Connections SW2411A User manual

HDMI DVD PLAYER

1
3. Safety Instructions……………………………………………… 3-4
1. Table of content.......…………………………………………… 1
2. SYMBOLS................…………………………………………… 2
4. Location of Features…………………………...………………… 5
5. Basic Connection………………………………………………… 6
6. Remote Control Buttons…………………………………………. 7-8
7. CD/ DVD Program Menu………………………………………... 9-10
8. Connecting to a TV with HDMI Jack……………………………. 11
9. Connections (USB Drives)………………………………………. 12
10.
Playing a DivX Disc……………………………………………… 13
11.
Troubleshooting Guide………………...………………………… 14
Table of content

2

3
When using any electrical apparatus always observe safety regulations and use
basic safety precautions to reduce the risk of fire, electric shock and personal injury,
including the following
Read, Keep and Follow these instructions, heeding all Warnings.
CAUTION! This is a class 1 laser product. However this player uses a visible laser beam which
could cause hazardous radiation exposure if directed. Be sure to operate the equipment as
directed. Do not place eyes close to any openings when connected to the mains supply.
WARNING! Do not remove any cover.
WARNING! No objects filled with liquid, such as vases, shall be placed on this equipment or in any
position where liquid may fall into this equipment or any other electrical apparatus.
WARNING! Do not insert any objects into any openings of this equipment or any other electrical
apparatus.
WARNING! Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashes and is strictly for indoor use only.
WARNING! Not for use in Tropical humid climates.
WARNING! Do not immerse in any liquid whilst in use or cleaning. Clean only with a damp cloth,
dry with a dry towel. Do not use harsh abrasives as these may damage the plastic parts.
WARNING! DO NOT block any ventilation openings. Keep away from curtains, newspapers and
restricted areas. Install in accordance with any specific manufacturer’s instructions. Always allow a
sufficient gap around the apparatus to avoid overheating.
WARNING! Do not install near any heat sources such as radiators, gas heaters, stoves or other
apparatus (including amplifiers) that produce heat. Do not leave in direct sunlight.
WARNING! Do not place any naked flame source, such as lighted candles on any electrical
apparatus.
WARNING! Connect to a suitable AC 100-240V~50/60Hz power supply only.
WARNING! Keep out of reach of young children. This apparatus is not suitable for use by young
children or infirm persons without supervision. Young children must be supervised to ensure that
they do not play with the apparatus. Ensure young children have enough knowledge to operate the
equipment safely if they do have access to this equipment.
WARNING! Do not abuse or damage a power cord. If any power cord is damaged, it must be
replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a
hazard. A replaceable cord must be replaced with an authorised replacement from an authorised
service agent only.
WARNING! Only use attachments/accessories specified by the manufacturer.
WARNING! Unplug completely from the power source this apparatus during lightening storms or
when unused for long periods of time.
WARNING! Attention is drawn to the environmental aspects of disposing of any battery.
WARNING! Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way, such as when the power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
WARNING! For household use only, this apparatus is not intended for commercial use.
Important Safety Instructions

4
WARNING! If this apparatus is to be used by a third party, please supply these instructions with it.
WARNING! No liability will be accepted for any personal injury or damage caused by failure
to follow these instructions.
This product incorporates copyright protection technology that is protected by U S patent
rights. Use of this copyright protection technology must be authorised by the Macrovision,
and is intended for home and other limited viewing use only unless otherwise authorised by
Macrovision. Reverse engineering or disassembly is prohibited.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works, 1992-1997 Dolby Laboratories. Inc. All rights reserved.
Im
p
ortant Safet
y
Instructions
(
Continued
)

3
NOTE:
1.This is a DVD player with HDMI, the default setting for this DVD player is in HDMI output.
HINT:
1. The Video setting must match on both apparatus, thus both DVD and TV video source setting in HDMI
as recommended by the manufacturer.
2. If change the defaulted Video setting, please make sure to change both in the DVD player and TV in OSD MENU.
3.The image on Video will disturbance if the setting is incorrect.
5

6

7

8
Repeat A-B Press once set point A
Second set point B
VIDEOVIDEO

9
TV Shape ：4：
3LB
TV System : NTSC
Video output : S-Video
HD Resolution : Auto
HD jpeg mode : On
repeatly
TV Shape ：4：
3LB
TV System : NTSC
Video output : S-Video
HD Resolution : Auto
HD jpeg mode : On
Please refer to the Important
Remark on Page3.

10
digital output PCM
Rating

11

12
Port

13

14
VIDEO