Concord Camera PZ3300 User manual

5S1085-00
3007111B
35mm Fully Automatic Camera
With LCD
Instruction Manual

Thanks for buying this camera. Before using the camera, please read this
instruction manual thoroughly to ensure correct use.
This camera satisfies the requirements of the EU (European Union)
regarding safety, public and consumer protection. This product is in
conformity with the standards of BS EN 61000-6-3:2001: CISPR22: 1998
Class B. BS EN 61000-6-1: 2001:IEC 61000-4-2: 1995, IEC 61000-4-3:1997.
1
Introduction
24
Red-eye reduction
DX setting
Self-timer
Night scene mode
Date Imprinting
Film winding
Film rewinding
Power Source
Dimension
Weight
High light LED
ISO 50 - ISO 3200
10 seconds delay
Yes
Built-in type
Automatic winding
(1) Automatic rewinding
(2) Power mid-roll rewinding
3V CR123 lithium battery x 1 pc
116mm (W) x 66.7mm (H) x 44.2mm (D)
approx. 197g
Specifications and designs are subject to change without notice.
23
Specifications
Type
Film format
Focusing
Focusing range
Lens
Exposure control
Viewfinder
Shutter speed
Flash
135mm 3.3X zoom compact camera with LCD display
24 x 36mm
Active infrared auto focus system
Auto mode: 0.9m~infinity
38mm (F6.3) to 125mm (F12.7) 5 element 5 groups zoom lens
"Step Zoom, 3 retractable barrel sections"
Programmed AE shutter
Real image big zoom finder with AF mark
1/2~ 1/500 second
Four-way Flash (Auto, on/off, red -eye reduction) Recycle
time arround 5 seconds
Flash range W:0.9-3m T:0.9-2m GNO W:11.5 T:15
2
oContents P2
oPrecaution / Care and Storage P3
oNomenclature (Description of parts) P4~8
oOperations:
Attaching the strap / Loading the batteries P9
Power On/Off / Battery check P10
Date / Time adjustment P11
oTaking pictures
©Loading the film P12
©Auto Focus P14
Mode selection---------Auto Flash mode / Flash on / Flash off P16
Landscape / Night scene P17
Red-eye Reduction / Self-timer P18
Remote Control (Optional) P19
©Auto rewinding / Mid-Roll Rewinding P20
©Troubleshooting P21~22
©Specifications P23~24
Contents

3
Precaution / Care and Storage
In order to get the best performance from this sophisticated designed
camera and keep safe-use of it, the following needs to be specially noticed:
1. The camera is not water resistant, and should not be used outdoors if it's raining or
snowing.
2. Protect the camera from dust, moisture, sudden impact, and excessive heat.
3. Don't attempt to disassemble the camera yourself, since there is high-voltage
circuitry inside.
4. Please use a lintless cloth to clean gently in one direction the surface of lens when
cleaning. Do not use chemically treated tissues intended for cleaning eyeglasses.
5. The battery may be shorted when exposed to high temperature, or disposed of in
fire.
6. Remove the battery when the camera is not used in a long time.
7. Keep batteries away from children.
8. Keep the auto-focus windows clean to ensure accurate focusing. If they get dirty,
wipe them clean with soft cloth.
9. Pad the button of the camera with foam-rubber when traveling in a car, ship, or
airplane. Violent vibration could cause damage to the camera.
10.Make sure the tripod screw fits the camera before installing.
5
AF Lamp
Finder eyepiece
Spool
Film Tip top
Tripod bush
Film cartridge
chamber
Back cover
Battery cover
Battery switch
strap eyelet
22
Problem
Self-timer mode does not
work
The picture is blurred
Possible cause
.If the camera is now on the
Date setting mode
.You did not aim the
autofocus spot correctly.
.The lens glass is not clean
.You jiggled the camera
when you pressed the
shutter release button.
.You did not use a tripod
when shooting in the night-
scene mode.
Solution
.cancel the date setting
mode
.Make sure that the
autofocus spot is on your
subjects, or use the
autofocus lock to take the
picture.
.Clean the lens
.Hold the camera still with
both hands and press the
shutter release button
gently.
.use a tripod.
20
Auto film re-wind
Automatic start at end of film, automatically stop upon completion of rewinding. The
power will shut off automatically
1. After the end of the film has been reached, the film will automatically rewind.
2. When the film starts to rewind, the frame counter starts to counter down and "E" will
display on the LCD panel when the film rewinding is completed.
3. Open the back door to unload the film.
Mid-roll rewind
The film may be rewound before the roll of the film is finished. Press the " " button
to mid-roll rewind the film if you don't want to continue taking the remaining film.

