Cooledge CASAMBI CONTROL User manual

EXT-0085-R00-12302020 (LTR) 1/19
O [phone]
F [phone]
T [phone]
W cooledgelighting.com
Cooledge Lighting Inc.
110-13551 Commerce Parkway
Richmond, BC V6V 2L1 Canada
Cooledge Lighting reserves the right to change
materials or modify the design of its product
without notification as part of the company’s
continuing product improvement program.
For detailed instructions,
please refer to: EXT-0071
COOLEDGE CONTROL MODULE
USER GUIDE
Avaliable at
cooledgelighting.com
Control Module is suitable for use in dry locations only (IP20). Damage to CONTROL MODULE and/or light sheets may occur if wired incorrectly.
All devices should always be disconneced from mains power
supply and verify its absence prior to installation/maintenance.
FCC STATEMENT:
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CONTROL MODULE must be installed by a qualified electrician.
90W 90W 90W 90W
58V*
AC
POWER
SUPPLY (PSU)
CASAMBI
CONTROL
MODULE
DALI
* For use with 58VDC power supplies ONLY.
COOLEDGE POWER & CONTROL - USER GUIDE
CASAMBI CONTROL
Compatible Part No’s Mode
CTR-SCT-CAS-58V Static Color Temperature SCT (Page 4)
CTR-TNW-CAS-58V Tunable White TNW (Page 5)
CTR-DTW-CAS-58V Dim-To-Warm DTW (Page 6)
5 Year Limited Warranty:
Parts and workmanship
E354088 E354088
E354088
E354088
58VDC
E354088
LISTED
Tc
5
5
Y
E
A
R
W
A
R
R
A
N
T
Y
5
Y
E
A
R
W
A
R
R
A
N
T
Y
™
™

EXT-0085-R00-12302020 (LTR) 2/19
cUL Listed 58V Control Module 100W PSU* 200W PSU 400 PSU
Dimensions (in) 8.7 x 2.6 x 1.4 11 x 4 x 3 9.6 x 2.8 x 1.5 16.0 x 4.9 x 1.7
CE Compliant 58V Control Module 100W PSU 200W PSU 400 PSU
Dimensions (mm) 220 x 66 x 36 199 x 63 x 35 244 x 71 x 38 407 x 124 x 43
INPUT POWER - 58VDC: 100W / 200W / 400W - SELV
1) Fasten module in position by using the two mounting
slots. (Fasteners not supplied)
2) Terminal covers support 1/2” strain relief of conduit.
Conduit or armoured cable must be used on power
input cable.
3) Thread cables through conduit/strain reliefs and
covers; then make connections as required.
4) Snap covers in position and secure with provided
fasteners.
* The 100W PSU (58V) cUL version is not compatible with Cooledge Control Modules.
MOUNTING COOLEDGE CONTROL MODULE
Please refer to EXT-0071 Cooledge Control Module User Guide
for more information regarding the status LED indicator.
(+) 58VDC
(-) GND
PSU 58V
100/200/400W
Status LED
PSU 58V
400W
+
-
+
-
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
Optional wiring methods for TNW and DTW
installations using the 400W 58V PSU.

EXT-0085-R00-12302020 (LTR) 3/19
INTRODUCTION TO COOLEDGE CONTROL MODULE
The Cooledge Control Module receives a single DC power input from a constant voltage power supply 58V and converts it into up
to 4 controlled output channels of max. 90W each. Input signals from 3rd party controllers are used to control dimming and CCT
tuning (if applicable). The control protocol required to interface with the controller determines which Control Module product model
is required: DALI (0/1-10V), DMX, or Wireless (Casambi).
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
Output Channel
and Power Input Cover
DIP Switch
Cover
Controls Input
Cover
Output
Channels
Status LED
Power
Input
Mode and Addressing DIP Switch
Wireless Card
0/1 - 10V
Inputs
DALI
Inputs
0-10V INPUTDALI
To access the DIP switches for selecting the operational mod, unfasten the cover screw and rotate cover out of the way.
Positions 1-3 are used to identify the controller mode. Settings for each mode are explained in each section.
- Switches 1 - 3: Control Module MODE

