Contec PCI-bus Analog Input Multi-Function Board... User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

PC-HELPER
Analog Input Board for PCI
AD12-16(PCI)E
AD12-16U(PCI)E
AD16-16(PCI)E
User’s Guide
CONTEC CO.,LTD.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing
items, contact your retailer.
Product Configuration List
- Board (One of the following) …1
[AD12-16(PCI)E, AD12-16U(PCI)E or AD16-16(PCI)E] …1
- User’s Guide (this booklet) …1
- CD-ROM [API-PAC(W32)] …1
Board CD-ROM
[API-PAC(W32)]
User’s Guide
User’s Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ii AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Copyright
Copyright 1997 CONTEC CO., LTD. ALL RIGHTS RESERVED
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document. The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
MS, Microsoft, Windows and Windows NT are trademarks of Microsoft Corporation. Other brand and
product names are trademarks of their respective holder.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E iii
Table of Contents
Check Your Package................................................................................................................................i
Copyright.................................................................................................................................................ii
Trademarks..............................................................................................................................................ii
Table of Contents ...................................................................................................................................iii
1. BEFORE USING THE PRODUCT 1
About the Board ......................................................................................................................................1
Features.............................................................................................................................................1
Support Software..............................................................................................................................2
Cable & Connector (Option) ........................................................................................................3
Accessories (Option).....................................................................................................................3
Customer Support....................................................................................................................................4
Web Site ...........................................................................................................................................4
Limited Three-Years Warranty...............................................................................................................4
How to Obtain Service............................................................................................................................4
Liability ...................................................................................................................................................4
Safety Precautions...................................................................................................................................5
Safety Information ...........................................................................................................................5
Handling Precautions.......................................................................................................................6
Environment.....................................................................................................................................7
Inspection .........................................................................................................................................7
Storage..............................................................................................................................................7
Disposal............................................................................................................................................7
2. SETUP 9
What is Setup?.........................................................................................................................................9
Using the Board under Windows Using the Driver Library API-PAC(W32)...............................9
Using the Board under Windows Using Software Other than the Driver Library
API-PAC(W32)................................................................................................................................9
Using the Board under an OS Other than Windows.....................................................................10
Step 1 Installing the Software...............................................................................................................11
About the driver to be used............................................................................................................11
Starting the Install Program...........................................................................................................12
Select API-AIO(WDM).................................................................................................................13
Select API-AIO(98/PC) .................................................................................................................14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

iv AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Step 2 Setting the Hardware..................................................................................................................16
Parts of the Board and Factory Defaults........................................................................................16
Setting the Board ID.......................................................................................................................19
Setting the interrupt signal resource ..............................................................................................19
Setting the Analog Input ................................................................................................................20
Setting the Analog Output..............................................................................................................22
Setting the Counter Control and Digital I/O Signals ....................................................................23
Plugging the Board.........................................................................................................................24
Step 3 Installing the Hardware..............................................................................................................25
Turning on the PC ..........................................................................................................................25
When Using API-AIO(WDM).......................................................................................................25
When Using API-AIO(98/PC).......................................................................................................27
Step 4 Initializing the Software.............................................................................................................30
When Using API-AIO(WDM).......................................................................................................30
When Using API-AIO(98/PC).......................................................................................................32
Step 5 Checking Operations with the Diagnosis Program...................................................................33
What is the Diagnosis Program?....................................................................................................33
Check Method.................................................................................................................................33
Using the Diagnosis Program for Use of API-AIO(WDM) .........................................................34
Using the Diagnosis Program for Use of API-AIO(98/PC)..........................................................38
Setup Troubleshooting...........................................................................................................................41
Symptoms and Actions...................................................................................................................41
