Converters.TV 833 User manual

15 Inch CGA EGA VGA
to XGA LCD Wide Viewing Angle
Panel ID# 833
Ope ation Manual

Int oduction
This monitor is an open frame LCD Panel monitor. It features the VESA
plug & play system which allows the monitor to automatically a just itself
to the match the frequency of the user's evice. It now has wi e viewing
angle capability. This allows for better image isplay when viewing screen
from the si es or top or bottom
Featu es
•Wi e viewing angle
•High brightness.
•Fast response time.
•Power saver.
•Low electromagnetic wave an power saver.
•Safety certifications.
Powe Save
•The power control system is installe insi e the LCD monitor.
•If the monitor has not been use for a certain perio of time, the
system will turn the monitor to low voltage mo e to save power. Any
button press will return the monitor to original state.
•Your input evice e.g. your computer controls the power saver mo e.
You can a just these settings via your computer
•The LCD monitor is compatible with EPA Energy Star an N Tek if
use with a VESA DPMS computer.
•To save power, turn off the power of the LCD monitor when it is not
in use.
Plug and Play
•The VESA plug an play function eliminates the complicate an
time-consuming installation process.
•As this is a plug an play monitor. Your computer system can easily
i entify an automatically a just the monitor.
•The LCD monitor uses Display Data Channel (DDC) to sen Exten e
Display I entification Data (EDID) to the computer system, so the
computer system can be set to monitor auto a just.

Setting up you
LCD monito
Sc een Adjustment
To enter a just mo e, please refer to the OSD control.
•Turn the computer an LCD monitor on.
•Press “Auto” button to start auto a just.
•This will start the auto a just process. This will take approximately 10
secon s. You may notice the image changing an occasionally
flashing (this is normal).
•Your LCD monitor provi es a self testing function, through which you
can check whether the LCD monitor functions are working properly.
•If your LCD monitor is properly connecte , but there is no image
showing an the in icator lights up in orange, please follow the below
steps:
•Shut own the computer an the LCD monitor.
•Unplug the signal connector from the back of the computer.
•Turn the LCD monitor on.
•If the image connector is isconnecte or amage , a “No signal” sign
will pop up on the monitor.
•Turn off the LCD monitor an reconnect the signal cable, an then
turn the computer an LCD monitor on.
•If the LED of the LCD monitor is an orange colour after completing
the steps above, please check your VGA car an computer system.
Your monitor shoul be operating properly.

OSD Cont ol
1. Powe Switch Power On/Off.
2. LED Power In icator
Green = normal
Re = power saving
Off = power off.
3. Menu Automatically optimize positions, phase
an clock when OSD is not shown.
4. Up This control is use for selection or
a justment when OSD is show.
5. Down This control is use for a justment
when OSD is shown.
6. Auto/Esc Enter OSD access sub-menu an
selection.
VGA Signal
Connecto
Pin 1 Analog re input.
Pin 2 Analog green input.
Pin 3 Analog blue input.
Pin 4 Groun .
Pin 5 Digital groun .
Pin 6 Analog re groun .
Pin 7 Analog green groun .
Pin 8 Analog blue groun .
Pin 9 Groun .
Pin 10 Sync groun .
Pin 11 Groun .
Pin 12 SDA (DDC Data).
Pin 13 H. Sync or H + V Sync.
Pin 14 V. sync.
Pin 15 SCL (DDC CLK).

CGA /EGA
Signal Connecto
Pin 1 CGA analog re input.
Pin 2 CGA analog green input.
Pin 3 CGA analog blue input.
Pin 4 Groun .
Pin 5 V. Sync
Pin 6 H + V Sync or H. Sync
Pin 7 No Connection
Pin 8 Groun
Pin 9 V Sync
Pin 10 H + V Sync or H. Sync
Adjusting the
Image
•Press the menu button to start the OSD feature.
•Click the “Up” or “Down” button to select the function to be a juste .
•Click the “Menu” button to access into the function to be a juste .
•Click the “Up” or “Down” button to change the current setting of the
function selecte .
•To exit the OSD menu or go back to a previous menu click the
“Auto/Esc” button. Upon exiting the menu your changes will
automatically save .
•If after pressing the menu button, the OSD button will isappear, if no
a itional buttons are presse for several secon s. If this occurs, any
a justments ma e, will still be automatically save .
•Due to the automatic save feature, turning off the power is unwise
while navigating the menu.