EXT-0085-R00-12302020 (LTR) 4/19
Wireless models of Cooledge Control Module are shipped with a factory-installed card that enables the Casambi functionality.
It is possible to convert a DALI or 0-10V model to a wireless model by installing this card. Conversely, it is possible to convert a
wireless model to a DALI or 0/1-10V model by removing the card found in the location indicated in the illustration below.
Warning: When inserting/removing the wireless card do so with the component side towards the DIP switch and only after Control
Module was powered o.
Wireless card found under Cooledge Cover
The Cooledge Control Module is capable of wireless control through the Casambi app (free on IOS and Android Devices).
To download the Casambi App and access other relevant documentation please visit www.casambi.com/downloads.html.
Consult the “Short User Guide to the Casambi App” at:
https://casambi.com/static/datasheets/short-user-guide.pdf” for additional information related to setting up and using Casambi
Control Priority:
When the wireless chip is installed in the Control Module all other inputs are ignored (0-10V or DALI), even those that are connected
CASAMBI APP OR CASAMBI SOFTWARE
Xpress
Smartwatch Smartphone Tablet
Push button Switch

EXT-0085-R00-12302020 (LTR) 5/19
BASIC STEPS TO SET-UP COOLEDGE WIRELESS SMART CONTROLLER
1. Create a New NetworkDownload the CASAMBI APP
2. Include new devices to the network: 3. Select a Profile
The Cooledge control module has 3 standard profiles and 1
custom profile:
CE-NDRV-4 for Single Color Mode (SCT)
CE-NDRV-2-TW for Tunable White Mode (TNW)
CE-NDRV-2-DTW for Dim-to-Warm Mode (DTW)
CE-NDRV-2-STW for Synchronized TNW (STW) - CUSTOM PROFILE
When accessing the controller shipped with one of the profiles
listed above, the Casambi App will list your device as unpaired
under “Nearby Devices”. For example If your controller is a SCT
Mode device, the list will show a CE-NDRV-4 profile as in the
picture below:
Select: “Create a new
network”
Assign a name to
the new network
Search for
nearby devices

EXT-0085-R00-12302020 (LTR) 6/19
4. Add device to the network: 5. Control the paired unit
Select: “Add to...” to pair the
device to the wireless network
The device is now paired
to the network
Once paired device to the network, it can be controlled
as follows:
If CE-NDRV-4 has been added to the network, the APP
will show as below:
If CE-NDRV-2-TW has been added to the network, the APP
will show as below:
For this profile there are 4 available sliders to control the luminaires:
They are assigned as follows:
For SCT CH1:
Slider 1 “DIMMER”
For SCT CH2:
Slider 2 “DIMMER”
For SCT CH3:
Slider 3 “DIMMER”
For SCT CH4:
Slider 4 “DIMMER”

EXT-0085-R00-12302020 (LTR) 7/19
If CE-NDRV-2-DTW has been added to the network, the APP
will show as below:
For thisprofilethereare4availablesliders tocontrolthe luminaires:
They are assigned as follows:
For TNW CH1:
Slider 1 “DIMMER” + Slider 3 “CCT1”
For TNW CH2:
Slider 2 “DIMMER” + Slider 4 “CCT1”
If CE-NDRV-2-STW has been added to the network, the APP
will show as below:
For this profile there are 2 available sliders to control the luminaires:
They are assigned as follows:
For DTW CH1:
Slider 1 “DIMMER”
For DTW CH2:
Slider 2 “DIMMER”