If your problem cannot be resolved...............................................................................................41
3. EXTERNAL CONNECTION 43
Using the On-board Connectors............................................................................................................43
Connecting a Device to a Connector .............................................................................................43
Connector Pin Assignment.............................................................................................................45
Analog Input Signal Connection...........................................................................................................47
Single-ended Input..........................................................................................................................47
Differential Input............................................................................................................................48
Analog Output Signal Connection........................................................................................................49
Digital I/O signals and Control signals Connection.............................................................................50
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E v
4. FUNCTIONS 51
Analog Input Function ..........................................................................................................................51
1. Setting the Conversion Conditions............................................................................................52
2. Starting/Stopping Operation......................................................................................................57
3. Monitoring the Status and Acquiring Data ...............................................................................58
4. Reset ...........................................................................................................................................61
5. Extended function......................................................................................................................61
Analog Output Function........................................................................................................................62
Digital Input Function...........................................................................................................................64
Digital Output Function ........................................................................................................................65
5. ABOUT SOFTWARE 67
When using the API-AIO(WDM).........................................................................................................68
Accessing the Help File.................................................................................................................68
Using Sample Programs.................................................................................................................69
Using Utility Programs ..................................................................................................................71
When using the API-AIO(98/PC).........................................................................................................76
Accessing the Help File.................................................................................................................76
Using Sample Programs.................................................................................................................77
Using the Utility Program..............................................................................................................79
Uninstalling the Driver Libraries..........................................................................................................81
CD-ROM Directory Structure ..............................................................................................................82
6. ABOUT HARDWARE 83
Hardware specification .........................................................................................................................83
Block Diagram.......................................................................................................................................87
Timing of Sampling Control Signals....................................................................................................88
About Calibration..................................................................................................................................89
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

vi AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 1
1. Before Using the Product
About the Board
AD12-16(PCI)E, AD12-16U(PCI)E and AD16-16(PCI)E are PCI-compliant interface boards that
convert analog input signals to digital equivalents (performing analog-to-digital conversion).
< AD12-16(PCI)E > is the general-purpose type that can perform A-D conversion at a conversion speed
of 10µsec per channel and a resolution of 12-bit.
< AD12-16U(PCI)E > is the high-speed type that can perform A-D conversion at a conversion speed of
1µsec per channel and a resolution of 12-bit.
< AD16-16(PCI)E > is the high-precision type that can perform A-D conversion at a conversion speed
of 10µsec per channel and a resolution of 16-bit.
Using the bundled driver library [API-PAC(W32)], you can create Windows application software for
this board in your favorite programming language supporting Win32 API functions, such as Visual
Basic or Visual C/C++.
Features
Sixteen single-ended channels and eight differential channels (Analog input function)
Either board allows the single-ended or differential input mode to be selected with on-board jumpers.
The order of channels subject to signal conversion can be preset in the dedicated register. Using an
optional unit, the board can increase the maximum number of input channels (up to 32 channels) and
perform simultaneous sampling.
On-board buffer memory (Analog input function)
The board has buffer memory available as a FIFO or ring buffer to hold 256 kilobytes of data. This
enables sampling to be executed in the background independently of the processing power of the PC.
Assorted sampling control functions (Analog input function)
The board can control the starting and stopping of sampling not only with software commands but also
by detecting analog signal strength or TTL-level signals. The board offers a choice of sampling clocks
selectable to determine the sampling speed: the internal sampling clock using the on-board clock
generator and the external sampling clock using the digital signal input from an external device.
Analog output function
The board has one channel of analog output function.
Digital input/output function
The board has four digital input and four digital output pins for TTL-level signals, allowing an external
device to be monitored and controlled.
Abundant optional units
Optional units are available for enhancements.
Using optional units enhances board functions and facilitates connections.
For more details on the option, please refer to this chapter “Cable & Connector” or
“Accessories (Option)”.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
2AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Support Software
You should use CONTEC support software according to your purpose and development environment.
Driver Library API-PAC(W32) (Bundled)
API-PAC(W32) is the library software that provides the commands for CONTEC hardware products in the form of
Windows standard Win32 API functions (DLL). It makes it easy to create high-speed application software taking
advantage of the CONTEC hardware using various programming languages that support Win32 API functions, such as
Visual Basic and Visual C/C++.
It can also be used by the installed diagnosis program to check hardware operations.
CONTEC provides download services to supply the updated drivers and differential files.
For details, read Help on the bundled CD-ROM or visit the CONTEC’s Web site.
< Operating environment >
OS Windows XP, 2000, NT, Me, 98, etc..
Adaptation language Visual C/C++, Visual Basic, Delphi, Builder, etc..
Others Each piece of library software requires 50 megabytes of free hard disk space.
Linux version of analog I/O driver API-AIO(LNX) (Supplied: Stored on the API-PAC(W32)
CD-ROM)
This driver is used to control CONTEC analog I/O boards (PC Cards) from within Linux.
