MAINTENANCE
•
•
•
•
•
•
•
•
•
•
•
•
•
・
・
・
・
Clean with soap and water cleaners only. Never use solvents on
plastic parts.
Cleanliness of your bike and its operating environment will keep
maintenance problems and service calls to a minimum. For this
reason, ConsiderC recommends that the following preventive
maintenance schedule be followed.
Turn off the bike by unplugging the power cord from the wall outlet.
Wipe down the bike with a damp cloth. Never use solvents, as they
can cause damage to the bike.
Inspect the power cord. If the power cord is damaged, contact
ConsiderC.
Make sure the power cord is not underneath the bike or in any
other area where it can become pinched or cut.
Inspect all assembly bolts and pedals on the machine for proper
tightness.
The safety level of the equipment can be maintained only if it is
examined regularly for damage and wear, e.g. connection parts. If
any deterioration is observed, immediately replace all faulty parts
and do not use until it is repaired.
Clean underneath the bike, following these steps:
Turn off the bike.
Move the bike to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated
underneath the bike.
Return the bike to its previous position.
CLEANING
AFTER EACH USE (DAILY)
EVERY MONTH
WEEKLY