EXT-0085-R00-12302020 (LTR) 8/19
For this profile there are 2 available sliders to enable the two
TNW channels to work synchronized::
They are assigned as follows:
For both TNW CH1 and TNW CH2:
Slider 1 “DIMMER” controls the brightness
synchronized for both TNW channels
For both TNW CH1 and TNW CH2:
Slider 2 “CCT” controls the color synchronized for
both TNW channels
Swiping horizontally the device icon, a single Dim adjustable
slider appears as shown below to allow synchronized control
of the Dim level for both TNW channels of the unit:
Swiping vertically the device icon, a single CCT adjustable
slider appears as shown below to allow synchronized control
of the CCT value for both TNW channels of the unit:
For additional information related to setting up and using
Casambi for more features: groups, scenes, animations,
timers, circadian profiles, sensors, switches, consult the
“Short User Guide to the Casambi App” at: https://
casambi.com/static/datasheets/short-user-guide.pdf

EXT-0085-R00-12302020 (LTR) 9/19
SCT MODE
Static color temperature is a mode in the Control Module used for controlling the dimming features of the following Cooledge
products, having a fixed color temperature:
TILE Interior, TILE Exterior, and LINE. There are 4 output channels, each channel can handle up to a 90W load.
*Factory set.
DIP switch setting can be adjusted if another dimming curve is required. See APPENDIX B.
Warning! Changing DIP Switch Setting must be performed only after unit is powered down
Choose the DIP Switch settings from the tables below to achieve the desired dimming level.
- Switches 1 - 3: Control Module MODE
Dimming Protocol Mode Switches 1-3 (Log)* Mode Switches 1-3 (Linear)
Wireless SCT 0-0-0 0-0-1
OUTPUT CONNECTIONS: STATIC COLOR TEMPERATURE (SCT)
PSU 58V:
100/200/400W
CH4
CH3
CH2
CH1 +
-
+
-
+
-
+
-
CH4: 90W CH3: 90W
CH2: 90W CH1: 90W
RED OR WHITE
BLACK
RED OR WHITE
BLACK
RED OR WHITE
BLACK
RED OR WHITE
BLACK
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
PSU 58V:
100/200/400W
CH3: 90W
BLACK
Relevant Part No’s:
CTR-SCT-CAS-58V
LOG MODE LIN MODE

EXT-0085-R00-12302020 (LTR) 10/19
TUNABLE WHITE (TNW)
Tunable White is a mode in the Control Module to be used in conjunction with TILE Tunable White. Powering the controller in this
mode can be done with 58V 100W/200W/400W drivers. A 400W driver can power up to 2 Control Modules
Warming: Changing DIP Switch Setting must be performed only after unit is powered down
See dimming curve for Tunable White Mode in APPENDIX C.
- Switches 1 - 3: Control Module MODE
PSU 58V
100/200W
CH 1 & 2: 90W
CH 3 & 4: 90W
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
RED OR WHITE
BLACK
RED OR WHITE
BLACK
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
CH 3 & 4
CH 1 & 2
OUTPUT CONNECTIONS: TUNABLE WHITE (TNW)
Relevant Part No’s:
CTR-TNW-CAS-58V
Dimming Protocol Mode Switches 1-3
Wireless TNW 0-1-0

EXT-0085-R00-12302020 (LTR) 11/19
DIM-TO-WARM (DTW)
Dim-to-Warm is a mode in the Control Module to be used in conjunction with the Dim-to-Warm option of TILE Tunable White.
In this mode the CCT will adjust from 2200K at lowest dim setting to 3500K at the highest dim setting. This mode can be used with
58V *100/200/400W systems. A 400W driver can power up to 2 Control Modules
Warming: Changing DIP Switch Setting must be performed only after unit is powered down
- Switches 1 - 3: Control Module MODE
3600
3400
3200
3000
2800
2600
2400
2200
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Dim Level
CCT (K)
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
RED OR WHITE
BLACK
RED OR WHITE
BLACK
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
OUTPUTS
CH 1 & 2: 90W
PSU 58V
100/200W
CH 3 & 4: 90W
Figure 1: Dim Inputs vs CCT Output
CH 3 & 4
CH 1 & 2
Dimming Protocol Mode Switches 1-3
Wireless TNW 0-1-1

