Contec DS-080D Series User manual

Digital Signage Player
AMD T56N 1.65GHz, SSD, POSReady7, DVI-I
DS-080D Series
User’s Manual
CONTEC CO.,LTD.

DS-080D Series User’s Manual i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer.
Product Configuration List
DS-080D-DC6413
Name Pcs.
The main body 1
AC adapter 1
AC cable *1 1
Product guide 1
Warranty Certificate 1
POSReady7 End User License Agreement 1
Setup Manual 1
Serial number label 1
GHOST End User License Agreement 1
Preinstalled OS Recovery Procedures 1
Recovery Media 1
*1 Do not use this AC power cable with any devices except for an attached AC adaptor.
Product Configuration Image
* See the Product Configuration List to check if all the components are included for the specified number of units.

ii DS-080D Series User’s Manual
Copyright
Copyright 2012 CONTEC CO., LTD. ALL RIGHTS RESERVED.
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
AMD and ATI are registered trademarks of AMD Corporation.
MS, Microsoft and Windows are trademarks of Microsoft Corporation.
AMI are registered trademarks of AMI Software International, Inc.
Other brand and product names are trademarks of their respective holder.

DS-080D Series User’s Manual iii
Table of Contents
Check your package.................................................................................................................................i
Copyright.................................................................................................................................................ii
Trademarks..............................................................................................................................................ii
Table of Contents ...................................................................................................................................iii
1. INTRODUCTION 1
About the Product ...................................................................................................................................1
Features.............................................................................................................................................1
Supported OS ...................................................................................................................................1
Customer Support....................................................................................................................................2
Web Site ...........................................................................................................................................2
Limited One-Year Warranty...................................................................................................................2
How to Obtain Service............................................................................................................................2
Liability ...................................................................................................................................................2
Safety Precautions...................................................................................................................................3
Safety Information ...........................................................................................................................3
Caution on the DS-080D Series ......................................................................................................3
2. SYSTEM REFERENCE 5
Specification............................................................................................................................................5
Physical Dimensions...............................................................................................................................6
3. HARDWARE SETUP 7
Before Using the Product for the First Time..........................................................................................7
Hardware Setup.......................................................................................................................................8
Installation Requirements................................................................................................................8
4. EACH COMPONENT FUNCTION 9
Component Name....................................................................................................................................9
Front View........................................................................................................................................9
Component Function.............................................................................................................................10
DC Power Input Connector: DC-IN..............................................................................................10
Display Interface: DVI-I................................................................................................................10
Giga bit-Ethernet: LAN A – B ......................................................................................................11
Serial Port Interface : SERIAL A..................................................................................................11
USB Ports.......................................................................................................................................12
Line out Interface: AUDIO............................................................................................................12

iv DS-080D Series User’s Manual
5. BIOS SETUP 13
Introduction............................................................................................................................................13
Starting Setup.........................................................................................................................................13
Using Setup............................................................................................................................................13
Getting Help....................................................................................................................................13
In Case of Problems........................................................................................................................14
A Final Note About Setup..............................................................................................................14
Main .......................................................................................................................................................15
Advanced ...............................................................................................................................................16
ACPI Settings ........................................................................................................................................17
CPU Configuration.........................................................................................................................18
IDE Configuration..........................................................................................................................19
USB Configuration.........................................................................................................................20
Super IO Configuration.........................................................................................................................21
H/W Monitor..........................................................................................................................................22
Chipset ...................................................................................................................................................23
North Bridge ..........................................................................................................................................24
GFX Configuration................................................................................................................................26
Memory Configuration..........................................................................................................................27
South Bridge ..........................................................................................................................................28
SB SATA Configuration .......................................................................................................................29
SB USB Configuration..........................................................................................................................30
SB GPP Port Configuration...................................................................................................................31
SB HD Azalia Configuration ................................................................................................................32
Boot........................................................................................................................................................33
Security ..................................................................................................................................................34
Save & Exit Settings..............................................................................................................................35
6. APPENDIX 37
Battery....................................................................................................................................................37

