LETTER
8.5” X 11”
SBDR1502–Duke OH IT801 Thermostat Installer Manual (DirectLink)
Piece: Manual
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COPY COPY RITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Specific Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1502
T801 nstall Manual (DirectLink)
Job Opened: May 8, 2015
Requested In-Home Date: ______________
Latest Revision: August 26, 2015 October 5, 2015 November 2, 2015
Approved: November 2, 2015
T801 Web-Programmable Thermostat Manual
P OG AMMING THE THE MOSTAT
Set Program
The ntelliTEMP DirectLink is shipped with an energy-saving schedule pre-programmed. You can customize this default
program by following the steps below if the pre-programmed schedule is not ideal for your needs.
Set Program Schedule
1. From the main operating screen, press MENU.
2. Press SCHED.
NOTE: Mo is displayed to indicate that Monday’s Time of Day (TOD) schedule is selected. HEAT is displayed to indicate
that the heat mode programming is selected. The first TOD period* for your configuration is displayed to indicate the TOD
period being programmed.
NOTE: To program the COOL schedule, press the SYSTEM button until COOL is displayed and follow steps 3 through 10.
3. Time is flashing to indicate it is the value to be changed. Use the or key to make your time selection.
4. Press NEXT to advance to the setpoint for the TOD period.
5. The setpoint is flashing to indicate it is the value to be changed. Use the or key to make your setpoint
selection.
6. To run the fan continuously during this TOD period, press the FAN key to
change the setting from AUTO to ON.
7. Press NEXT to advance to the next TOD period.
8. Repeat steps 3 through 7 for the remaining TOD periods for that day.
9. Once all TOD periods have been programmed for the first day, repeat steps 3
through 8 for the remaining days.
10. When complete, press DONE to return to the main operating screen.
*MORNING for 4 TOD, DAY for 2 TOD, OCCUPIED for Commercial thermostat setting
Programming Tip: Rather than going through all of the weekdays to modify the Sa or Su programming, you can press PREV
after entering the schedule programming screen to jump to the end of the week and go backward through the schedule
programming.
NOTE:
f the thermostat is configured for 2 TOD periods or the commercial setting is set to ON, there will only be two (2) TOD
periods per day to program.
A Note about
Programmable Fan:
The programmable fan feature will
run the fan continuously during any
time period it is programmed to be
on. This is the best way to keep the
air circulated and to eliminate hot
and cold spots in your building.
