Contixo DR2 User manual

RC Triceratops DR2
User Manual
PLEASE READ THIS MANUAL BEFORE USING.
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
*product colors may vary

Click the button on the Triceratops, and the Triceratops will automatically demonstrate the
function.
DR2 Remote Control
Demo button
Move
Forward
Move
Backward

DR2 RC Triceratops Setup
Remote Battery Installation
1. Use a screwdriver to remove the battery cover.
3. Replace the battery cover and screw back into place.
The dinosaur has been installed batteries, please remove the insulating tape from the
batteries before use.
2. Place two AA’s with the corresponding polarities as labeled on the unit.
Battery Warnings
1. Insert batteries with correct polarity.
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
4. Rechargeable batteries are to be removed from the drone before being charged.
5. Rechargeable batteries are only to be charged under adult supervision.
6. Exhausted batteries are to be removed from the drone.
7. The supply terminals are not to be short-circuited.
8. In order to avoid battery leakage causing damage to the remote controler, please take out the
battery if not in use for a long time.

CONTACT INFORMATION
E-Mail: support@con�xo.com
Website: www.con�xo.com
©2021 Con�xo Inc. All rights reserved. Con�xo®, the Con�xo logo and
associated characters, trademarks and design elements are owned and
licensed by Con�xo Company.