EXT-0085-R00-12302020 (LTR) 12/19
TNW SYNCHRONIZED OUTPUTS MODE
If this custom Casambi profile is activated the two TNW channels of a Smart Controller will be synchronized. This custom profile has only
one Dimmer and one CCT slider and adjusting either one of these sliders will cause the corresponding change in Dim Level or CCT to
both TNW outputs of the Smart Controller.
Furthermore, when more than one Smart Controller is grouped within the Casambi App and a user performs a press and hold of the
group icon in the App, only one Dimmer and one CCT slider will appear, allowing all channels of all grouped Smart Controllers to be
adjusted in a synchronized fashion. Additionally, when a user touches the Group icon and swipes horizontally a single horizontal Dim
adjustment slider shall appear to allow synchronized control of the Dim level of all units in the Group. When swiping vertically over the
Group icon a single CCT slider shall appear to allow synchronized control of the CCT of all units in the Group.
3600
3400
3200
3000
2800
2600
2400
2200
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Dim Level
CCT (K)
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
RED OR WHITE
BLACK
RED OR WHITE
BLACK
CH 1+
CH 1-
CH 2+
CH 2-
CH 3+
CH 4+
CH 3-
CH 4-
+VIN
GND
OUTPUTS CONNECTIONS FOR STW MODE
CH 1 & 2: 90W
PSU 58V
100/200W
CH 3 & 4: 90W
CH 3 & 4
CH 1 & 2
Dimming curves for STW MODE are in APPENDIX C.
DIP SWITCH SETTING FOR TNW SYNCHRONIZED MODE

