Conductrix Wampfler ProfiDAT compact User manual

2

3
Contents
System Description 4
General Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
Functional Principle of the Slotted Waveguide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Benefits of ProfiDAT®compact� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Main Applications� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Main Components 6
Feed-In � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
ProfiDAT®compact Rail� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Mobile Unit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
PE Rail Functionality� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Positioning Functionality � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Scope of Delivery and Interface to the Customers’ Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
Product Data 9
System Overview and Performance 10
Example Arrangement � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Sample Parts List� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Layout-Specific Data Transmission Performance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
System Components – Feed-In Components 12
Feed-In Sets � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
Access Points ProfiDAT®compact � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
System Components – Rail Components 16
ProfiDAT®compact Straight Rails� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Installation Kit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
ProfiDAT®compact Curved Rails � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17
Standard Hanger Clamp � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Customized Hanger Clamps � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
Rail Connectors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
PE Connectors� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
System Components – Mobile Components 20
Mobile Unit � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
Standard Installation Base Plate � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Expansion Unit� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 21
Interfaces – Mechanical Interfaces 22
Mechanical Installation of the ProfiDAT®compact Rail� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Mechanical Installation of Transceivers � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Control Cabinet � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Mechanical Installation of Collectors � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Positioning� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
Interfaces – Electrical and Data Interfaces 23
Power Supply Transceivers � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
PE Connection � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
Data Interfaces � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
Scope of Delivery and Interface to the Customers’ Network � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23
System Layout 24
Spare Parts 26
Spare Collector � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Rail End Cap � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
Services Packages 28
Engineering Consulting for ProfiDAT®compact Systems � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28
Project Service� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28
Installation� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28
Commissioning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 28

4
System Description
General Information
ProfiDAT®compact is a system for the continuous bi-directional data transmission between a local network and moving consumers� The data transmission is based on
WiFi and occurs when the data signal transmits from a stationary antenna to the collector traveling along slotted waveguides�
ProfiDAT®compact system can be installed in parallel to a conductor rail system, acting as a grounding conductor rail, or with an integrated positioning system�
Here, the bar or matrix code band attaches to the ProfiDAT®compact rail, with an optical sensor positioned next to the collector or current collector�
ProfiDAT®compact with 0831 conductor rails and optical reading head
* PE = Protective Earth (Grounding)
• 3-in-1 Solution:
- Data Transmission ➊
- PE Rail* ➋
- Positioning Rail ➌
➊➊
➌➌
➋➋

5
* PE = Protective Earth (Grounding)
System Description
Intralogistics:
• Automated Storage and Retrieval Systems (AS/RS)
• Shuttles
• Transfer cars
• Sorters
• Electrified Monorail Systems (EMS)
Main Applications
• Highly safe and reliable data transmission
- Lowest interference potential with other wireless systems through slotted waveguide technology
• Use of well-known SIEMENS IWLAN transceiver and their iFeatures
- Real-time data transmission through PROFINET/PROFIsafe prioritization
- Parallel transmission of control and video/audio data
- Unlimited system lengths through rapid roaming
- Easy integration into the customer’s network
• Smart and fully integrated solution through unique 3-in-1 functionalities:
- Data transmission
- PE* rail
- Positioning rail
• The most compact slotted waveguide available
- Considerable installation space savings
- Considerable reduction of installation time (only 1 instead of 3 systems need to be installed)
• Compatibility to lifters, transitions, curves, etc.
Benefits of ProfiDAT®compact
A waveguide is a hollow profile with conductive walls that conducts high frequency radio waves� The radio waves are introduced by an antenna at one end and travel
down the length of the waveguide� The geometry of the profile determines which range of radio frequencies can be transmitted with low loss�
By taking into account certain electromagnetic properties, it is possible to introduce a longitudinal slot along one side without leakage of radio waves into or out of the
waveguide� This slot allows a collector to run inside the waveguide, producing a continuous, robust communication channel for a moving vehicle�
Compared to communication in free space, the radio waves do not spread out, which allows a high quality signal to extend over longer distances� Furthermore, the high
isolation of the waveguide means that it can operate in the vicinity of other radio systems on the same frequency without interference issues�
Functional Principle of the Slotted Waveguide
High signal strength
Signal Distribution of ProfiDAT®compact Low signal strength

