CondoMounts CLMDLS1001 User manual

US PATENT NO. US11221102B2
Column Double Layer Shelf
Need Help? Contact our pros:
647-557-5699 [email protected] condomounts.com
Load
20 kgs/44 lbs
Installation Video

01
Please read the installation instruction before starting the installation
Failure to do so may result in personal injury,
property damage or voiding of manufacturer warranty.
Pay attention to the weight limit. Exceeding the limit can
result in impairment, serious injury and property damage.
Never install the mount if parts are missing or damaged.
Do not use this product for any conguration not explicitly
specied in this instruction. We hereby disclaim any and all liability for
injury or damage arising from incorrect assembly, incorrect mounting,
or incorrect use of this product.
Warning
DIMENSIONS
6mm Thickness
1.4” (3.5cm)
2.2” (5.5cm)
3” (8cm)
12”(30cm)
14”(35cm)
6”(15cm)
40 lbs
Max Capacity:
40 lbs (18 Kgs)
WARNING STATEMENTS
PRODUCT PREVIEW

02
PARTS ANS HARDWARE
A
B
x4
Top & Bottom Pads
x1
x2
x1
x4
x4
x1
x2
Front Cover
Glass Shelve
C
D
E
F
G
H
Column Mounting
Bracket
Plastics Washer
Metal Washer

STEP 1 : ATTACH COLUMN MOUNTING BRACKET TO POST/COLUMN
FREE END
OF STRAP
Hold column mounting bracket to the column
where you would like to mount the shelve
03
Ask a second person to wrap the strap
around the column
TWO PEOPLE
STEP 1 : ATTACH COLUMN MOUNTING BRACKET TO POST/COLUMN
TWO PEOPLE
1.1
1.2

Person #2 should insert free end of strap
into the slot of the ratchet buckle
04
STEP 1 : ATTACH COLUMN MOUNTING BRACKET TO POST/COLUMN
STEP 1 : ATTACH COLUMN MOUNTING BRACKET TO POST/COLUMN
1.3
1.4

05
STEP 1 : ATTACH COLUMN MOUNTING BRACKET TO POST/COLUMN
1.5
TO MAKE ADJUSTMENTS AFTER INSTALLATION

06
Attch the lower base (H) to
bracket using screws (A) and
washers (E) and (F), as shown.
Lower cover
H
Note that the plastic
washers (E) and the
lower cover must be
on each side of the
glass to prevent
damage.
E x 2
F x 2
A x 2
D
Install the bracket’s front covers.
2.1
STEP 2 : SHELF INSTALLATION
2.2
STEP 2 : SHELF INSTALLATION

07
A x 2
F x 2
E x 2
D
Top cover
H
Attach the upper base (H) to the bracket in
the same way of the lower one.
Cable Management
STEP 2 : SHELF INSTALLATION
2.3
MANAGE CABLES