EXT-0085-R00-12302020 (LTR) 13/19
STANDALONE MODE
Standalone mode gives a pre-defined user -selectable fixed dimming and/or color output. No external control input is required.
When one of the operational modes (Standalone or Dynamic Test) is selected through the DIP Switch setting, the module will ignore
0-10V commands and operate according to the settings, in either LOG or LINEAR MODE.
There are two modes that follow the dimming curves presented in Appendix A.
X = IGNORED
Choose the DIP Switch settings from the tables below to achieve the desired dimming level.
STANDALONE SCT MODE
Standalone SCT Mode Switches 1-3 Switches 4-12 (Intensity)
Fixed Dimming Level - LOG 1-0-0 X-X-X-X-X-X-X-X-0
Fixed Dimming Level - LINEAR 1-0-0 X-X-X-X-X-X-X-X-1
LOGARITMIC DIP SETTINGS/DIMMING LEVELS FOR STANDALONE SCT
Level
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
DIP SETTING
00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
00001011
00001100
00001101
00001110
00001111
00010000
00010001
00010010
00010011
00010100
00010101
00010110
00010111
00011000
00011001
00011010
00011011
00011100
00011101
00011110
00011111
00100000
00100001
00100010
00100011
00100100
00100101
00100110
00100111
00101000
00101001
00101010
00101011
00101100
00101101
00101110
00101111
00110000
00110001
00110010
Output(%)
0
0.100
0.103
0.106
0.109
0.112
0.115
0.118
0.121
0.124
0.128
0.131
0.135
0.139
0.143
0.147
0.151
0.155
0.159
0.163
0.168
0.173
0.177
0.182
0.187
0.193
0.198
0.203
0.209
0.215
0.221
0.227
0.233
0.240
0.246
0.253
0.260
0.267
0.275
0.282
0.290
0.298
0.306
0.315
0.324
0.332
0.342
0.351
0.361
0.371
0.381
Level
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
Output(%)
0.392
0.402
0.414
0.425
0.437
0.449
0.461
0.474
0.487
0.501
0.515
0.529
0.543
0.559
0.574
0.590
0.606
0.623
0.640
0.658
0.676
0.695
0.714
0.734
0.754
0.775
0.796
0.819
0.841
0.864
0.888
0.913
0.938
0.964
0.991
1.018
1.047
1.076
1.105
1.136
1.167
1.200
1.233
1.267
1.302
1.338
1.375
1.413
1.452
1.492
1.534
DIP SETTING
00110011
00110100
00110101
00110110
00110111
00111000
00111001
00111010
00111011
00111100
00111101
00111110
00111111
01000000
01000001
01000010
01000011
01000100
01000101
01000110
01000111
01001000
01001001
01001010
01001011
01001100
01001101
01001110
01001111
01010000
01010001
01010010
01010011
01010100
01010101
01010110
01010111
01011000
01011001
01011010
01011011
01011100
01011101
01011110
01011111
01100000
01100001
01100010
01100011
01100100
01100101
DIP SETTING
01100110
01100111
01101000
01101001
01101010
01101011
01101100
01101101
01101110
01101111
01110000
01110001
01110010
01110011
01110100
01110101
01110110
01110111
01111000
01111001
01111010
01111011
01111100
01111101
01111110
01111111
10000000
10000001
10000010
10000011
10000100
10000101
10000110
10000111
10001000
10001001
10001010
10001011
10001100
10001101
10001110
10001111
10010000
10010001
10010010
10010011
10010100
10010101
10010110
10010111
10011000
Level
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
Level
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
Output(%)
6.344
6.520
6.700
6.886
7.076
7.272
7.473
7.680
7.893
8.111
8.336
8.567
8.804
9.047
9.298
9.555
9.820
10.091
10.371
10.658
10.953
11.256
11.568
11.888
12.217
12.555
12.902
13.260
13.627
14.004
14.391
14.790
15.199
15.620
16.052
16.496
16.953
17.422
17.905
18.400
18.909
19.433
19.971
20.524
21.092
21.675
22.275
22.892
23.526
24.177
24.846
Level
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
Output(%)
25.534
26.241
26.967
27.713
28.480
29.269
30.079
30.911
31.767
32.646
33.550
34.479
35.433
36.414
37.422
38.457
39.522
40.616
41.740
42.895
44.083
45.303
46.557
47.846
49.170
50.531
51.930
53.367
54.844
56.362
57.922
59.526
61.173
62.866
64.607
66.395
68.233
70.121
72.062
74.057
76.107
78.213
80.378
82.603
84.889
87.239
89.654
92.135
94.686
97.307
100.000
Output(%)
1.576
1.620
1.665
1.711
1.758
1.807
1.857
1.908
1.961
2.015
2.071
2.128
2.187
2.248
2.310
2.374
2.440
2.507
2.577
2.648
2.721
2.797
2.874
2.954
3.035
3.119
3.206
3.294
3.386
3.479
3.576
3.675
3.776
3.881
3.988
4.099
4.212
4.329
4.449
4.572
4.698
4.828
4.962
5.099
5.240
5.385
5.535
5.688
5.845
6.007
6.173
DIP SETTING
11001100
11001101
11001110
11001111
11010000
11010001
11010010
11010011
11010100
11010101
11010110
11010111
11011000
11011001
11011010
11011011
11011100
11011101
11011110
11011111
11100000
11100001
11100010
11100011
11100100
11100101
11100110
11100111
11101000
11101001
11101010
11101011
11101100
11101101
11101110
11101111
11110000
11110001
11110010
11110011
11110100
11110101
11110110
11110111
11111000
11111001
11111010
11111011
11111100
11111101
11111110
DIP SETTING
10011001
10011010
10011011
10011100
10011101
10011110
10011111
10100000
10100001
10100010
10100011
10100100
10100101
10100110
10100111
10101000
10101001
10101010
10101011
10101100
10101101
10101110
10101111
10110000
10110001
10110010
10110011
10110100
10110101
10110110
10110111
10111000
10111001
10111010
10111011
10111100
10111101
10111110
10111111
11000000
11000001
11000010
11000011
11000100
11000101
11000110
11000111
11001000
11001001
11001010
11001011