Slide the small loop end of the strap
through the strap eyelet (Fig.1) and then
pass the other end thr
ough the loop and
tie the strap onto the strap eyelet (fig.2)
Loading the battery
1.Turn off the power
2.Open the battery chamber cover
3.Insert one CR123 lithium battery with the
correct positive (+) and negative (-) polarity.
Note:
1.Before shooting, please check the battery power at first.
2.Be sure to re-set the date after changing a new battery.
3.When traveling or planning to take many pictures, it is recommended to bring a
spare battery just in case.
7
9
Fig.2
Fig.1
LCD Indicators
Red-eye reduction
Flash indicator
(on/off/charging)
Night scene
Battery check
Landscape
Film counter
Self-timer
Date / Time imprinting
Remote control
(Optional)
Attaching the strap
18
Red-Eye reduction - Built-in, lamp will light for a period 1.0 seconds before the flash.
1. Press mode button until red-eye reduction mark " " shown on LCD panel
2. Shooting with flash mode in dark places, the subject's eyes may appear red in the
picture. This phenomenon is known as "red-eye" and occurs when flash reflects back
from the retina. This mode can contract the pupils of the subject and reduce the
chances of red-eye.
3. As there is a delay effect for the red-eye reduction lamp to function, please press the
button and hold the camera steady until shutter releases.
Self-timer
1. Press the " " button until the " " mark appears on the LCD. This mode allows
you to join the picture you are taking with the camera on a steady support.
2. Press the shutter release button.
3. The self-timer lamp will light up for approx. 7 seconds, then blink for approx. 3
seconds. After that, the shutter will release. It could combine with all kinds of the flash
modes.
4. To press the Power button could cancel the self-timer shooting.
16
Auto Flash - The camera will flash automatically when in a low light.
Flash on mode: Press the Mode button until " " is displayed on the LCD. The flash
will fire whenever taking pictures. In backlit situations, it is recommended to use this
mode.
Flash off mode: Press the Mode button until " " is displayed on the LCD. The flash
will not fire even in a low light. When you don't want to use flash for a more nature
effect or when the use of flash is forbidden in some places.
* It is recommended to use a tripod (tripod socket) or place the camera on another firm
support when taking pictures in dark places.

1. Turn on the power. When you turn the camera on, the lens cover automatically opens.
2. Hold the camera steady with both hands, and be sure not to block the flash, autofocus
window or lens with your fingers.
3. If you want to enlarge the subjects, press the zoom Tele (T) button, and press Wide (W)
button to take wide-angle shots. The lens can be zoomed out and in at six positions
between Tele and Wide freely subject to user's selection.
* Focus range: 0.9m~°¤
4. Look through the finder eyepiece and compose
your subjects within the AF frame mark.
5. Press the shutter release button halfway, and the
AF (green) lamp will light up in the same time,
then fully press it to take a picture.
Note:
When " " on the LCD panel is blinking, which indicates the flash is charging.
After the blinking stops, you can continue taking the next picture.
1. Turn on the power.
2. For date/time adjustment, press "DATE" button until " " is blinking, and then
press the " " button to set the desired date.
3. Repeat (2) step until the "hour", "minute" , "year" and "month" time are set all
correct.
* Calendar year: 2001 to 2031 are stored in memory.
4. After you finish, press "DATE" button to exit the adjustment mode.
5. If the Date imprinting is not desired, press "DATE" button to select "-----" mode.
14
13
Taking pictures
Date and Time Adjustment (YMD/HM)
MODE
25 18:15
MODE
26 18 15
26 18 15
'02 6 26
26 18 15
'02 6 26
MODE
'02 6 26
'02 1 1
'02 6 1
1234
11
1. Aim the subjects through the finder eyepiece.
2. Center the auto-focus frame mark over the main subjects, and then press the release
button halfway down to lock the focus.
3. While still pressing the button halfway down, move the camera until your subjects are
where you want them within the frame.
4. Press the shutter button completely down to take the picture.
Auto Focus (Focus Lock)
25
1.Check through the film cartridge confirmation window to make sure there is no film in
the camera.
2.Slide the back cover opening latch upward to open the back cover.
3.Load the film cartridge and pull the film tip across to the film tip mark.
4.Make sure that the film lies flat and is positioned between the film guides.
5.Close the back cover, and check if the film counter on the LCD panel automatically
advances to the first frame, then "1" displays on the LCD panel.
Note:1.Be sure not to open the film cover after you start taking pictures, or you will ruin
the film.
2.If "1" does not appear on the LCD after loading the film, it means that the film is
not loaded properly. Please reload the film correctly.
12
Loading the film
123
'02 6 26
1
4

