Concord Camera JENOPTIK C 3.1 SL User manual

User’s Guide
User’s Guide
www.concord-camera.com

1
ENGLISH
CONGRATULATIONS
Congratulations on the purchase of your new camera. Your camera has been carefully engineered and
manufactured to give you dependable operation. Read this manual before operating the camera to
become more familiar with it.
This manual has been written and formatted with depth and detail so that you can easily follow the
instructions to maximize the features of your camera.

2
Table of Contents
GETTING STARTED............................................................................................................4
Package Contents............................................................................................................................. 4
System Requirements ...................................................................................................................... 5
Camera Overview.............................................................................................................................. 6
Loading the Batteries ........................................................................................................................ 9
Inserting an SD Card (Optional) ....................................................................................................... 9
Turning the Camera On and Off ..................................................................................................... 10
Setting the Date, Time and Date Stamp ......................................................................................... 10
TAKING PICTURES AND VIDEO CLIPS..........................................................................11
Taking Pictures................................................................................................................................ 11
Taking Pictures in Macro Mode....................................................................................................... 11
Taking Video Clips .......................................................................................................................... 12
Taking Continuous Pictures ............................................................................................................ 12
Taking Pictures with Self-Timer....................................................................................................... 12
Using the Digital Zoom.................................................................................................................... 13
Setting the Flash ............................................................................................................................. 13
Setting White Balance..................................................................................................................... 14
Setting Exposure Compensation .................................................................................................... 14
Setting Size/Resolution................................................................................................................... 15
Customizing Your Camera Settings ................................................................................................ 15
REVIEWING YOUR FILES ................................................................................................18
Viewing Files ................................................................................................................................... 18
Magnifying Pictures......................................................................................................................... 18
Thumbnail View............................................................................................................................... 18
Running Slide Show........................................................................................................................ 19
DELETING STORED FILES..............................................................................................20
Deleting One ................................................................................................................................... 20
Deleting All ...................................................................................................................................... 20
Formatting the Internal Memory or SD Card .................................................................................. 21
PRINTING STORED PICTURES.......................................................................................22
Selecting Pictures for Printing......................................................................................................... 22
Printing Pictures Directly................................................................................................................. 23

3
SOFTWARE INSTALLATION ............................................................................................24
Installing Your Camera Driver ......................................................................................................... 24
Installing the Ulead Photo Explorer 8.0 .......................................................................................... 25
Installing the Ulead Cool 360.......................................................................................................... 29
Installing Adobe Acrobat Reader –For all Windows Users(optional) .............................................. 32
DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER...............34
Preparing to Download Files to Your Computer ............................................................................. 34
Downloading Files to The Computer ..............................................................................................34
USING JENOPTIK C 3.1 SL AS A WEB CAMERA..........................................................36
UNPLUGGING YOUR CAMERA FROM THE COMPUTER .............................................39
CONNECTING THE CAMERA TO TV...............................................................................40
Setting TV Mode ............................................................................................................................. 40
Connecting the Camera to the Television....................................................................................... 40
Using the TV as a Live Viewfinder.................................................................................................. 40
Reviewing pictures and video clips on your TV.............................................................................. 40
TROUBLESHOOTING.......................................................................................................41
SPECIFICATIONS..............................................................................................................43
GETTING HELP.................................................................................................................44
SAFETY TIPS AND MAINTENANCE................................................................................45
REGULATORY INFORMATION.........................................................................................48

4
GETTING STARTED
GETTING STARTED
PACKAGE CONTENTS
Check that all of the items shown below are included with your camera.
• Digital Camera
• Camera Case
• Wrist Strap
• CD-ROM(Includes Camera Driver,
Photo editing software, multi-lingual
User’s Guide etc.)
• TV Cable
• USB Cable
• 2X AAA Batteries
• Quick Start Guide

5
GETTING STARTED
SYSTEM REQUIREMENTS
Windows:
• PC with processor better than MMX Pentium 300 MHz
• Windows XP/2000/ME/98SE
• Minimum 128 MB RAM
• USB port
• CD-ROM driver
• 1024 x 768 monitor, 24-bit color (true color)
Macintosh:
• Mac OS 10 or later
Specifications are subject to change without prior notice.