EXT-0085-R00-12302020 (LTR) 14/19
LINEAR DIP SETTINGS/DIMMING LEVELS FOR STANDALONE SCT
Level
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
DIP SETTING
00000000
00000001
00000010
00000011
00000100
00000101
00000110
00000111
00001000
00001001
00001010
00001011
00001100
00001101
00001110
00001111
00010000
00010001
00010010
00010011
00010100
00010101
00010110
00010111
00011000
00011001
00011010
00011011
00011100
00011101
00011110
00011111
00100000
00100001
00100010
00100011
00100100
00100101
00100110
00100111
00101000
00101001
00101010
00101011
00101100
00101101
00101110
00101111
00110000
00110001
00110010
Level
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
DIP SETTING
00110011
00110100
00110101
00110110
00110111
00111000
00111001
00111010
00111011
00111100
00111101
00111110
00111111
01000000
01000001
01000010
01000011
01000100
01000101
01000110
01000111
01001000
01001001
01001010
01001011
01001100
01001101
01001110
01001111
01010000
01010001
01010010
01010011
01010100
01010101
01010110
01010111
01011000
01011001
01011010
01011011
01011100
01011101
01011110
01011111
01100000
01100001
01100010
01100011
01100100
01100101
DIP SETTING
01100110
01100111
01101000
01101001
01101010
01101011
01101100
01101101
01101110
01101111
01110000
01110001
01110010
01110011
01110100
01110101
01110110
01110111
01111000
01111001
01111010
01111011
01111100
01111101
01111110
01111111
10000000
10000001
10000010
10000011
10000100
10000101
10000110
10000111
10001000
10001001
10001010
10001011
10001100
10001101
10001110
10001111
10010000
10010001
10010010
10010011
10010100
10010101
10010110
10010111
10011000
Level
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
Level
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
Level
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
DIP SETTING
11001100
11001101
11001110
11001111
11010000
11010001
11010010
11010011
11010100
11010101
11010110
11010111
11011000
11011001
11011010
11011011
11011100
11011101
11011110
11011111
11100000
11100001
11100010
11100011
11100100
11100101
11100110
11100111
11101000
11101001
11101010
11101011
11101100
11101101
11101110
11101111
11110000
11110001
11110010
11110011
11110100
11110101
11110110
11110111
11111000
11111001
11111010
11111011
11111100
11111101
11111110
DIP SETTING
10011001
10011010
10011011
10011100
10011101
10011110
10011111
10100000
10100001
10100010
10100011
10100100
10100101
10100110
10100111
10101000
10101001
10101010
10101011
10101100
10101101
10101110
10101111
10110000
10110001
10110010
10110011
10110100
10110101
10110110
10110111
10111000
10111001
10111010
10111011
10111100
10111101
10111110
10111111
11000000
11000001
11000010
11000011
11000100
11000101
11000110
11000111
11001000
11001001
11001010
11001011
Output (%)
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.1
3.5
3.9
4.3
4.7
5.1
5.5
5.9
6.3
6.7
7.1
7.5
7.9
8.3
8.7
9.1
9.4
9.8
10.2
10.6
11.0
11.4
11.8
12.2
12.6
13.0
13.4
13.8
14.2
14.6
15.0
15.4
15.7
16.1
16.5
16.9
17.3
17.7
18.1
18.5
18.9
19.3
19.7
Output (%)
20.1
20.5
20.9
21.3
21.7
22.0
22.4
22.8
23.2
23.6
24.0
24.4
24.8
25.2
25.6
26.0
26.4
26.8
27.2
27.6
28.0
28.3
28.7
29.1
29.5
29.9
30.3
30.7
31.1
31.5
31.9
32.3
32.7
33.1
33.5
33.9
34.3
34.6
35.0
35.4
35.8
36.2
36.6
37.0
37.4
37.8
38.2
38.6
39.0
39.4
39.8
Output (%)
40.2
40.6
40.9
41.3
41.7
42.1
42.5
42.9
43.3
43.7
44.1
44.5
44.9
45.3
45.7
46.1
46.5
46.9
47.2
47.6
48.0
48.4
48.8
49.2
49.6
50.0
50.4
50.8
51.2
51.6
52.0
52.4
52.8
53.1
53.5
53.9
54.3
54.7
55.1
55.5
55.9
56.3
56.7
57.1
57.5
57.9
58.3
58.7
59.1
59.4
59.8
Output (%)
60.2
60.6
61.0
61.4
61.8
62.2
62.6
63.0
63.4
63.8
64.2
64.6
65.0
65.4
65.7
66.1
66.5
66.9
67.3
67.7
68.1
68.5
68.9
69.3
69.7
70.1
70.5
70.9
71.3
71.7
72.0
72.4
72.8
73.2
73.6
74.0
74.4
74.8
75.2
75.6
76.0
76.4
76.8
77.2
77.6
78.0
78.3
78.7
79.1
79.5
79.9
Output (%)
80.3
80.7
81.1
81.5
81.9
82.3
82.7
83.1
83.5
83.9
84.3
84.6
85.0
85.4
85.8
86.2
86.6
87.0
87.4
87.8
88.2
88.6
89.0
89.4
89.8
90.2
90.6
90.9
91.3
91.7
92.1
92.5
92.9
93.3
93.7
94.1
94.5
94.9
95.3
95.7
96.1
96.5
96.9
97.2
97.6
98.0
98.4
98.8
99.2
99.6
100.0

