back of seat and push clips into indentations on
back (see fig. A).
To attach Mealtime Seat, stand in front of chair
and place Seat against back of chair. Push down on
inside of armrests to latch in place (see fig. B). To
remove Mealtime Seat, grasp handles, push thumbs
down on inside of armrests and pull up and out
with your fingers to release latches.
To attach Tray to Mealtime Chair, slide it over arm-
rests of Mealtime Seat until both latches engage
in armrest holes. To remove or adjust Tray, pull on
latches to disengage from armrest holes.
If your shipment is incomplete, please call
Customer Service.
Accessories
• J413 Chair Dolly
• J425 Tray
Maintenance
Periodically inspect for cracks, breaks, loose parts,
loose screws, missing parts, and/or malfunctions.
Remove product from service when any condition
develops that might make operation unsafe.
Cleaning
Wipe wooden chair with damp cloth and mild deter-
gent or disinfectant. Do not use excessive water.
Seat belt is removable and machine washable.
Clean plastic tray and seat with any mild soap or
detergent. Avoid abrasive cleaners, aromatic spirits,
and cleaning solutions containing pine oil (such as
Lysol®). Some of these agents can cause plastic to
weaken and crack.
Do not use rinse cycles in excess of 165° when
washing Tray or adhesive may fail.
Construction
Wooden components are manufactured from durable
hardwood plywood or solid maple and finished with
a clear finish. All edges and corners are rounded for
safety and ease of cleaning. Tray and plastic seat are
smooth, washable plastic. Seat belt is made of sturdy
polypropylene webbing and the locking buckle and
attachment clips are made of durable plastic. Chair
tips are molded from an elastomer.
User Modifications
We are not responsible for modifications made by
customers to our products in the field, without our
supervision, testing or evaluation.
Ordering Parts
To order replacement parts, contact Customer Ser-
vice with a description of the part(s) needed and the
ID Code from the product.
Use only replacement parts supplied by
Community Playthings.
Figure B
Figure A