Cool-Living CL-RAC15EWES User manual

WWW.COOLLIVINGPRODUCTS.COM OR EMAIL [email protected]
CL-RAC15EWES-6A
CL-RAC18EWES-6A
CL-RAC24EWES-6A

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

5/8" Long Hex-headScrew
1/2" Long Hex-headScrew
5/8" Long FlatHead Bolt and
Locknut
5/16" Long Hex-headScrew
Sill Angel Bracket
1/2" Long FlatHead Bolt and
Locknut
Gasket
Support Bracket(with R and L
remark)

15K/18K
17.91 18.625
23.625 26.50
19.00 19.50
28.00 30.00
41.00 41.00
22K/24K
SASH
SASH
1/2 MIN
1/2 MIN
19 MIN
19 1/2 MIN
FIG.1
FIG.3
Storm Window Frameor Obstruction
Storm Window Frameor Obstruction
FIG.2
FIG.4
SASH
SASH
1/2 MIN
1/2 MIN
19 MIN
19 1/2 MIN
1/2 MIN
1/2 MIN
Storm Window Frame
or Obstruction
Storm Window Frame
or Obstruction

FIG.5 FIG.6 FIG.7
FIG.8 FIG.9

FIG.10
FIG.11
FIG.12
5/16" Long
Hex-head Screw
FIG.13a FIG.13b
FIG.14
5/16
Long
Hex-head
Screw

5/8" Long Flat Head Bolt
Long Flat head
Bolt and Locknut
Long
Flat head Bolt
and Locknut
5/8" Long
Hex-head Screw
Gasket

5/8" Long
Hex-head Screw
1/2" Long
Hex-head Screw
5/8" Long
Hex-head Screw
Sash Lock

FIG.15
15K/18K
18 1/4 (46.4 cm)
23 7/8 (60.6 cm)
22K/24K
19 1/2 (49.5 cm)
26 9/10 (68.3 cm)
Y
FIG.16

FIG.17
FIG.18
FIG.19
FIG.20

1
2
3
4
5
6
7
8
9
AUTO
SPEED
AUTO
MODE
TIMER ON: WHEN THE UNIT IS IN STANDBY, PRESS THE TIMER BUTTON TO SET THE TEMPERATURE, THEN PRESS
THE TIMER BUTTON TO SET THE TIMER TO ON, AND PRESS " " AND " " BUTTON TO ADJUST THE SETTING TIME
AS YOU NEED, AFTER THE DISPLAY IS STABLE, PRESS THE TIMER BUTTON TO CONFIRM.

horizontal wheelair deflector air deflector
PRESS THE SLEEP BUTTON, ALL OF THE DISPLAY LIGHTS WILL TURN OFF AFTER A WHILE, BUT
THE SLEEP LIGHT IS ALWAYS ON. IN SLEEP MODE, THE AIR CONDITIONER WILL AUTOMATICALLY ADJUST THE
TEMPERATURE AND FAN SPEED TO MAKETHE ROOM MORE COMFORTABLE DURING THE NIGHT. THE SET
TEMPERATURE WILL AUTOMATICALLY RAISE EVERY 30-60 MINUTES, AND AT MOST CHANGE SIXTIMES UNTIL THE
SET TEMPERATURE IS 81 OR 82 .

1
4
5
6
3
3
7
8
10
9
2
PRESS THE SLEEP BUTTON, ALL OF THE DISPLAY LIGHTS WILL
TURN OFF AFTER A WHILE, BUT THE SLEEP LIGHT IS ALWAYS ON. IN
SLEEP MODE, THE AIR CONDITIONER WILL AUTOMATICALLYADJUST
THE TEMPERATURE AND FAN SPEED TO MAKE THE ROOM MORE
COMFORTABLE DURING THE NIGHT. THE SET TEMPERATURE WILL
AUTOMATICALLY RAISE EVERY 30-60 MINUTES, AND AT MOST CHANGE
SIXTIMES UNTIL THE SET TEMPERATURE IS 81 OR 82 .
TIMER ON: WHEN THE UNIT IS IN STANDBY, PRESS THE TIMER BUTTON TO SET THE TEMPERATURE, THEN PRESS
THE TIMER BUTTON TO SET THE TIMER TO ON, AND PRESS " " AND " " BUTTON TO ADJUST THE SETTING TIME
AS YOU NEED, AFTER THE DISPLAY IS STABLE, PRESS THE TIMER BUTTON TO CONFIRM.

FIG.21