6(*) Abb: © Siemens AG 2019, Alle Rechte vorbehalten
Main Components
Feed-In
The stationary feed-in set introduces data signals from a local network into the ProfiDAT®compact rail and terminates them at the end of a segment with the help of a
terminating resistor� An access point connected to the feed-in antenna functions as interface between the customer’s network and the ProfiDAT®compact system�
ProfiDAT®compact systems consist of three main components:
• Feed-in sets
• ProfiDAT®compact rails
• Mobile units
Feed-in Set = Feed-in (left) and terminating unit (right) X = see page 27, Rail End Caps
52
500
100
Ø15
49
500
100
Connected to access point Terminating resistor
ProfiDAT®compact Rail
The ProfiDAT®compact aluminum rails guide the WiFi signals and shields them against interference with other wireless systems� In addition, the ProfiDAT®compact rails
can be used as grounding conductor rails� Furthermore, a version of the rail with integrated positioning strip is available� On this strip a bar code or matrix code band can
be attached in order to detect a mobile vehicle’s position with the help of an optical sensor�
ProfiDAT®compact rail without (left) and with positioning strip (right)
ProfiDAT®compact Access Point
Siemens IWLAN (*)

7
Main Components
ProfiDAT®compact Client
Siemens IWLAN (*)
Mobile Unit
The mobile unit includes the ProfiDAT®compact collectors and clients� The antennas pull the signal from the rail and sends them to the connected client mounted on a
mobile vehicle� The antennas also have integrated carbon brushes that connect the mobile vehicle to the ProfiDAT®compact, and thus allowing the rail to act as a ground
(PE)� The clients interface with ProfiDAT®compact’s WiFi system and the customers network on the mobile vehicle�
ProfiDAT®compact collector PE cable
HF cable
Carbon Brush
Antenna
PE* Rail Functionality
For the PE functionality, the ProfiDAT®compact rail must be connected to the customer’s PE cable� The PE connector must be installed next to the feed-in units and the
cable must be marked as PE, meaning it must be colored in yellow and green� Furthermore, its diameter must be able to carry at least half of the phase current� The PE
cable is connected to the PE connector using a nut screw, a washer and a cable lug� The other end of the cable must be connected to the customers’ PE� All grounding
and PE connection points must be marked with a grounding sign�
* PE = Protective Earth (Grounding)

8
Main Components
Positioning Functionality
The ProfiDAT®compact rail with integrated positioning strip offers an additional space to affix a code band with a maximum height of 20 mm onto the slotted waveguide
without the need to install any other components� Thus, the ProfiDAT®compact system saves even more space, as no additional barcode holder is required� With the
addition of an optical reading head, which can be installed next to the current collectors, this code band delivers information about the position of the mobile vehicle(s)�
Both code band and reading head can be sourced from different suppliers (not included in the scope of delivery)� If you need advice on a suitable positioning system we
are pleased to help you find the best solution�
Recommended positioning system suppliers:
• Pepperl+Fuchs
- Reading head: PCV50-F200-B17-V1D
- Matrix code tape: PCV*-CA10-*
• SICK
- Reading head: OLM 100 + 200
- Barcode tape (BCB): Part no� (SICK): 5341378
• Leuze
- Positioning system: BPS 300
- Barcode tape (BCB): Part no� (Leuze): 50106979*
- Positioning system: BPS 8
- Barcode tape (BCB): Part no� (Leuze): 50106980*
* Height, length, start and end readings
must be specified when ordering
Scope of Delivery and Interface to the Customers’ Network
ProfiDAT®compact provides reliable and interference-free Ethernet data transmission� The illustration below describes the scope of delivery of the system (orange) and
the interface to the customers’ network (grey) in terms of the access points and clients connected through RJ45 connectors� It also defines the prerequisites to integrate
a ProfiDAT®compact system into an Ethernet system� Control signals must be transmitted through PROFINET (PROFIsafe) or Ethernet/IP protocols� Data packages
transmitted through ProfiDAT®compact won’t be influenced by the system� All transceivers will be delivered fully configured according to customers’ requirements and
application layout�
Scope of delivery ProfiDAT®compact
max. 20 mm
RJ45
- PoE (RJ45)
- 24 V DC
PE (Grounding)
RJ45
Collector
PROFINET
Controller
PROFINET
Device(s)
PC or
Monitor
Camera(s)
Switch
Power
Supply
Access
Point
Client
Configuration
Configuration
Ethernet
Ethernet
Switch
ProfiDAT®compact – Customized System
Scope of delivery
Ethernet Data Transmission + PE Rail + Positioning Rail
- PoE (RJ45)
- 24 V DC
Power
Supply
PE (Grounding)

