coolado tPump X User manual

Thank you for purchasing the Coolado tPump X!
Discover the endless usages of this little smart device
and share your experience on our website:
www.coolado.com
Please read this instruction manual carefully before using this product for the first time. It will guide you to
use it correctly and remind you of the relevant precautions. This pump is a professional tool and not a toy.
This product is a portable smart air pump, suitable for the inflation of car tires, motorcycle tires, bicycle
tires, balls and other high-pressure inflatables. When using this pump to inflate, please choose the correct
air pressure value required by the product (see list of preset values for indication only).
The product and tube will get hot after long use (>10 min) After long use please allow the pump to cool
down for at least 15 minutes before proceeding. Keep away from children.
CORDLESS HIGH-PRESSURE AIR PUMP FOR TIRES
T·PUMP X USER MANUAL

Please charge the battery before using the product for
the first time.
Use the charging cable to connect to a 5V 2A charger
(not included).
The battery indicator will light when charging:
# Blue light flashing: charging
# Green light steady: fully charged
-
-
-
Charging
Steady blue light: battery power >30%
Steady red light: battery power 20% -30%
Flashing Red light: battery power <20% needs to be
charged
1
2
3
The battery indicator light is always on by showing
different colors to indicate the remaining power:
Battery indicator
Pull the hose out of the pump and it will automatically
turn on and the display will light up.
ln the power-on state after 180 seconds without any
operation, the display will automatically turn off.
When the hose is pulled out, you can press and hold
the "Start -Stop button" to turn on again after
automatic turn off
1
2
3
Turning on the pump and display
4. OPERATING INSTRUCTIONS
4
3
1
2
Tube with Schrader Valve
Presta valve adaptor
Plastic nozzle adaptor
Ball needle adaptor
1
2
3
4
3. INCLUDED ADAPTORS
6
7
4
89
10
11
12
5
2
1
3
Battery indicator light
Unit switch button
Light on/off button
“ + " button
Start-Stop button
" - " button
7
8
9
10
11
12
Tube
Schrader Valve
Touchscreen display
Tube socket
Signal flashlight
Charging port (USB-C)
1
2
3
4
5
6
2. PRODUCT DESCRIPTION
- tPump X
- Tube with Schrader valve adaptor
- 3 accessory adaptors
- Presta valve adaptor
- Plastic nozzle adaptor
- Ball needle adaptor
- USB-C recharge cable
- Protective case
1. BOX CONTENTS
The tPump X is a portable smart air compressor, suitable for
the inflation of car tires, motorcycle tires, bicycle tires, balls,
and other high-pressure inflatables.

Inflatable pressure range 0.2~10.3bar/3~150psi
Product size Ø70x140mm (size without hose)
Working temperature Charging: 0°C~45°C
Discharging: -10°C~45°C
Storage temperature -10°C~45°C
Trachea size 175±5mm, including air nozzle
Battery capacity 2600mAh
Working noise 1 meter = less than 75dB
Input current 5v 2A
Charging interface USB-Type-C
Charging time Less than 4 hours
Air pressure gauge accuracy 35±1.5psi
Common unit conversion: 1 bar= 14.5psi, 1 bar= 100kPa.
8. PRODUCT PARAMETERS
Product category Product type Recommended pressure
Bicycle
Motorbike
Car
Ball
12-16 inch tires
20-24 inch tires
26-29 inch tires
Motorbike tires
Small car tires
Basketball
Football
Volleyball
Rugbyball
30-50 psi / 2,0-3,5 bar
40-50 psi / 2,7-3,5 bar
45-65 psi / 3,0-4,5 bar
25-45 psi / 1.8-3.0 bar
35-40 psi / 2.2-2.8 bar
7-9 psi / 0,5-0,6 bar
8-16 psi / 0,5-1,1 bar
4-5 psi / 0,3-0,4 bar
12-14psi / 0,8-1,0 bar
In order to ensure safety, before using the product to
inflate, please inquire about the air pressure value
required by the inflated item by reading the instructions
or other ways to avoid accidents caused by low-pressure
or over-pressure.
Suitable air pressure value for common products
7. CHOOSE THE RIGHT AIR PRESSURE
In the power-on state, when the air tube is connected to
the product to inflate the display will show the actual air
pressure value.
6. DETECTION OF AIR PRESSURE
SCHRADER Valve
Mountain bikes
Electric bikes
Motorcycles
Cars
The tube is standard equipped with a Schrader valve
suitable for:
just connect it directly.
1
2
3
4
PRESTA Valve adaptor
Connect the Presta adapter to the tube of the pump,
then connect the tube to the Presta valve suitable for:
Road bikes
Mountain bike
1
2
Ball needle adaptor
Connect the ball needle adapter to the tube of the pump,
moisture the needle a little and plug it into the valve of
the ball. Suitable for:
Basketball,
Football
Other kinds of balls.
1
2
3
Plastic nozzle adaptor
Connect the plastic nozzle adapter to the tube of the
pump, use this nozzle on soft rubber valves.
Suitable for:
Pool floats
Blow up toys
1
2
5. USE OF THE DIFFERENT ADAPTORS