1. Introduction
DS-080D Series User’s Manual 1
1. Introduction
About the Product
This is STB for signage, working with AMD G-Series Dual-Core APU (Accelerated Processing Unit)
T56N 1.65GHz.
CPU with enhanced graphics performance helps Full-HD movie to be played smoothly with DVI-I
interface.
SSD can be installed as storage. The body is so compact and supports SATA interface which can
transport data at high speed. It enables you to read high-quality movie, store so big data and transport data
at high bit rate.
DS Series are the products assumed to be used at ordinary environment and market as
"Digital Signage".Operating environment condition, supply period, maintenance period
and other conditions are different from ones of our industrial products (IPC Series,
BOX-PC, PT-Series and others).For details, please consult our retailer.
Features
Integrated processor with CPU and GPU
This product is equipped with AMD G-series Dual-core APU T56N (1.65GHz) that is built-in GPU.
- Discrete GPU-quality graphic processing
This product has APU that is equipped with GPU (Radeon HD6320) that features discrete
GPU-quality.
It supports DirectX 11 and OpenGL 4, and has built-in UVD3 (Unified Video Decoder)
- Fanless and compact design
This fanless design is achieved with energy-saving and compact design.
- Major types of peripherals are supported with rich interfaces
It has a variety of extended interface such as DVI-I, 1000BASE-T x1, USB2.0 x 2, serial (RS-232C).
So it can be used for various purposes.
- Pre-installed Windows Embedded POSReady 7
The OS, Windows Embedded POSReady 7 which is perfect for digital signage use, is pre-installed.
There are many functions on this product. Such as write filters (EWF: Enhanced Write Filter and
FBWF: File-Based Write Filter) and Microsoft Office Viewer that is a file browser for Word, Excel
and PowerPoint.
- Kinect for Windows Runtime (Pre-installed model)
The installed OS is already equipped with a Runtime module which is required on OS side to trip
Kinect for Windows sensor.You can use this product as an application controller which is equipped
with NUI (Natural User Interface ) that features a control with voice or gestures.
Supported OS
- Windows Embedded POSReady7

1. Introduction
2DS-080D Series User’s Manual
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently and
comfortably.
Web Site
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited One-Year Warranty
CONTEC products are warranted by CONTEC CO., LTD. to be free from defects in material and
workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the original
invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office, from
which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original products. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be
liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.

1. Introduction
DS-080D Series User’s Manual 3
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.
DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution on the DS-080D Series
Handling Precautions
DANGER
- This product supports an attached AC adapter and AC cable only.
WARNING
- Always check that the power supply is turned off before connecting or disconnecting power cables
and other cables.
- Users should not attempt to disassemble or modify this equipment, or to replace components. The
manufacturer may not be able to provide service for equipment that has been modified by the user.
- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other
applications that require a very high level of reliability. Do not use the product in such applications.
- If using this product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
- Do not attempt to replace the battery as inappropriate battery replacement poses a risk of explosion.
- For battery replacement, contact your retailer as it must be performed as a process of repair.
- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws
and/or municipal ordinances.

1. Introduction
4DS-080D Series User’s Manual
CAUTION
- Do not use or store this product in a location exposed to high or low temperature that exceeds range
of specification or that is susceptible to rapid temperature changes.
Example: - Exposure to direct sun - In the vicinity of a heat source
- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this
product when it is in concact with water or any other fluid or conductive dust. If this product must be
used in a dusty environment, install it on a dust-proof control panel, for example.
- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such
products will cause this product to malfunction.
- Do not use or store this product in the presence of chemicals.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
- This product’s case may become hot. To avoid being burned, do not touch the case while this product
is in operation or immediately after turning off the power. Avoid installation in a location where
people may come into contact with the case.
- CONTEC does not provide any guarantee for the integrity of data on any recording media such as
SSD.
- Always remove the power cable from the power outlet before changing hardware configurations such
as the connection of connectors, and/or the setting of jumpers and switches.
- To prevent corruption of files, always shutdown the OS before turning off this product.
- CONTEC reserves the right to refuse to service a product modified by the user.
- In the event of failure or abnormality (unusual smells or excessive heat generation), unplug the power
cord immediately and contact your retailer.
- To connect with peripherals, use a grounded, shielded cable.
- When transporting this equipment, be careful to protect it against direct vibration and physical shock.
- You cannot clear the BIOS settings on CMOS of this product. The product must be repaired if it
becomes unbootable after the change of BIOS settings.
- Caution on the VCCI Class A
この装置は、クラスA情報技術装置です。この装置を家庭環境で使用すると電波妨害を
引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されるこ
とがあります。 VCCI-A