9
Product Data
Environmental Conditions Indoor applications (low humidity, non-condensing)
Curves Min� radius vertical: 750 mm, min� radius horizontal: 2�300 mm
Distance between ProfiDAT®compact
rail and conductor rail Beginning from 28 mm (depending on conductor rail system)
Maximum Amperage
ProfiDAT®compact as PE rail
400 A (as PE rail in combination with a conductor rail system
with 400 A max� phase current, at 35°C ambient temperature)
Maximum Amperage
per Collector (PE function) 32 A (Copper graphite); 16 A (Graphite)
Maximum traveling speed
Collector/ Vehicle 600 m/min on straight rails, 40 m/min on transitions/switch points
Maximum height Code Band
(for optical Positioning System) 20 mm
Rated suspension spacing
(ProfiDAT®compact rail only) 1 m for straight rails, 500 mm for curved rails
Rated suspension spacing
(ProfiDAT®compact rail in
combination with conductor rails)
According to conductor rail system or to rated suspension spacing of ProfiDAT®compact rail only (whichever is smaller)
Ethernet Data Rate 100 MBit/s
Frequency 5 GHz, IEEE 802�11
Data Interface Ethernet based (RJ45)
Compatible Communication Protocols
· Ethernet (TCP/IP, UDP)
· PROFINET/PROFIsafe, conformance class A
· Ethernet/IP
Maximum System Length No limitation; max� segment length supplied by one Access Point: 120 m
Maximum number of Clients
per Segment / Access Point 20
Profile Dimensions
Permissible Ambient Temperature Range -20°C to +55°C (other limits to be clarified on request – transceivers can be installed in an air-conditioned control cabinet)
Max. Ambient Temperature Difference 40 K
Standard Profile length: 5 m
21
52
With
positioning
strip
Without
positioning
strip
21
37
Relevant standards
DIN EN 60664-1,
VDE 0110-1:2008-1
Insulation coordination for equipment within low-voltage systems – Part 1: Basic principles, requirements and tests
(IEC 60664-1:2007); German version of EN 60664-1:2007
DIN EN 60204-1,
VDE 0113-1:2019-06
Safety of machines – electrical equipment of machines – Part 1: General requirements
(IEC 60204-1:2016, modified); German version of EN 60204-1:2018
DIN EN 60529,
VDE 0470-1:2014-09
Protection classes provided by housings (IP code) (IEC 60529:1989 + A1:1999 + A2:2013);
German version of EN 60529:1991 + A1:2000 + A2:2013
DIN EN 60204-32,
VDE 0113-32:2009-03
Safety of machines – electrical equipment of machines – Part 32: Requirements for hoisting machines
(IEC 60204-32:2008); German version of EN 60204-32:2008
Radio country approvals The SIEMENS IWLAN transceivers used in our ProfiDAT®compact systems have radio approvals
for all countries we deliver our systems to
Subject to technical changes

