Continental Refrigerator MC3-DCW User manual

COLD WALL
MILK COOLERS
REFRIGERTORS
Utilizing Environmentally Safe, CFC-free R-404A Refrigerant
Standard Features
•Modern, State-Of-The-Art Styling
•Available in both Single (S) and Double (D) Service
Access
•Cold Wall, Performance Rated, R-404A Refrigeration
•System Designed to Keep Milk Cold Prior to Serving
•Cabinet Construction Consisting Of Stainless Steel Top,
Lid and Door, White Finish Steel Body and Galvanized
Steel Interior with Reinforced Stainless Steel Floor
•Non-Corrosive, Heavy Duty, Epoxy Coated Steel Wire
Floor Racks
•Heavy Duty, Stainless Steel Lid and Door Hinges and
Latches
•2" High Density, Non-CFC Polyurethane Foamed-In-
Place Insulation
•Easily Serviceable Rear Mounted Compressor
•Exterior Mounted, Easily Readable Dial Thermometer
•Snap-In Lid And Door Gasket
•Door Cylinder Security Lock
•Swivel Type, Heavy-Duty Casters (Front Locking)
•Easily Accessible, Convenient Cleanout Floor Drain
•Extra Long, 10' Power Supply Cord And Plug Attached
Models Available
•MC3-SCW •MC3-DCW
•MC4-SCW •MC4-DCW
•MC5-SCW •MC5-DCW
Optional Features & Accessories
•Stainless Steel Exterior •Stainless Steel Interior
•Wrap Around Bumpers •Corner Bumpers
•6" Adjustable Legs
MC5-SCW
REFRIGERATION SYSTEM
The self-contained refrigeration system is con-
cealed within an easily serviceable rear mounted,
slide out chassis. A bottom mounted full-length rear
grill allows for even air circulation to condensing
unit. The "performance rated", hermetically sealed,
capillary type cold wall refrigeration system is
designed to keep milk cold prior to serving. A strict
quality assurance team inspects all materials and
components to certify that each model conforms to
the most exacting standards. All models are per-
formance tested for a minimum of 16 hours prior to
crating
CABINET CONSTRUCTION
All materials are of top quality, and are assembled
under rigid supervision conforming to strict quality
assurance requirements. Case is of all metal welded
construction and is internally supported and braced for
rigid unit construction. All cabinet joints and seams
are vapor-tight sealed.
INSULATION
All cabinet walls, top, bottom, lids and doors have an
average of 2" of high density, non-CFC, polyurethane
foamed in place insulation
DOOR & LID CONSTRUCTION
Doors and lids are constructed of a heavy gauge
stainless steel and are internally braced and ure-
thane foam insulated for rigidity. Doors, lid hinges,
and latches are heavy duty and constructed of stain-
less steel. All gaskets are self-adjusting and snap-
in type, creating a positive seal. Doors are provid-
ed with built in cylinder security locks.

MCCW305
REFRIGERATORS
A Division of National Refrigeration & A/C Products, Inc.
539 Dunksferry Road Bensalem, PA 19020
[phone] Fax: [phone]
www.continentalrefrigerator.com
SPECIFICATIONS MC3-SCW MC3-DCW MC4-SCW MC4-DCW MC5-SCW MC5-DCW
DIMENSIONAL DATA
Net Capacity (cu.ft.) 13 13 20 20 24 24
Crate Capacity (13" x13" x11") 8 8 12 12 16 16
Crate Capacity (19" x13" x11") 4 4 8 8 10 10
Width, Overall (in.) 34 34 49 49 58 58
Depth (in.) 33 33 33 33 33 33
Height, Overall (in.) 411/2411/2411/2411/2411/2411/2
Service Access Single Double Single Double Single Double
Condensing Unit Size (HP) 1/41/41/31/31/31/3
Refrigerant R-404A R-404A R-404A R-404A R-404A R-404A
Cabinet Electrical 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Power Cord Supply yes yes yes yes yes yes
MC3-CW MC4-CW MC5-CW
MC-SCW MC-DCW