Please Note: Due to the a vance nature of this panel. A justments to
clock, phase an image positioning are save only for the signal timing
you are currently using. Meaning if your input is CGA 640 x 215 @60Hz,
an you a just the clock setting. This will only affect this timing.
So when your change input to VGA 640 x 480 @60Hz for example the clock
will be at its efault (or last memory save setting). This is to allow the user to
get a picture perfect for every input he requires an avoi re oing settings
each time the input is change .
Except for these a justments, clock, phase an image positioning, all other
a justments are universal for example changing the brightness setting will
change the brightness setting for all inputs an timings.
To help the User remember; all settings that only affect the timing you’re
currently using are coloure pink an the universal settings are coloure
white.
Menu Options
Main Menu
IMAGE
SETTINGS
Cont ast A just the contrast of the image.
B ightness A just the brightness of the screen.
Gamma A just the gamma level of the image.
Colou
Tempe atu e
9300K Set up the colour temp. to be 9300 K white
colour.
6500K Set up the colour temp. to be 6500 K white
colour.
5800K Set up the colour temp. to be 5800 K white
colour.
Use RGB A just the Re , Green, Blue colour values
separately
FEATURE
CONTROLS
Auto Colou Automatically a justs the colour for you
Sc een Test Performs a series of colour tests to show that
the screen is working correctly.
Language Select a language for the menu to appear in
(English, French, German [Deutsch], Italian,
Spanish an Chinese an Japanese)
Input Sou ce Provi es information on your current input
such as resolution an refresh rate.
OSD Time Increase or ecrease the length of time the
“on screen isplay” menu will stay visible
with any button pressing

Advanced
Options
If you select the Image Alignment Option, you will get a second menu which
deserves further explanation
Automatic Options
Auto align The panel will automatically
choose the best position and
size for your input
Manual Options
Position position the image including up,
down, left or right
H-size (crushes the image horizontal,
to fit on the size)
V-size (crushes the image ertical, to
fit on the size)
Warning: Phase and Clock Settings shouldn’t be touched unless you know
what you’re doing. Altering these values can make the image unwatchable
on the screen
Suppo t
CGA/EGA/VGA
Timings
Type H. F equency.
(kHz)
V. F equency
(Hz)
Resolution
CGA 15.4 58.8 640x198 @ 58
CGA 15.1 57.6 640x215 @ 57
CGA 15.7 60 640x215 @ 60
CGA 16.0 61 640x215 @ 61
CGA 16.3 62 640x215 @ 62
CGA 16.6 63.4 640x215 @ 63.4
CGA 16.800 64 640x215 @ 64
CGA 15.6 50.3 640x265 @ 50
CGA 18.4 50 640x350 @ 50
EGA 21.8 58.9 640x350 @58
EGA 24.4 59.5 645x355 @59
EGA 23.5 52 720x378 @52
EGA 26.4 57.4 720x400 @57
VGA 31.469 70.087 640x400 @ 70
VGA 31.469 59.940 640x480 @ 60
VGA 37.861 72.809 640x480 @ 72
VGA 37.500 75.000 640x480 @ 75
SVGA 35.156 56.250 800x600 @ 56
SVGA 37.879 60.317 800x600 @ 60
SVGA 48.077 72.188 800x600 @ 72
SVGA 46.875 75.000 800x600 @ 75

XGA 48.363 60.004 1024x768 @ 60
XGA 56.476 70.069 1024x768 @ 70
XGA 60.023 75.029 1024x768 @ 75
F ont View
Side View

Specifications
Aspect Ratio: 4:3
Weight: 3.072kg
Dimensions (cm's): 35.5(w) x 5.5( ) x 26.8(h)
Input Mode: CGA/EGA/VGA/SVGA/XGA
Max Resolution: 1024 x 768
RGB CGA/EGA Input connections:10 pin in-line plug.
RGB VGA Input connection: 15 pin D-sub socket.
Windows Compatibility: 98, 2000, XP
PC Inte face: Analog Interface
Input Signal: 0.7Vpp Analog 75ohm
Sync: TTL level Separate, Composite,
Sync Pola ity: Positive (+ve) & Negative (-ve)
Scan F equency Ho izontal: 15~60KHZ
Scan F equency Ve tical: 48~75Hz
Sc een Ho izontal Size: 310mm
Sc een Ve tical Size: 233mm
Colo Suppo t: 16.2M Colors
5 Function Keys: Power, Menu/Auto, Up, Down,
Source/Esc
OSD Funcions: Contrast, Brightness, Sharpness,
Phase, Clocking, Colour
Temperature, Colour RGB, Auto
Colour, Image Alignment H an V),
Screen test, OSD Timer, Language
an Input source.
Powe : 100~240V 47/63Hz via 12VDC 4A
a apter (Please specify when
Or ering)
Powe Consumption: 40W Max
Powe Management: VESA-DPMS 40 watts. Power own
mo e </=3 Watts.
Bandwidth: 90MHz Dot Clock
Pixel Pitch(mm): 0.297 x 0.297
Backlight: CCFL x 4
Cell Type: TN
Cont ast Ratio: 400:1 Type
B ightness: 250c /m square
Viewing Angle: H=160 egrees, V=160 egrees
Response Time: 25ms(on + off) Type
Ope ating Tempe atu e: 0 egrees ~ 40 Degrees
Humidity: 10~85%