10
Arrangement of an exemplary ProfiDAT®compact system with all its components�
Components outside the scope of delivery:
A: Code band
B: Optical reading head
System Overview and Performance
Exemplary Arrangement
Sample Parts List – System length of 100 m with 1 mobile Consumer
Item Part No. Component Description Quantity
10 051551-01 Line feed-in set, rail with positioning strip Length 1 m 1
20 051551-03 End feed-in set, rail with positioning strip Length 2 x 0,5 m, plus rail endcaps 1
30 051552-01 Access point ProfiDAT®compact Customized access point including HF cables and accessories 1
40 051521-02 PE connector Rail connector with PE cable; 32 A, 16 mm², cable length 5 m 3
50 051511-01 ProfiDAT®compact rail with positioning Standard rail length 5 m 20
60 051521-01 Connectors Rail connector 17
70 051541-01 Standard Hanger clamp Hanger clamp for the mechanical installation of the ProfiDAT®compact rail 104
80 051501-01 Mobile unit With 2 collectors, carbon graphite, 32 A, cable length 2 m, including client and
accessories 1
90 051590-01 Installation and spare part kit Rail endcaps, screws, standard Hanger clamps 1
Spare Parts
100 051592-01 Spare collector Carbon graphite, 32 A 2
Service Packages
110 – Installation Mechanical installation & measurement of the ProfiDAT®compact system
(including reporting) 1
120 – Commisioning Commisioning & fine tuning of the ProfiDAT®compact system
(including reporting) 1
Terminating resistor
ProfiDAT®compact
Access Point
Siemens IWLAN (*)
Rail
bracket
50 m
20
10
PE Rail
connector
40
A
70
30
50

11
Exemplary Arrangement
Layout-Specific Data Transmission Performance
Terminating resistor
Collector
antenna
(*) Abb: © Siemens AG 2019, Alle Rechte vorbehalten
ProfiDAT®compact
Client
Siemens IWLAN (*)
50 m
20
100
Rail
connector
60
80
B
Layout Example 1 Layout Example 2 Layout Example 3
Max no� of Consumers per Segment 1) 1 6 20
Communication Cycle Time 32 ms 64 ms 64 ms
No� Retries 3 3 3
Cycle Time x No� Retries 96 ms 192 ms 192 ms
Process Data Yes Yes Yes
Video/Audio Data Yes Yes No
Max� Segment Length 2) 120 m 100 m 100 m
1) Segment = Rail Segment supplied by one access point� All consumers (clients) assume 2 collectors each�
2) All lengths assume line feed-in�

12
System Components
Feed-In Components
Feed-In Sets
End feed-in set = 2 feed-in rails with rail end caps
5249
x
x 100 x100
ø15 ø15
x500 500L
Connected to access point
Terminating resistor
X = see page 27, Rail End Caps
End feed-in set - rail with positioning strip (rail end caps included) – Part No.: 051551-03
End feed-in set - rail without positioning strip (rail end caps included) – Part No.: 051551-04
Feed-in sets introduce data signals from access points into the ProfiDAT®compact rail and terminate them at the end of a segment with stationary antennas integrated
into the rail profile� Therefore one stationary antenna is connected to an access point and the stationary antenna on the opposite side of a segement is connected to a ter-
minating resistor� Access points function as interface between the customer’s network and the ProfiDAT®compact system� Feed-in sets are available for ProfiDAT®compact
systems with or without positioning and for either end or line feed-in� End feed-in sets are additionally equipped with rail end caps�
Terminating resistors will be supplied with the access points�
Set includes:
• 2 feed-in rails (one for each end)
• 2 end caps
• 2 rail connectors

13
System Components
Feed-In Components
Feed-In Sets
Line feed-in set - rail with positioning strip – Part No.: 051551-01
Line feed-in set - rail without positioning strip – Part No.: 051551-02
Please note: each ProfiDAT®compact system with line feed also requires (despite the line feed-in set) an end feed-in set, to terminate the signals at both ends of a
segment� Terminating resistors will be supplied with the access points�
Set includes:
• 2 feed-in rails connected by a rail connector
• 2 rail connectors (on each end)
Line feed-in set = 2 feed-in rails connected with a rail connector.
1000
47
24
200
Ø15
52