9. PRESET PRESSURE VALUES
MODE SWITCH
Short press "Mode button" to switch between the following
five inflation scenarios. Select the correct inflation scene
before inflation, and long-press the "mode button"
to switch between bar and psi.
The factory default preset pressure value is 35psi,the preset
pressure can be adjusted freely before operation (values and
units can be memorized). Adjustable range: 3-150psi
Bicycle mode light: the default 45psi
Adjustable range: 30-65psi
Motorcycle mode light: the default 2.4bar
Adjustable range: 1.8-3.0bar
Car mode light: the default 2.5bar
Adjustable range: 1.8-3.5bar
Ball mode light: default 8psi
Adjustable range: 4-16psi
FINE-TUNING PRESETS
After selecting the scene mode, short press "+" or "-" to
accurately adjust the preset pressure value;
Long press "+" or "-" to quickly adjust the pressure value.
When adjusting the preset pressure value, the number flashes
to indicate the target pressure adjustment status, and the long
light digital indicates the current pressure value.
MULTIFUNCTIONAL LIGHTING
Press the "light button" to turn on the light. Press repeatedly
to switch the light mode to white light, red warning light, and
red SOS light.
START INFLATING
Press the "start/stop button" to start inflation. The screen
will display the current pressure value. The pump will
generate normally between 75-80 dB noise during inflation.
Working for a long time, the hose and the pump itself will
get hot, avoid long-term usage of the pump (>10 minutes)
and avoid contact with the hot air hose and the pump.
Let it cool before you touch it.
STOP INFLATING
When the air pressure reaches the preset pressure value,
the air pump will automatically stop working.
During the inflation process, you can also stop the pump by
short pressing the "start/stop button"
SHUTDOWN
In the power-on state, the pump will power off automatically
after inserting the air hose after 10 seconds without any
operation. In the power-on state, press the Start/stop button
for several seconds to shut down manually.
BATTERY AND BATTERY LIFE
10. SPECIAL NOTES
Fully charged at 25°C ambient temperature, the
continuous working time is about 30 minutes.
Higher pressures or lower ambient temperatures will
reduce the battery working time.
-
-
The inflation pressure of items such as balloons, toy
balls, swimming rings and other products is lower than
the range of this air pump, and the inflation cannot be
automatically stopped by the preset pressure. The
Coolado ePump is a better choice for these items.
Before inflating, please confirm the air pressure value
required to avoid injury caused by over-inflation
bursting.
Please avoid putting it in a high-temperature environ-
ment such as a car that can be exposed to direct
sunlight;
Do not bend or step on the inflation tube during
inflation to keep the airflow smooth.
Stay near the pump when the air pump is working and
make sure the air pump is not over-pressurizing.
Protect the pump against moisture, heavy falls, water
immersion, and mud or sand intrusion;
There is a DC motor in the air pump, which may
generate electric sparks during operation. So do not
put it near flammable liquids or gases when in use.
This product is a professional tool and not a toy, keep
away from children; keep a safe distance from children
when inflating objects;
Before setting the inflation pressure value, please
make sure that you have selected the correct measure-
ment unit, it may lead to high air pressure danger.
-
-
-
-
-
-
-
-
-

11. TROUBLESHOOTING
MALFUNCTION SOLUTION
Slow inflation Check whether the battery is sufficiently
charged
Check if the air hose is leaking
Check if the connection parts on both
ends of the air tube are tight.
1.
2.
3.
Can’t inflate when
turning on
Check if the air tube is pulled out, you
need to pull out the hose to start inflation.
Check if the power is sufficient
Check if the current tire pressure value is
higher than the preset value
1.
2.
3.
Cannot increase or
decrease the preset
pressure
Check if you are in an incorrect mode.
Select the free mode without any icon lit,
and the preset value can be adjusted
within the range of 3-150psi
1.
2.
Normal inflation but
screen shows 0
Balloons and other low-pressure inflatables
products are not within the measurable
range of the device
The air pump has shut
down automatically
after screwing the
valve adapter
Press the Start/Stop button to turn on the
pump again
Air leakage when
connecting the tube
Tighten the tube
The color of the power
indicator in the inflated
state is inconsistent
with the standby state
The power lithium battery has a significant
voltage drop during operation, which results
in a color change of the indicator light
between the standby mode and the
operation mode. This is not a malfunction.
12. CLEANING & MAINTENANCE
The Coolado t-Pump needs only to be cleaned on the
outside surface with a dry, soft cloth.
The product has a built-in non-removable lithium
battery. Please do not throw the product into fire or
discard il carelessly. The lithium battery may cause fire,
spontaneous combustion or explosion due to
overheating, impact and water ingress.
The storage temperature of the product should not be
lower than -10 ° C or higher than 45 ° C. Excessive
heat or cold will shorten the product's lifetime and
damage the built-in battery.
The battery may be damaged if not used for a long
time. It is recommended to charge the pump at least
once every three months.
-
-
-
-
13. WARRANTY
The Coolado warranty is in accordance with the EU
law and regulations
15 days money-back guarantee from purchasing date.
The pump must be returned to its original undamaged
package. (See return policy on our website)
Coolado provides a 1-year warranty for failures
caused by normal operation according to the manual.
Improper use of the product and man-made damage is
not covered by the warranty.
Replace the product; it needs to be packaged
completely.
The warranty is limited to the value of the pump.
Damages to the Coolado tPump caused by, but not
limited to abuse, abnormal operation, water damage,
non-advised power supply, high temperatures, motor
burn caused by the high-voltage power supply, All
man-made damage. Self-disassembly and accidental
damage, damages caused by force majeure are not
covered by the warranty.
The liability of Coolado will ALWAYS be limited to the
value of the pump.
Coolado will not be liable for damages to persons
and/or property.
-
-
-
-
-
-
-
-
-
On our website, you can find this manual
in multiple languages.
Scan this QR Code or go to our website:
https://www.coolado.com/manuals