6
GETTING STARTED
CAMERA OVERVIEW
Camera
The following illustrations show the names of each component, button and switch on the camera.
Front View
Back View
Function Switch
Menu Botton
Enter Botton
Power Lamp
Indicator Lamp
Power Button
LCD Monitor
Right Arrow/Zoom In
Left Arrow/Zoom Out
Up Arrow/Flash
Down Arrow/mode
Flash Viewfinder
Lens
Self-Timer/Red-eye
Reduction Lamp
Mic
Speaker

7
GETTING STARTED
Top View
Bottom View
Side View
Shutter Button
Battery Door
SD Card Slot
Tripod Socket
Macro Switch
USB Port Terminal
TV OUT Terminal
Strap Eyelet

8
GETTING STARTED
LCD indications
Shooting Mode
Review Mode
.
Capture Mode Indicator
White Balance Indicator
EV Value Pictuire Size Macro Indicator
Battery Capacity
Zoom Indicator
Memory Capacity (Remaining
Number of Storable Pictures)
Flash Mode Indicator
Frame Number/Total
Number of Files
File Type Indicator

9
GETTING STARTED
LOADING THE BATTERIES
The camera uses 2x AAA alkaline or rechargeable batteries.
1. Slide the battery door and lift it open.
2. Insert the batteries according to the polarity indication engraved on the
battery contact as shown.
3. Close the battery door.
Checking the Battery Level
The battery level indicates the power of the batteries.
Full (white) Low (red, can not use flash)
When “Low Battery” is shown on the LCD, replace thebatteries with the new ones.
Tips:If you will not use the camera for a long time, remove the batteries.
INSERTING AN SD CARD (OPTIONAL)
The camera is equipped with 16 MB of internal memory that can be used for storage as soon as
you start taking pictures or recording video clips. Besides, the camera can use a Secure Digital (SD)
memory card to store images and/or video clips. If no SD card is inserted in the camera,
all pictures/video clips recorded by the camera will be stored in the internal memory. When SD card is
inserted in the camera, all pictures and video clips recorded by the camera will be stored on the SD
card.
To insert the SD card:
Insert the memory card in the direction as shown in figure, then gently but
firmly push the SD card into the SD card slot as far as possible. When the
card is fully engaged, a click can be heard.
Note:NEVER forcefully push the card into the camera to avoid damaging both the card and/or the
camera.

10
GETTING STARTED
To remove the SD card:
Press the memory card into the slot then release. When the card is partially ejected, pull it out.
Note:If the “Memory Full! ” warning message appears on the LCD, it means the SD card or
internal memory is full. Please remove the memory card and insert a new one or transfer all
images to your computer.
TURNING THE CAMERA ON AND OFF
Press the Power button to turn the camera on. The green Power lamp will light up, the LCD will turn
on automatically.
After one minute of inactivity, the LCD will automatically power off. Then the camera will automatically
power off after being idled for around 3 minutes by default. To power off the camera sooner, press the
Power button.
SETTING TIME AND DATE STAMP
When you first use your camera or when the batteries are removed for an extended time
(approximately 120 minutes), you will need to set the Date and Time . The date and time information
will be displayed on the picture if date stamp is turned on.
1. Slide the Function switch to (Capture mode).
2. Press the MENU button.
3. Press the or button to select Ad (Advance), and
then press the Enter button to enter its sub-menu.
4. Press the or button to select Date Time, and
then press the Enter button.
5. Press the or button to highlight the field to be
changed, and then press the or button to set the
value.
6. Press the or button to highlight Date stamp, then
press the Enter button to turn the function on.
7. When the setting is completed, press the MENU button to return to capture mode.

