Cooper & Hunter CH-IK030RKE User manual

Thank you for choosing Cooper&Hunter air conditioner, please read this service manual
carefully before operation and retain it for future reference.
COMMERCIAL
ESERIES
Service manual
Air conditioners
Models:
CH-IF050RKE
CH-IF071RKE
CH-IF085RKE
CH-IF100RKE
CH-IF125RKE
CH-IF140RKE
CH-IF160RKE
CH-IU030RKE
CH-IU035RKE
CH-IU050RKE
CH-IU071RKE
CH-IU085RKE
CH-IU100RKE
CH-IU125RME
CH-IU140RME
CH-IU160RME
CH-IC030RKE
CH-IC035RKE
CH-IC050RKE
CH-IC071RKE
CH-IC085RKE
CH-IC100RKE
CH-IC125RKE
CH-IC140RKE
CH-IC160RKE
CH-ID030RKE
CH-ID035RKE
CH-ID050RKE
CH-ID071RKE
CH-ID085RKE
CH-ID100RKE
CH-ID125RKE
CH-ID140RKE
CH-ID160RKE
CH-IK030RKE
CH-IK035RKE

Models
< Outdoor Units >
< Indoor Units >
Ducted
CH-ID030RKE
CH-ID035RKE
CH-ID050RKE
CH-ID071RKE
CH-ID085RKE
CH-ID100RKE
CH-ID125RKE
CH-ID140RKE
CH-ID160RKE
Cassette
CH-IC030RKE
CH-IC035RKE
CH-IC050RKE
CH-IC071RKE
CH-IC085RKE
CH-IC100RKE
CH-IC125RKE
CH-IC140RKE
CH-IC160RKE
Ceiling & Floor
CH-IF050RKE
CH-IF071RKE
CH-IF085RKE
CH-IF100RKE
CH-IF125RKE
CH-IF140RKE
CH-IF160RKE
Console
CH-IF030RKE
CH-IF035RKE
CH-IU030RKE
CH-IU035RKE
CH-IU050RKE
CH-IU071RKE
CH-IU085RKE
CH-IU100RKE
CH-IU125RME
CH-IU140RME
CH-IU160RME
NOTE:
Heating function is not available for cooling only models.
Heat pump type

SAFETY SUMMARY
IMPORTANT NOTICE
●We pursue a policy of continuing improvement in design and performance of products. The right is
therefore reserved to vary specifications without notice.
●We cannot anticipate every possible circumstance that might involve a potential hazard.
●This air conditioner is designed for standard air conditioning only. Do not use this air conditioner for
other purposes such as drying clothes, refrigerating foods or for any other cooling or heating process.
Do not let the air-out face animals or plants, it might have an adverse effect on it.
●The installer and system specialist shall secure safety against leakage according to local regulations
or standards.
●Signal words (DANGER, WARNING and CAUTION) are used to identify levels of hazard seriousness.
Definitions for identifying hazard levels are provided below with their respective signal words.
●Installation should be performed by the dealer or another professional personnel. Improper installation
may cause water leakage, electrical shock, or fire.
●Do not perform installation work, refrigerant piping work, drain piping and electrical wiring connection
without referring to our installation manual. If the instructions are not followed, it may result in a water
leakage, electric shock or a fire.
●Use refrigerant R32 in the refrigerant cycle.
●Do not pour water into the indoor or outdoor unit. These products are equipped with electrical parts. If
poured, it will cause a serious electrical shock.
●Do not open the service cover or access panel for the indoor or outdoor units without turning OFF the
main power supply.
●Do not touch or adjust safety devices inside the indoor or outdoor units. If these devices are touched
or readjusted, it may cause a serious accident.
●Refrigerant leakage can cause difficulty with breathing due to insufficient air. Turn OFF the main
switch, extinguish any naked flames and contact your service contractor, if refrigerant leakage occurs.
●Do perform air-tight test. Do not charge oxygen, acetylene or other flammable and poisonous gases
into the refrigerant cycle when performing a leakage test or an air-tight test. These types of gases are
extremely dangerous and can cause an explosion. It is recommended that nitrogen be used for this
test.
●The installer and system specialist shall secure safety against refrigerant leakage according to local
regulations or standards.
●Use an ELB (Electric Leakage Breaker). In the event of a fault, there is danger of an electric shock or
a fire if it is not used.
Immediate hazards which WILL result in severe personal injury or death.
Hazards or unsafe practices which COULD result in severe personal injury
or death.
Hazards or unsafe practices which COULD result in minor personal injury or
product or property damage.
Useful information for operation and/or maintenance.
●Do not use any sprays such as insecticide, lacquer, hair spray or other flammable gases within
approximately one (1) meter from the system.