14
System Components
Feed-In Components
Access Points ProfiDAT®compact
Background ProfiDAT®compact IWLAN transceivers
The ProfiDAT®compact transceivers (access points or clients) send and receive data via MAC-based data communication in accordance with the IEEE 802�11 standard�
Access points are installed stationary near the feed-in units� They function as an interface between a stationary Ethernet network and the wireless data transmission
through the ProfiDAT®compact profile� Moreover, they coordinate the communication to and between clients (transceivers installed on the mobile vehicles)�
This also means a ProfiDAT®compact system requires at least two transceivers; one access point and one client for the data communication�
An access point can communicate with several clients, while clients can only communicate with one access point within a defined cycle time� Nonetheless clients can
switch from one access point to another, each feeding data into one ProfiDAT®compact rail segment, by following a defined handover process, by using the protocol iPCF
(industrial Point Coordination Function)� With this feature it is possible to achieve unlimited system lengths with ProfiDAT®compact� Additionally, through the prioritization of
PROFINET (PROFIsafe) data, real-time data communication at highest security and reliability can be guaranteed�
All transceivers are configured to customer-specific applications and layouts, as well as for the use together with ProfiDAT®compact� Transceivers not configured by
Conductix-Wampfler will not work in combination with ProfiDAT®compact� Furthermore, configured transceivers are meant for the use within a defined system and seg-
ment only�
For the convenience of our customers and in case a transceiver needs to be replaced, all ProfiDAT®compact transceivers are equipped with a so called C-Plug or Key-Plug
on which the unique configuration is stored� These plugs can be inserted into a compatible replacement device and transfer the configuration automatically to the new
device� In case a plug is lost or damaged, Conductix-Wampfler can deliver a new transceiver correctly configured so long as the serial number of the original device is
known� Delivered transceivers may only be used in combination with the ProfiDAT®compact profile�
Access Points - Config. No.: 051552-01#
Scope of delivery access points:
• Access Point
• Selected HF components
(e�g� HF cables – length 10 m,
Key or C plugs, terminating resistors)
• Customer and layout-specific
configuration of access points
Technical Data ProfiDAT®compact Transceivers (Access Points or Clients)
Measures Height: 156 mm / Depth: 127 mm / Width: 26 mm
Weight 0�52 kg
Mounting Options
S7-300- Mounting rail
S7-1500- Mounting rail
35 mm DIN- Top-hat rail
On wall if mounted flat
Protection Class IP30
Data Connection RJ45, 100 MBit/s
Power Supply - Power-over-Ethernet (RJ45), acc� to IEEE802�3at for type 1 and IEEE802�3af
- 4-pole terminal block with screw connection (24 V)
Type of Voltage / of the Supply Voltage DC
Supply voltage from terminal block
Supply voltage from Power-over-Ethernet
19�2 V - 28�8 V
48 V
Consumed current from terminal block
Consumed current from Power-over-Ethernet
0�25 A
0�125 A
Power loss from terminal block
Power loss from Power-over-Ethernet
6 W
6 W
Radio country approvals The SIEMENS IWLAN transceivers used in our ProfiDAT®compact systems have radio approvals
for all countries we deliver our systems to
ProfiDAT®compact Access Point
Siemens IWLAN (*)
Selected HF Components
(exemplary illustration)
+ + Customer- and
layout-specific
Configuration

15
System Components
Feed-In Components
Polycarbonate Housing suitable for Access Points and Clients
Part No.: 051450-11
• Material: fiber-glass reinforced polycarbonate
• Mounting: Sealing and insulating plugs for wall-mounting screws
• Protection class: IP66
Scope of delivery:
• Plastic housing with pre-drilled holes
• Mounting plate, top-hat rail, end clamps (pre-assembled)
• All necessary cable conduits
• RJ45 plug for fast assembly
254 mm
180 mm
165 mm
Housing for Transceivers (Access Points and Clients)
Ø5
239 mm
165 mm