11
TAKING PICTURES AND VIDEOS CLIPS
TAKING PICTURES
1. Power on the camera.
2. Slide the Function switch to (Capture mode).
Note: In picture taking mode, the icon will be shown on the lower
left side of the LCD. If this icon is not shown, press the button
repeatedly until the icon is shown.
3. Frame your subject with the LCD or viewfinder.
4. Hold the camera still and press the Shutter button to take the picture.
• The and icon will be shown briefly on the LCD after the Shutter button is pressed, which
indicates that the camera is saving the picture. Do not power the camera off or remove the
batteries before the picture is saved.
Note: If Quick View function is turned on(See ‘Customizing Your Camera Settings’), the LCD will
show the image just taken and the options of:
Save: Press the Enter button to save the image.
Delete: Press the button to select “delete” and then press the Enter button to delete the image.
If no action is taken, the picture will be saved in 15 seconds or so.
TAKING PICTURES IN MARCO MODE
This mode enables the camera to take pictures in close distances.
1. Slide the Macro Switch to position. The Macro icon ( ) will be
displayed on the LCD.
2. Frame the subject in the LCD.
• The best shooting range is between 40 cm to 50 cm (15.76 in. – 19.89
inches.)
3. Press the Shutter button to take the picture.
Important: When Macro shooting is not needed, remember to slide the Macro Switch back to
Landscape ( ) mode. Otherwise your pictures taken with shooting range go beyond 50 cm
might be blurry.
TAKING PICTURES AND VIDEOS CLIPS
1
2
3
Macro Switch

12
TAKING PICTURES AND VIDEOS CLIPS
TAKING VIDEO CLIPS
The camera can capture video clips with sound( Sound playback only on
TV&PC).
1. Turn on the camera.
2. Slide the Function switch to (Capture mode).
3. Press the button repeatedly until the Video Mode icon
appears on the LCD.
4. Use the viewfinder or LCD to frame your subject.
5. Press the Shutter button to start recording the video.
• During recording, the recording time is displayed.
6. Press the Shutter button again to stop recording. Otherwise the
camera will keep recording until the memory is full.
Note: The resolution for video clips can be set between VGA (640 x 480) and QVGA (320 x 240).
To set the desired resolution, please see page 15.
TAKING CONTINUOUS PICTURES
The camera can capture 3 consecutive pictures in 1024x768 resolution when the Shutter button is
pressed.
1. Slide the Function switch to (Capture mode).
2. Press the button until the Continuous Shooting icon ( ) is shown on the LCD.
3. Press the Shutter button to take 3 continuous pictures in 1024x768 resolution.
To exit the Continuous Shooting mode, press the button until the ( ) icon disappears from the
LCD.
TAKING PICTURES WITH SELF-TIMER
This function is useful for taking pictures where you want to be included in the photograph.
1. Slide the Function switch to (Capture mode).
2. Press the button until the Self-Timer icon ( ) is shown on the LCD.
3. Press the Shutter button to activate the Self-Timer.
While the self-timer is functioning, the self -timer lamp on the front of the camera will blink. As
the time to take the picture is closer, the lamp blinks faster, normally for 7 seconds, fast for the
following 3 seconds, then the image will be captured.
To deactivate the Self-Timer, press button until the Self-Timer icon ( ) disappears from
the LCD.
1
2
4
3

13
TAKING PICTURES AND VIDEOS CLIPS
USING THE DIGITAL ZOOM
The camera provides up to 4x digital zoom.
In Video mode, when picture size is set to QVGA only 2x digital zoom can
be achieved.
1. Press the to zoom in. The digital zoom bar will be shown on the
LCD.
2. Press the to zoom out or return to the normal mode.
Important:
1. Hold your camera steady when using Digital Zoom to prevent blurred pictures, caused by jittery
movement. It is recommended to either place your camera on a steady surface or mount it on a
tripod.
2. The image quality may degrade slightly with Digital Zoom.
SETTING THE FLASH
By default, the flash is set at OFF mode. When taking pictures at night,
indoor, or outdoor in heavy shadows, you may press the button
to turn the flash on. Press the button repeatedly until the desired
indicator appears on the LCD.
• When pressing the button for the first time, the LCD will be black
for a while due to the flash being charged.
• When the flash is under charging, the orange lamp located next to the
viewfinder will blink. When the flash is ready for taking pictures, the orange lamp will light steadily.
Please wait until the flash stops blinking before proceeding to take pictures.
Flash Mode Flash Fires
A
Auto Flash The camera judges if a flash is required. If the environment is too dark,
the flash will fire.
Fill Flash Flash will fire in any lighting condition.
Red-eye reduction
Use this mode to reduce the occurrence of “red-eyes” when taking
pictures with a flash. The camera will automatically detect when the
flash is needed and the flash will fire after a short delay.
Off In this mode, the flash will not fire, regardless of the lighting condition.
Note: Flash is not available in Video mode , Macro mode and Continuous Shooting mode.