2. System Reference
DS-080D Series User’s Manual 5
2. System Reference
Specification
Table 2.1. Functional Specification
Model DS-080D
CPU AMD G-Series Dual-Core APU (Accelerated Processing Unit):
T56N = 1.65GHz @ 18W TDP
Chipset AMD A50M Controller Hub
BIOS Manufactured by AMI
Memory 2GB, DDR3-1333
Graphics Controller AMD Radeon HD6320 Series Built in APU
-DirectX 11
-Direct Compute 11
-Open GL 4.0
-Open CL 1.1
-UVD3 Hardware Video Decoder (MPEG2, MPEG4, H.264, VC-1, WMV9)
Interface
Display 1port (29pin DVI-I connector x1)
Audio Line-out x 1, 3.5 φStereo mini jack,
Serial ATA 1-slot, 2.5inch SATA SSD, 16GB (SLC)
LAN 1port (RJ-45 Connector)
Realtek RTL8111C PCI-E Gigabit LAN Controller
USB 2ports (TYPE-A Connector x 2)
USB 2.0-compliant
RS-232C 1port (RJ-50 Connector)
Power Supply
(AC adapter
specification)
This product supports an attached AC adapter and AC cable only.
Input voltage 100-240VAC, 50-60Hz
Input current 1.5A
Rated output voltage 12VDC
Rated output current 5A(Max.)
Longevity *1 61,000H(temperature 25°C FullHD movie playing)
21,000H(temperature 40°C FullHD movie playing)
Physical dimensions
(mm)
200(W) x 150(D) x 34.8(H) (No protrusions)
Weight About 1.3kg
Operating temperature 0 - 40°C
Storage temperature -10 - 60°C
Humidity 10 - 90%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases None
*1 This product are designed to use under the good condition.

2. System Reference
6DS-080D Series User’s Manual
Physical Dimensions
Figure 2.1. Physical Dimensions

3. Hardware Setup
DS-080D Series User’s Manual 7
3. Hardware Setup
- Before you start, be sure that the power is turned off.
Before Using the Product for the First Time
Follow the next steps to set up this product:
STEP1 By referring to the information in this chapter, install, connect and set this product.
STEP2 Connect cables.
Connect the cable of necessary external devices, such as keyboard and a display, to this
product using appropriate cables.
STEP3 Turn on the power.
Check if STEP1-2 were correctly done, again.
Check that AC plug is not connected, then insert DC jack of AC adapter into the product.
Insert AC plug into AC inlet. The product will wake up.
If you feel any abnormality after connection, pull out AC plug quickly,
and then check if all installation was correctly done.
*.This product supports an attached AC adapter and AC cable only.
STEP4 Set up BIOS.
By referring to Chapter 5, set up BIOS. This setup requires a keyboard and a display.
* Before using this product, be sure to execute " Restore Defauls " to initialize the BIOS
settings to their default values.
(See Chapter 5, "Save & Exit")
CAUTION
Be sure to connect the keyboard and mouse to it before turning the power on for the first time.

3. Hardware Setup
8DS-080D Series User’s Manual
Hardware Setup
- Before you start, be sure that the power is turned off.
Installation Requirements
Table 3.1. Installation Requirements
You can install this product on plastic (LCD monitor), wood, drywall surface over studs, or a solid
concrete or metal plane directly. Ensure the installer uses at least four M3 length 6mm screws to secure
the system on wall. Six M3 length 6mm screws are recommended to secure the system on wall.Fasteners
are not included with the unit, and must be supplied by the installer. The types of fasteners required are
dependent on the type of wall construction.

4. Each Component Function
DS-080D Series User’s Manual 9
4. Each Component Function
Component Name
Front View
Figure 2.1. Component Name
Table 4.1. Component Function
Name Function
DC-IN This product supports an attached AC adapter and AC cable ONLY.
Check that AC plug is not connected, then insert DC jack of AC
adapter into the product.
Insert AC plug into AC inlet. The product will wake up.(Not PowerSW)
DVI Display(29pin DVI-I x1)
LAN Ethernet 1000BASE-T/100BASE-TX/10BASE-T RJ-45 connector
COM Serial port RJ-50 connector
USB USB port connector x2
AUDIO Line out (3.5phone jack)