You can control CONTEC I/O boards easily using the shared library used by gcc and Kylix, the device driver (module)
for each kernel version, and the board (PC Card) configuration program (config).
CONTEC provides download services to supply the updated drivers and differential files.
For details, read Help on the bundled CD-ROM or visit the CONTEC’s Web site.
< Operating environment >
OS RedHatLinux, TurboLinux, etc..
(For details on supported distributions, refer to Help available after installation.)
Adaptation language gcc, Kylix, etc..
Others Requires 3 megabytes of free hard disk space.
Base package of ActiveX components for measurement system development
ACX-PAC(W32)BP (Option)
This is a set of useful Windows development tools for measurement systems and consists of a software component
library with ready-to-use samples which you can combine for easy programming.
The package contains components for controlling CONTEC I/O boards (PC Cards). Features include interface
control for analog I/O, digital I/O, GPIB communications, and counter inputs, as well as X-Y plotting and file storage
support.
Check the CONTEC’s Web site for more information on this soft.
Advanced package of ActiveX components for measurement system development
ACX-PAC(W32)AP (Option)
Complements the ACX-PAC(W32)BP functions with additional components including graphics (plotting, switches,
and lamps, etc.) and mathematical and analysis tools.
Check the CONTEC’s Web site for more information on this soft.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 3
Cable & Connector (Option)
Flat Cable with One 37-pin D-Type Connector : PCA37P-1.5 (1.5m)
Shielded Cable with One 37-pin D-Type Connector : PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
Shielded Cable with Two 37-pin D-Type Connectors : PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
Flat Cable with One 15-pin D-Type Connector : PCA15P-1.5 (1.5m)
Flat Cable with Two 15-pin D-Type Connectors : PCB15P-1.5 (1.5m)*1
Coaxial Cable for Single-ended Inputs (16 channels) : PCC16PS-1.5 (1.5m)
: PCC16PS-3 (3m)
2 Wires Shielded Cable for Differential Inputs (8 channels) : PCD8PS-1.5 (1.5m)
: PCD8PS-3 (3m)
Flat Cable with 1 Sided 16-Pin Header Connector (1.5m) : DT/E1
Conversion Cable (16Pin to 15Pin) with Bracket : DT/E2
*1 For FTP-15 only
Accessories (Option)
Termination panel with Screw Terminals for Spade Lugs : DTP-3(PC)
Termination panel with Screw Terminals : DTP-4(PC)
Termination panel with BNC connectors for Analog Multi-function Boards : ATP-16 *2
Termination panel for Digital I/O on Analog Multi-function Boards : FTP-15 *3
Screw Terminal : EPD-37A *2
Screw Terminal : EPD-37 *2
16 Channel Simultaneous Sample & Hold Accessory : ATSS-16 *2
8ch-Isolation Accessory Board for Analog Inputs : ATII-8A *2
Low pass filter expansion board : ATLF-8 *2
16CH Multiplexer Sub-Board : ATCH-16(PCI)
<When using
the AD12-16(PCI)E,
AD16-16(PCI)E>
16CH Multiplexer Sub-Board : ATUH-16(PCI)
<When using
the AD12-16U(PCI)E>
*2 A PCB37PS -*P optional cable is required separately. (0.5m is recommended.)
*3 A DT/E2 and PCB15P-1.5 optional cable is required separately.
* Check the CONTEC’s Web site for more information on these options.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
4AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently
and comfortably.
Web Site
Japanese http://www.contec.co.jp/
English http://www.contec.com/
Chinese http://www.contec.com.cn/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
Limited Three-Years Warranty
CONTEC Interface products are warranted by CONTEC CO., LTD. to be free from defects in material
and workmanship for up to three years from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the
original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office,
from which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original products. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor
be liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 5
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these
labels to operate the equipment safely.
DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
6AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
- There are switches and jumpers on the board that need to be set in advance.
Be sure to check these before installing to the expansion slot.
- Only set the switches and jumpers on the board to the specified settings.
Otherwise, the board may malfunction, overheat, or cause a failure.
- Do not strike or bend the board.
Otherwise, the board may malfunction, overheat, cause a failure or breakage.
- Do not touch the board's metal plated terminals (edge connector) with your hands.
Otherwise, the board may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
- Do not install or remove the board to or from the expansion slot while the computer's power or
expansion unit is turned on.
Otherwise, the board may malfunction, overheat, or cause a failure.