14
TAKING PICTURES AND VIDEOS CLIPS
SETTING WHITE BALANCE
When the white balance is set to match the light source, the camera can take picture more accurately.
1. Slide the Function switch to (Capture mode).
2. Press the MENU button, the LCD will show White Bal (White Balance) in highlight.
3. Press the Enter button to enter its submenu.
4. Press the or button to select the desired white balance mode.
5. Press the MENU or ENTER button to exit.
Auto (Default) The camera sets the white balance automatically according to shooting
conditions.
Daylight Use when shooting outdoors in sunlight on a clear day.
Cloudy Use when shooting outdoors and the sunlight is not enough such as
under cloudy skies, in shade or at dusk.
Tungsten For shooting under tungsten lighting.
Fluorescent For shooting under fluorescent lighting.
SETTING EXPOSURE COMPENSATION
Exposure compensation lets you change the exposure setting EV value manually to suit the lighting
condition of your subject. This feature helps to achieve better result when recording a backlit subject, a
strongly lit subject indoors, or a subject that is against a dark background.
1. Slide the Function switch to (Capture mode).
2. Press the MENU button.
3. Press the or button to highlight EV (Exp Val) and then press ENTER to enter its
submenu.
4. Press the or button to select desired exposure value.
(Note: The ‘•‘ mark represents ‘0.5’)
5. Press the Enter or MENU button to exit.

15
TAKING PICTURES AND VIDEOS CLIPS
SETTING SIZE / RESOLUTION
1. Slide the Function switch to (Capture mode).
2. press the MENU button.
3. Press the or to select PS (Pict Size) and then press the Enter button.
4. Press the or button to select the desired size/resolution.
5. Press the Enter or MENU button to exit.
Size/Resolution options in different modes:
Mode Indicator Size Description
or
L2400 x 1800 Large picture size: produces higher picture resolution and
larger file size.
M2048 x 1536 Standard picture size: produces normal picture resolution
and moderate file size.
S1024 x 768 Small picture size: pictures are of lower resolution and file
size is small.
VGA 640 x 480 Standard Video resolution.
QVGA 320 x 240 Best for e-mail.
(none) 1024 x 768 Not selectable.
Note: The setting remains until you change it.
CUSTOMIZING YOUR CAMERA SETTINGS
Use Advance to customize your camera settings.
1. Slide the Function switch to (Capture mode).
2. Press the MENU button.
3. Press the or button to select Ad (Advance) and then press the Enter button.
4. Press the and to highlight the item you want to adjust, and then press the and to
highlight the desired setting.
5. Press the Enter button to confirm.
6. Press the Menu button to return to shooting status.

16
TAKING PICTURES AND VIDEOS CLIPS
Setup menu and features
Beeper( ):
ON
When Beeper is set on, a beep sound can be heard when the camera
is powered on .
OFF (Default) No beep sound can be heard if Beeper is set at OFF mode.
Auto Power Off( ):
ON
When Auto Power Off is activated, after one minute of inactivity, the
LCD will automatically power off. Then the camera will automatically
power off after being idled for around 3 minutes.
OFF (Default) The camera will not power off automatically in this setting.
Quick Review( ):
ON
When Quick View is set at ON mode, a preview of the picture/video just
taken as well as the options of ‘save’ and ‘delete’ will be shown on the
LCD. This is very convineint for deciding save the picture or not.
OFF (Default) No preview of the picture/video just taken will be shown in this mode.
Self-Timer( ):
10 sec (Default) Setting the timer for a 10 seconds’ delay between the Shutter button is
pressed and the moment when picture is actually taken.
15 sec Setting the timer for a 15 seconds’ delay.
20 sec Setting the timer for a 20 seconds’ delay.
Quality( ):
Super Fine Setting the picture quality to super fine. (Lower compression, bigger file
size)
Fine (Default) Setting the picture quality to fine.
Normal Setting the picture quality to normal. (Smaller file size)
TV( ):
PAL Setting the TV video signal format to PAL.
NTSC (Default) Setting the TV video signal format to NTSC.

