Fermax WI-BOX User manual

1. Connect the connector into the Wi-BOX
Insert the connector;
+ is red
F1 is white
All manuals and user guides at all-guides.com

2. Terminate the Wi-BOX
Terminate the cabling in the same
portsas the currentwiring
Minimum requirement;
+ (Wi-BOX red) to connector +
L (Wi-BOX yellow) to connector L
– (Wi-BOX brown) to connector –
For video add the following;
V (Wi-BOX blue) to connector V
M (Wi-BOX black) to connector M
Optional;
Ct (Wi-BOX green) to connector Ct
F1 (Wi-BOX white) to connector F
If you arenot feeding the
cabling through the rear
you mayhave to cut out a
bit of the plastic to create a
pathwayfor the cabling
through the front.
If you haven’t turned off
power to the monitor be
careful not to short anyof
the individual cables with
each other as this might
cause the system to fail.
All manuals and user guides at all-guides.com

3. Re-connect the monitor back onto bracket
On power up this LED will
blink slowly in red
All manuals and user guides at all-guides.com

4. Program VDS number into Wi-BOX
b. LED will blink quicklyin red
a. Press button once
c. Press door lock release
button on monitoror handset
within 10secs. The LED will
turn solid green
All manuals and user guides at all-guides.com

5. Add cover to Wi-BOX
QR Code
Location
All manuals and user guides at all-guides.com

6. Pair Wi-BOX to Wi-Fi network (2.4Ghz only)
c. Once pairedto the Wi-Fi
network, the LED will turn
solid blue
b. When required in the app
press and hold button until
LED will blink quickly in red
then release (approx. 5-
10secs)
a. Download the FERMAX Wi-
BOX App from the Play Store
or Apps Store and follow
instructions with app.
QR Code
Location
All manuals and user guides at all-guides.com

7. To turn call divert on
b. LED will turnsolid blue
a. Press button once to turn
on call divert
QR Code
Location
All manuals and user guides at all-guides.com

Troubleshooting LED lights
QR Code
Location
All manuals and user guides at all-guides.com