EXT-0085-R00-12302020 (LTR) 15/19
STANDALONE TNW/DTW MODE
Use the following charts for selecting the fixed output levels for TNW and DTW. Minimum dimming level for TNW is 1%, levels 0-5*
will result in 1% intensity for TNW. When using DTW in Standalone mode switches 8-11 are ignored as CCT is not independently
adjustable in DTW, the selected intensity will determine the CCT according to Figure 7.
INTENSITY
Level Dip Setting Output (%)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
0.05*
0.16*
0.25*
0.39*
0.62*
0.99*
1.58
2.51
3.99
6.34
10.09
16.05
25.53
40.62
64.61
100.0
CCT
Level Dip Setting Color Temp (K)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
2700
2850
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
5200
5400
5700
100.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
0 1 2 3 4 5 6 8 9 10 11 12 13 14 157
Level
D.C. Output (%)
Figure 7: Intensity and CCT selection chart (LEFT), level and output chart (RIGHT)
Standalone TNW/DTW Chart Mode Switch 1-3 Switches 4-7 (Intensity) Switches 8-12 (CCT)
Fixed Output - TNW 1-1-0 X-X-X-X X-X-X-X-0
Fixed Output - DTW 1-1-0 X-X-X-X X-X-X-X-1
X = IGNORED

EXT-0085-R00-12302020 (LTR) 16/19
DYNAMIC TEST MODE
Dynamic test mode is used to check the system functionality. This mode will ignore control inputs and cycle through the output range.
* On = 1, O = 0
Dynamic test SCT mode:
Outputs operate in standard configuration with the output duty cycle of all 4 channels matching. Output duty cycle starts from 0% and
ramps linearly up to 100% output, then ramps back down to 0% and repeats indefinitely with a period of 5 seconds.
Time
Dimming
5s
100%
0%
0s
Time
Dimming
10s5s
100%
0%
0s
Warm White Cool White
Figure 8: SCT Dynamic test mode output range
Dynamic test TNW/DTW mode:
This test mode is only applicable for TNW and DTW TILEs. Output duty cycle starts with the WARM LEDs (TNW=2700K,
DTW=2200K) raising their intensity from 0% to 100% then decreasing to 0%. Next the COOL LEDs (TNW=5700K, DTW
=3500K) raise intensity from 0% to 100% then decrease to 0%. This cycle repeats indefinitely with a period of 10 seconds.
Figure 9: TNW/DTW Dynamic test mode output graph
Standalone SCT Mode Switches 1-3 Switches 4-12
Dynamic Dimming Level Test (SCT) 1-0-1 IGNORED
Dynamic Color Tune Test (TNW) 1-1-1 IGNORED
Dynamic Dim-to-Warm Test (DTW) 1-1-1 IGNORED