4. Each Component Function
10 DS-080D Series User’s Manual
Component Function
DC Power Input Connector: DC-IN
This product supports an attached AC adapter and AC cable only.
Display Interface: DVI-I
Connector for DVI-I Interface is provided. Our flat panel displays can be connected. Connector name is
DVI-I (DVI-I 29-pin)
Table 4.2. DVI-I Connector
Connector type DVI-I 29-pin
Pin No. Signal
name Pin No. Signal name Pin No. Signal name
1 DATA2- 13 N.C. C1 RED
2 DATA2+ 14 +5V C2 GREEN
3 DATA2
SHIELD 15 GND C3 BLUE
4 N.C. 16 HPD C4 HSYNC
5 N.C. 17 DATA0- C5 GND
6 DDC CLK 18 DATA0+
7 DDC DATA 19 DATA0
SHIELD
8 VSYNC 20 N.C.
9 DATA1- 21 N.C.
10 DATA1+ 22
DATA0
SHIELD
11 DATA1
SHIELD 23 CLK+
12 N.C. 24 CLK-

4. Each Component Function
DS-080D Series User’s Manual 11
Giga bit-Ethernet: LAN A – B
This product is equipped giga bit.
Table 4.3. Giga bit-Ethernet Connector
Connector type RJ-45
Signal name
Pin No. 100BASE-T 1000BASE-T
1 TX+ TRD+(0)
2 TX- TRD-(0)
3 RX+ TRD+(1)
4 N.C. TRD+(2)
5 N.C. TRD-(2)
6 RX- TRD-(1)
7 N.C. TRD+(3)
8 N.C. TRD-(3)
LEDs for display of network statuses:
Right LED: Link LED
Opertion: Green Blinking
Left LED: Operation LED
10M: Off, 100M: Green, 1000M: Orange
Serial Port Interface: SERIAL A
Connector for Serial Port Interface is provided.
Table 4.4. Serial Port Interface
Connector type RJ-50
Pin No. Signal name
1 DSR Data set ready
2 GND Ground
3 GND Ground
4 TXD Transmit data
5 RXD Receive data
6 DCD Data carrier detect
7 DTR Data terminal ready
8 CTS Clear to send
9 RTS Request to send
10 RI Ring indicator

4. Each Component Function
12 DS-080D Series User’s Manual
USB Ports
This product is equipped USB 2.0 interface.
Table 4.5. USB Connector
Pin No. Signal name
1 USB_VCC
2 USB-
3 USB+
4 USB_GND
Line out Interface: AUDIO
A line output connector is provided. You can plug a headphone or amplifier-integrated speakers into this
connector.
4
3
2
1

5. BIOS Setup
DS-080D Series User’s Manual 13
5. BIOS Setup
Introduction
This chapter discusses AMI’s Setup program built into the product. The Setup program allows users to
modify the basic system configuration.
Starting Setup
The AMI BIOS is immediately activated when you first power on the computer.
By pressing <DEL> immediately after switching the system on, or
If the message disappears before you respond and you still wish to enter Setup, restart the system to try
again by turning it OFF then ON. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys.
Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the +and -keys to
change entries, press <F1> for help and press <Esc> to quit. The following table provides more detail
about how to navigate in the Setup program using the keyboard.
Table 5.1. Using Setup
Key Function
Up Arrow Move to the previous item
Down Arrow Move to the next item
Left Arrow Move to the item on the left
Right Arrow Move to the item on the right
Enter Move to the item you desired
+ Increase the numeric value or make changes
- Decrease the numeric value or make changes
F1 key General help on Setup navigation keys
F2 key Load previous values from CMOS
F3 key Load the optimized defaults
F4 key Save all the CMOS changes and exit
Esc Main Menu : Quit without saving changes
Submenus : Exit Current page to the next higher level menu
Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press <Enter> key.

5. BIOS Setup
14 DS-080D Series User’s Manual
In Case of Problems
If, after making and saving system changes with Setup, you discover that your computer no longer is able
to boot, we should repair it
The best advice is to only alter settings which you thoroughly understand. To this end, we strongly
recommend that you avoid making any changes to the CPU defaults and the chipset defaults. These
defaults have been carefully chosen by both Insyde and your systems manufacturer to provide the
absolute maximum performance and reliability. Even a seemingly small change to them has the potential
for causing you to be repaired.
A Final Note About Setup
The information in this chapter is subject to change without notice.

5. BIOS Setup
DS-080D Series User’s Manual 15
Main
This setup allows you to record some basic hardware configurations in your computer system and set the
system clock.
Table 5.2. Main
Aptio Setup Utility - Copyright © 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
BIOS Information
Memory Information
Total Memory 2032 MB(DDR3)
System Language [English]
System Date [Mon 00/00/2012]
System Time [00:00:00]
Access Level Administrator
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Item Explanation
System Language Choose the system defaults language.(English ONLY)
System Date Set the Date. Use Tab to switch between Data elements.
System Time Set the Time. Use Tab to switch between Time elements.