Be sure that the personal computer power is turned off.
- Make sure that your PC or expansion unit can supply ample power to all the boards installed.
Insufficiently energized boards could malfunction, overheat, or cause a failure.
- The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using the product continuously, be sure to read the user’s guide and understand the
contents.
- Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 7
Environment
Use this product in the following environment. If used in an unauthorized environment, the board may
overheat, malfunction, or cause a failure.
Operating temperature
0 to 50°C
Operating humidity
10 to 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Not to be excessive
Inspection
Inspect the product periodically as follows to use it safely.
- The gold-plated leads of the bus connector
have no stain or corrosion.
- Check that the board has
no dust or foreign matter adhering.
- Check that the bus connector
of the board and its cable have
been plugged correctly.
Storage
When storing this product, keep it in its original packing form.
(1) Put the board in the storage bag.
(2) Wrap it in the packing material, then put it in the box.
(3) Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1. Before Using the Product
8AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2. Setup
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 9
2. Setup
This chapter explains how to set up the board.
What is Setup?
Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware.
The setup procedure varies with the OS and software used.
Using the Board under Windows
Using the Driver Library API-PAC(W32)
This section describes the setup procedure to be performed before you can start developing application
programs for the board using the bundled CD-ROM “Driver Library API-PAC(W32)”.
Taking the following steps sets up the software and hardware. You can use the diagnosis program later
to check whether the software and hardware function normally.
Step 1 Installing the Software
Step 2 Setting the Hardware
Step 3 Installing the Hardware
Step 4 Initializing the Software
Step 5 Checking Operations with the Diagnosis Program
If Setup fails to be performed normally, see the “Setup Troubleshooting” section at the end of this
chapter.
Using the Board under Windows
Using Software Other than the Driver Library
API-PAC(W32)
For setting up software other than API-PAC(W32), refer to the user’s guide for that software. See also
the following parts of this user’s guide as required.
This chapter Step 2 Setting the Hardware
This chapter Step 3 Installing the Hardware
Chapter 3 External Connection
Chapter 6 About Hardware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2. Setup
10 AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Using the Board under an OS Other than Windows
For using the board under an OS other than Windows, see the following parts of this user’s guide.
This chapter Step 2 Setting the Hardware
Chapter 3 External Connection
Chapter 6 About Hardware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2. Setup
AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E 11
Step 1 Installing the Software
This section describes how to install the Driver libraries.
Before installing the hardware on your PC, install the Driver libraries from the bundled
API-PAC(W32) CD-ROM.
The following description assumes the operating system as Windows Me. Although some user
interfaces are different depending on the OS used, the basic procedure is the same.
About the driver to be used
Two analog I/O drivers are available: API-AIO(WDM) and API-AIO(98/PC)W95/NT.
API-AIO(WDM) is a new driver to perform analog input/output under Windows.
API-AIO(WDM) was developed to improve the conventional product version of API-AIO(98/PC) in the
ease of use and functionality.
It is advisable to use API-AIO(WDM) for you to use an analog I/O device. API-AIO(WDM) will
support new OSs and devices in the future but will not support Windows NT 4.0, Windows 95, ISA bus,
or C-bus.
Use API-AIO(98/PC) if your operating environment contains such an unsupported piece of software or
hardware.
Check the following selection guide to easily select the driver to be used.
OS to be used
Device type
PCI bus, PC Card
Usable language
API-AIO(WDM)
VC4, VC2, VB4
API-AIO(98/PC)W95, NT
Yes
No
ISA bus, C(98)bus
Windows 95/Windows NT4.0
Windows XP/Windows 2000
Windows Me/98
VC6.5, VB6.5, Delphi,
C++Builder
Is the first use of the analog board?
Is the upgrade of existing system
using API-AIO(98/PC)W95/NT?
No (Already in use)
Yes
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

2. Setup
12 AD12-16(PCI)E, AD12-16U(PCI)E, AD16-16(PCI)E
Starting the Install Program
(1) Load the CD-ROM [API-PAC(W32)] on your PC.
(2) The API-PAC(W32) Installer window appears automatically.
If the panel does not appear, run (CD-ROM drive letter):\AUTORUN.exe.
(3) Click on the [Install the drivers] button.
CAUTION
Before installing the software in Windows XP, 2000, or NT, log in as a user with administrator
privileges.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com