EXT-0085-R00-12302020 (LTR) 17/19
APPENDIX A: DIMMING VERSUS OUTPUT DUTY CYCLE FOR LOGARITHMIC AND LINEAR CURVE
APPENDIX B: DIMMING CURVES CASAMBI SCT MODE
DIMMING CURVE FOR LOG MODE
DIMMING CURVE FOR LIN MODE
100
90
80
70
60
50
40
30
20
10
0
DALI IEC Spec Log Output (%)
DALI IEC Spec Linear Output (%)
0 50 100 150 200 250 300
Dimming Level (8-bit)
Output Duty Cycle (%)
Linear Output (%)
Log Output (%)
DIMMING RESPONSE
DIMMING RESPONSE

EXT-0085-R00-12302020 (LTR) 18/19
APPENDIX C: DIMMING CURVES CASAMBI TNW MODE
DIMMING RESPONSE
COLOR TEMPERATURE RESPONSE

EXT-0085-R00-12302020 (LTR) 19/19
O +   
F +   
T +   
W cooledgelighting.com
PRODUCT SUPPORT
Contact Cooledge Technical Support at:
E [e-mail]
O +...
T +... (toll free - North America)
Cooledge Lighting Inc.
110-13551 Commerce Parkway
Richmond, BC V6V 2L1 Canada
Cooledge Lighting reserves the right to change
materials or modify the design of its product
without notification as part of the company’s
continuing product improvement program.
TROUBLESHOOTING
WARNING:
Each module treats the input controls available with the following priority:
1. Standalone (Fixed or Dynamic): If DIP Switch setting for one of these modes is selected, the module will ignore any other control input
(Casambi, 0-10V, DALI) and operate according to the settings of the operational mode selected
2. Wireless (Casambi): When the wireless chip is installed in the Control Module all other inputs (0-10V and DALI) are ignored even they are wired
3. DALI: If the control module receives a DALI input, it will operate according to the DALI commands it receives, and 0-10V input will be ignored
even it is wired
4. 0-10V: If the module has not installed Casambi card and no DALI control wired
CONTROLLER STATUS MODE LED STATUS LOAD BEHAVIOR
OFF (No Input Power) All OFF OFF
CASAMBI Control Input
Recognized
All except
Standalone Green Flashing Fast (8 Hz) Responsive to CASAMBI commands
Standalone Recognized Standalone Alternate Amber/Green
Slow (1 Hz) Responsive only to DIP switch setting
No Control Input (wireless
card missing) All Amber On Steady State Full ON
Input Over Voltage All Amber Flashing Slow (1Hz) OFF
Input Under Voltage All Amber Flashing Fast (8 Hz) OFF
Output Short Circuit V+ to V- All, and DIM
voltage V<9.5V
Red Flashing with
Intermittent Green
Load is OFF on shorted Channel
All loads of the unit, except the shorted one, are flashing
The rest of units in the installation remain responsive
to CASAMBI commands
Output Short Circuit V+ to V- All, and DIM
voltage V>9.5V
Red Flashing with
Intermittent Amber
Load is OFF on shorted Channel
All loads of the unit, except the shorted one, are flashing
The rest of units in the installation remain responsive
to CASAMBI commands
Output Short Circuit to V+
TNW/DTW
Dim Input
Control set to
V<9.5V
Red Flashing with
Intermittent Green
Load is OFF on shorted Side of TNW Channel
All other loads of the unit, except the shorted one, are flashing
The rest of units in the installation remain responsive
to CASAMBI commands
Output Short Circuit to V+
TNW/DTW
Dim Input
Control set to
V>9.5V
Red Flashing with
Intermittent Amber
Load is OFF on shorted Side of TNW Channel
All other loads of the unit, except the shorted one, are flashing
The rest of units in the installation remain responsive
to CASAMBI commands
Output Overload All Red Flashing
Overloaded channel dimmed and flashing at 1s constant rate
All other loads of the unit remain responsive to CASAMBI
commands