16
System Components
Rail Components
Straight Rail with Positioning Strip
5 m standard length – Part No.: 051511-01
Custom length – Config. No.: 051511-03#
The ProfiDAT®compact aluminum rails guide the WiFi signals and shields against interference from other wireless systems� In addition, they can be used as grounding
conductor rails� The rails are available in two different options – with and without accommodation for position strips� The option with positioning offers additional space
to attach a code band directly to the slotted waveguide while the rail without positioning offers smaller and symmetric geometry� Besides the standard length of 5 m,
custom lengths can be ordered� When the ProfiDAT®compact rail is used in combination with an optional optical sensor as part of an integrated positioning solution, a
mobile vehicle’s position can be detected�
21
52
ProfiDAT®compact Rail with positioning
Technical specifications – system (rail + rail connector)
Material: Aluminum
DC resistance [Ω/1000 m] 20°C 0�759
DC resistance [Ω/1000 m] 35°C 0�803
Impedance [Ω/1000 m] 20°C/50 Hz 1�009
Impedance [Ω/1000 m] 35°C/50 Hz 1�068
Weight (5 m rail) [kg] 2�94
Straight Rail without Positioning Strip
5 m standard length – Part No.: 051511-02
Custom length – Config. No.: 051511-04#
Technical specifications – system (rail + rail connector)
Material: Aluminum
DC resistance [Ω/1000 m] 20°C 0�795
DC resistance [Ω/1000 m] 35°C 0�842
Impedance [Ω/1000 m] 20°C/50Hz 1�192
Impedance [Ω/1000 m] 35°C/50Hz 1�261
Weight (5 m rail) [kg] 2�62
21
37
ProfiDAT®compact Rail without positioning
max. 20 mm
Installation Kit
Part No.: 051590-01
The installation kit consists of all screws required for the installation of ProfiDAT®compact� This kit is mandatory for the installation of a ProfiDAT®compact segment of max� 120 m
Scope of delivery:
• 10 x Screws for plastic (countersunk) M2,5x6 (for rail endcaps)
• 120 x Self-tapping screws DIN7500 – M3x8 countersunk (for rail connectors and PE connectors)
• 2 x Screws M4x20 (countersunk) incl� washer and nut (for fixing point)

17
Horizontal curves (inclines/declines): r min. 2300 mm
Vertical inside curve: r min. = 750 mm
Vertical outside curve: r min. = 750 mm
System Components
Rail Components
Curved Rails
Curved rail with positioning strip - Config. No.: 051512-01#
Curved rail without positioning strip - Config. No.: 051512-02#
Curved rails are available for either rail option, with or without positioning strip� The rails can be customized according to customer requirements� Limitation are defined by
the insertion direction which is always from the side and the minimal bending radius given in the figures below�
X = direction of travel
Z = current collector’s insertion direction
Z = bending axis
X = direction of travel
Y = bending axis
Z = current collector’s insertion direction
X = direction of travel
Y = bending axis
Z = current collector’s insertion direction
200
r
200
200
200
r
200
200
r
Y
X
Z
Y
X
Z
Z
Y
X
X
Y
Z
X
Y
Z
X
Y
Z
21
R
37
21
R
37
21
R
37

18
System Components
Rail Components
Standard Hanger Clamp
Customized Hanger Clamps
Part No.: 051541-01
Hanger clamps reliably mount the ProfiDAT®compact rail to the given support structures� The standard hanger clamps are only used for the ProfiDAT®compact rail�
• Thickness of mounting surface: 3-6 mm
• Rated suspension spacing (on straight rails): 1 m
• Rated suspension spacing (on curved rails): 0,5 m
Hanger clamps customized to your individual needs can be requested after technical clarification� The following examples provide an overview about different possibilities
and combinations with conductor rail systems�
Thickness of
mounting surface
[mm]
Diameter “X” of bore
for mounting holes
[mm]
3.0 4�6 ± 0�05
4.0 4�7 ± 0�05
5.0 4�8 ± 0�05
6.0 4�9 ± 0�05
Hanger Clamp for ProfiDAT®compact in
combination with 0811 conductor rails (3-pole)
10
6
20
35
17.5
9
28
18.5
øX
ø7
Top
Drilling Pattern
10 ±0.2
Hanger Clamp for ProfiDAT®compact in
combination with 0815 conductor rails (3-pole)
Hanger Clamp for ProfiDAT®compact in
combination with 0831conductor rails (3-pole)