17
Mode selection
Six operating modes are available and will appear on the LCD panel in the following
sequence when you press the Mode button.
1. Auto Flash ( No any symbol) 2. Red-eye reduction
3. Flash on 4. Flash off
5. Landscape mode 6. Night scene mode
Flash Distance Range
Depending on the film speed in use, the flash covers the following distances.
ISO Film Speed
ISO100
ISO400
ISO800
ISO1600
Wide - 38mm
0.9m~3.07m
0.9m~6.14m
0.9m~8.7m
0.9m~12.3m
Tele-125mm
0.9m~2.0m
0.9m~4m
0.9m~5.6m
0.9m~8m
* DX setting:
Method: Automatically setting by reading DX code (when using DX film)
Film sensitive setting: ISO 50~ISO 3200
15
Landscape mode: Press the Mode button until the " "mark appears on the LCD.
This is used for taking clear landscape picture or photographing remote scenes through
glass. The flash does not fire in this mode, so the flash off is set automatically.
Note
The mode function will be cancelled automatically after each time shooting.
Night Scene mode: Press the Mode button until the " " mark appears on the LCD.
This mode is effective when taking pictures of people with an evening or nocturnal
background.
A slower shutter speed is set in this mode. The use of a tripod is recommended to prevent
the camera from shaking when Night scene mode is selected.
8
Close-up frame: When taking pictures in the near distance, please focus your subjects
within the frame
AF frame mark: Place the AF frame over the subjects you want to take.
Viewfinder
Close-up frame
Picture Frame
AF (Auto Focus lock) frame mark
10
Power on/off
Press the power button. When power is on, the lens cap will open and LCD is set to
auto mode.
Note:
The power will be turned off automatically after being idle for 7 minutes.
Checking the battery power
The battery power shows on the LCD by the indicator anytime.
1 : Battery in good condition
2 : Replace battery with a new one
3 : The battery has run out. No function can be used except the film rewinding.
* Battery can be replaced if there is a film inside.

21
19
1. Please hold your camera on a steady supports (tripod).
2. Press the " " button to select " " mode, and then aim your subjects through
viewfinder eyepiece to compose in the picture.
3. When the controller signal transmitter is pointed toward the camera and the
transmitter button is pressed, the remote control operation indicator will blink for 2
seconds before shooting.
Remote Control (Optional)
Problem
LCD panel is blank
Film does not advance
Film does not re-wind
The shutter does not release
Troubleshooting
Possible cause
.Battery is weak, expired or
improperly inserted.
.Battery is weak, expired or
improperly inserted.
.Film completely used. There
are no more pictures
remaining.
.Film does not load properly.
.Battery is weak, expired or
improperly inserted.
.The power is turned off.
.The battery has expired
." " is blinking
."E" shown on the LCD
Solution
.Replace or re-load the
battery correctly.
.Replace or re-load the
battery correctly.
.Replace or re-load the film
correctly.
.Re-load the film.
.Replace or re-load the
battery correctly.
.Turn the power on
.Replace the battery
.Please await until the flash
is fully charged.
.Replace the film with a new
one.
4
Nomenclature
Shutter release button
Red-eye reduction
indicator
Self-timer indicator
Back cover switch
Remote control
(Optional)
AF window
Flash
View finder
Lens / Lens cap
6
MODE
AF Lamp
Finder eyepiece
LCD Panel
Mid-roll
rewinding
Zoom (W/T) button
Film confirmation
window
Power button
Date set button
Self-timer /
Remote control
set button
Mode button