17
TAKING PICTURES AND VIDEOS CLIPS
Language( ):
English (Default) Setting the language to English.
Français Setting the language to French.
Deutsch Setting the language to German.
Español Setting the language to Spanish.
Italiano Setting the language to Italian.
Nederlands Setting the language to Dutch.
Português Setting the language to Portuguese.
Flicker( ): While taking pictures or recording video clips under indoor florescent lighting, the
flicker of the light source will decrease the image quality. To overcome this phenomenon, you can
change the light frequency setting to suit the light source.
50Hz (Default) Setting the flicker frequency to 50 Hz.
60Hz Setting the flicker frequency to 60 Hz.
Date Time( ):
YES Setting the Date, Time, and Date Stamp. (p.10 )
Reset( ):
YES Restore the settings of the camera to default setting.
Turning the LCD On or Off:
In Capture mode, the LCD can be turned on or off:
1. Press the ENTER button to turn off the icons on the LCD.
2. Press the ENTER button once more to turn the LCD off.
3. Press the ENTER button a third time to turn the LCD back on.
Note: The LCD cannot be turned off in the Playback mode.

18
REVIEWING YOUR FILES
REVIEWING YOUR FILES
VIEWING FILES
1. Slide the Function switch to (Playback mode). The last picture or video clip will be shown on
the LCD. The file type will be shown on the lower left corner of the LCD:
= Picture, = Video Clip
2. Press the button to skip to the previous file, press the button to skip to the next file.
3. To review video clips, press the Enter button.
• While playing video clips, you may press the Enter button to pause or resume the playing.
• When the whole video clip is played over, it will stop automatically. To stop playing the video clip
sooner and skip to other file, press the or button.
4. While reviewing pictures, you can press the button to enlarge the picture and then press the
button to zoom out or return to the normal.
MAGNIFYING PICTURES
Use the Magnify feature to zoom in a specific area of the selected picture.
1. Slide the Function switch to (Playback mode).
2. Press the or button to select the picture that you want to magnify.
3. Press the MENU button.
4. Press the or button to highlight Zm (Zoom) and then press the Enter button. A light blue
frame will be shown on the LCD.
5. Press the , , or to locate the area to be magnified and then press the Enter
button.
• The selected area will be displayed at 2x magnification.
6. Press , , or to navigate to different parts of the picture.
7. Press the Enter button to exit.
Note: Video clips cannot be enlarged.
THUMBNAIL VIEW
The camera provides index viewing, that is, to view six pictures at a time on the LCD so that you can
search pictures quickly.
1. Slide the Function switch to (Playback mode).
2. Press the MENU button.
3. Press the or button to highlight Vw (View) and then press the Enter button. The LCD

19
REVIEWING YOUR FILES
shows options as below:
Single To display one picture each time.
Thumbnails To display up to six files on the LCD at a time.
Slide Show To play a slide show of all the stored files one by one.
4. Press the or button to select ([Thumbnail]) and then press the Enter button.
• Up to six thumbnail view files appears on the LCD. For video clips, only the first frame can be
seen.
5. Press the or button to select specific picture/video that is shown in the current screen.
• The selected picture or video clip is highlighted in blue.
• If total number of the stored picture/video clips exceeds six, you may press the or
button to display the thumbnail files in the previous or next screen.
6. Press the Enter button to display selected picture or video clip in full screen.
RUNNING SLIDE SHOW
Start the Slide Show features to sequentially display the images on the camera LCD monitor, on a
television screen, or on any external display devices equipped with a video input port.
1. Slide the Function switch to (Playback mode).
2. Press the MENU button.
3. Press the or button to highlight Vw (View) and then press the Enter button.
4. Press the or button to select (Slide Show) and then press the Enter button.
• The slide show will start at once from the first picture or video clips on. Each file will be displayed
once.
Note: Only the first frame of the video clips will be displayed.
5. The slide show will stop automatically when the last file is shown. To stop the slide show sooner,
press the Enter button.