19
System Components
Rail Components
Rail Connector
PE* Connector
Part No.: 051521-01
Rail connectors connect the ProfiDAT®compact rails to each other� They secure data as well as power transmission between the rails�
Please note: Screws are not included! For each segment (= rail segment supplied by one Access Point) one installation unit spare part kit (Part No�: 051590-01, see
page 16) must be ordered, in which all required screws are included�
Scope of delivery PE connector:
• PE connector
• Screw nut
• Washers
Scope of delivery grounding cable:
• PE cable (length: 1 m, 2 m or 5 m)
• 2 cable lugs M8 (installed on both ends)
PE Connector M8 – Part No.: 051521-03
Grounding cable (incl. two cable lugs) – Config No.: 051522-01#
PE connectors are required for the PE rail function of ProfiDAT®compact� They enable an electrical connection between the ProfiDAT®compact rail and the PE� Screw nuts
as well as washers are included with the PE connector� PE cables with cable lugs need to be ordered seperately�
PE connectors are also used to ground the ProfiDAT®compact rail� The rail must be grounded according to the locally applicable regulation and standards, but at least
on both ends of each rail segment with a 16 mm² cable� We recommend installing a PE connector after every 5th rail� PE or grounding cables must suitable for operating
temperatures of at least 90°C and colored in green and yellow�
Please note: Screws are not included! For each segment (= rail segment supplied by one Access Point) one installation unit spare part kit (Part No�: 051590-01, see
page 16) must be ordered, in which all required screws are included�
Rail connector
PE Connector
Connector diameter Grounding cable
diameter
Available
cable lengths
M8
6 mm²
1 m / 2 m / 5 m
16 mm²
50 mm²
95 mm²
22
100
30
50
24
37
22
max.
ø21
54.5
37
30
100
50
25
* PE = Protective Earth (Grounding)

20
System Components
Mobile Components
Mobile Unit
Config. No.: 051501-01#
A ProfiDAT®compact mobile unit includes all components of the system which will be installed on a mobile vehicle�
This includes:
• One or two collectors (each including 600 mm HF and PE cable)
• Clients
• Selected HF components (e�g� HF cables (1�5 m or 3 m), plugs, etc�)
• Customer-specific and layout-specific configuration of clients
The HF cables for the connection between collector and client are available in: 1�5 and 3 m lengths� The PE cable (length 600 mm), which is already installed inside the
antenna arm, is delivered with an open end� The collectors receive the signal from the rail and send them to a transceiver (client) mounted on a mobile vehicle� The system
also has bi-directional data transmission, which means the client is able to transmit as well as receive� Furthermore, the antennas have integrated carbon brushes that
connect the mobile vehicle to the ProfiDAT®compact rail, and thus allowing the rail to act as PE� Clients function as the interface between the ProfiDAT®compact’s WiFi
system and the customers’ network on the mobile vehicle�
Max.
Current
Carbon Brush
Material Cable Diameter
32 A Copper Graphite 2�5 mm²
16 A Graphite 2�5 mm²
ProfiDAT®compact collector
Antenna
Carbon Brush
PE cable
HF cable
± 15 mm
± 15 mm
170
16.5
9
20
4
8
150
77
72
91
28
30
Max. stroke ±15
Max. lateral
deflection ±15
Sliding surface Sliding surface
Connecting cable 2.5 mm²
Max. brush wear: 5 mm /
min. height : 3 mm
Installation base plate
2.8
ProfiDAT®compact
Client Siemens IWLAN (*)
Selected HF Components
(exemplary illustration)
+ + Customer and
layout-specific
Configuration
Table of contents