●If circuit breaker or fuse is often activated, stop the system and contact your service contractor.
●Check that the ground wire is securely connected. If the unit is not correctly grounded, it lead
electric shock.Do not connect the ground wiring to gas piping, water piping, lightning conductor or
ground wiring for telephone.
●Before performing any brazing work, check to ensure that there is no flammable material around
When using refrigerant be sure to wear leather gloves to prevent cold injuries.
●Protect the wires, electrical parts, etc. from rats or other small animals.
If not protected, rats may gnaw at unprotected parts and which may lead to a fire.
●Fix the cables securely. External forces on the terminals could lead to a fire.
●Install the air conditioner on a solid base that can support the unit weight. An inadequate base or
incomplete installation may cause injury in the event the unit falls off the base. Incomplete
connections or clamping may cause terminal overheating or fire.
●Make sure that the outdoor unit is not covered with snow or ice, before operation.
●Do not step or put any material on the product.
●Do not put any foreign material on the unit or inside the unit.
●It is recommended that the room be ventilated every 3 to 4 hours.
●The air conditioner may not work properly under the following circumstances.
The power transformer provides the same power or power as the air conditioner. The electrical
equipment is too close to the power supply of the air conditioner. With the sharp change of power
consumption and switching action, the power supply of the air conditioner will generate a large
induction surge voltage.
CHECKING PRODUCT RECEIVED
●Upon receiving this product, inspect it for any shipping damage. Claims for damage, either apparent
or concealed, should be filed immediately with the shipping company.
●Check the model number, electrical characteristics (power supply, voltage and frequency) and
accessories to determine if they are correct.
The standard utilization of the unit shall be explained in these instructions.
Therefore, the utilization of the unit other than those indicated in these instructions is not
recommended.
Please contact your local agent, as the occasion arises.
The figures in this manual are based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner you have selected.

DC-InverterAir Conditioner Technical & Service Manual
Table of Contents
1. General . .................................................................................................................................................1
1.1 Features. .......................................................................................................................................1
1.2 Product lineup. ..............................................................................................................................5
1.3 Nomenclature . ..............................................................................................................................5
1.4 Unit installation . ............................................................................................................................6
1.5 Working range. ..............................................................................................................................6
1.6 Product appearance . ....................................................................................................................7
2. Specifications. ......................................................................................................................................14
2.1 Duct type. ....................................................................................................................................14
2.2 Cassette type. .............................................................................................................................18
2.3 Ceiling & Floor type ....................................................................................................................22
2.4 Console type. ..............................................................................................................................26
3. Outlines and dimensions. .....................................................................................................................28
3.1 Indoor units . ................................................................................................................................28
3.2 Outdoor units . .............................................................................................................................35
4. Electrical data . ....................................................................................................................................41
5. Capacities and selection data..............................................................................................................42
5.1 Capacity characteristic charts.....................................................................................................36
5.2 Piping length correction factor ....................................................................................................61
5.3 Correction factors according to defrosting operation..................................................................63
6. Sound pressure data . ..........................................................................................................................64
7. Air flow distribution. ..............................................................................................................................75
7.1 Cassette type. .............................................................................................................................75
7.2 Ceiling & Floor type ....................................................................................................................84
8. ESP (External static pressure) chart (Duct type).................................................................................98
9. Refrigerant cycle ................................................................................................................................107
10. Fresh air intake function. ..................................................................................................................113
11. Wiring diagram. ................................................................................................................................115
11.1 Electrical wiring diagrams .......................................................................................................115
11.2 Control board picture . .............................................................................................................125
11.3 Common wiring. ......................................................................................................................130
12. Field setting. ....................................................................................................................................132
12.1 Indoor unit air flow DIP switch ................................................................................................132
12.2 Outdoor unit DIP switch ..........................................................................................................133
12.3 ESP setting . ............................................................................................................................134
12.4 Indoor unit parameter revision ................................................................................................135
12.5 Running parameter query.......................................................................................................137
12.6 Instructions for the function setting of access control, fire protection .....................................140
13. Piping work and refrigerant charge ..................................................................................................142
13.1 MAX. length allowed . ..............................................................................................................142
13.2 Oil trap . ...................................................................................................................................142
13.3 Air tight test. ............................................................................................................................143
13.4 Additional refrigerant charge...................................................................................................144
14. Control mode . ..................................................................................................................................145
14.1 Indoor unit mode control . .......................................................................................................145
14.2 Outdoor unit mode control ......................................................................................................148
15. Sensor parameter . ...........................................................................................................................149
16. Troubleshooting................................................................................................................................155
16.1 Trouble guide . .........................................................................................................................155
16.2 Fault codes . ............................................................................................................................161
17. Checking components . ...................................................................................................................170
17.1 Check refrigerant system........................................................................................................170
17.2 Check parts unit . ....................................................................................................................172
18. Disassembly and assembly for compressor and motor ...................................................................177
19. Control logic description. ..................................................................................................................194

1
1. .G GE EN NE ER RA AL L
1. General
1.1 Features
Duct Type Air Conditioner
Features
 Save Installation Space
The indoor unit can be installed inside the ceiling conveniently.
 Optional Static Pressure
Optional ESP, a variety of optional installation methods.
 24-hour Timer ON and OFF
This Timer can be set to automatically turn the unit on or off within a 24-hour period.
 Mute Operation
The excellent fan design enables smooth airflow with minimum noise.
 Meeting Various Installation Requirements
The back-air-inlet type should be adopted according to the actual installation
space. The unit is also installed with down-air-inlet type and the noise will
increase by 5-6dB.
 Auto re-start from Power Break
When the power supply is recovered after power break, all presets are still effective
and the air-conditioner will run according to the previous setting.
 Fault Self-diagnose Function
When there is a problem in the air-conditioner , the microcomputer could diagnose
the faults, which can be read from the display and is convenient for maintenance.
1

1
1. .G GE EN NE ER RA AL L
Cassette Type Air Conditioner
Features
 Save Installation Space
The indoor unit can be installed inside the ceiling conveniently.
 24-hour Timer ON and OFF
This Timer can be set to automatically turn the unit on or off within a 24-hour period.
 Mute Operation
The excellent fan design enables smooth airflow with minimum noise.
 Auto re-start from Power Break
When the power supply is recovered after power break, all presets are still effective
and the air-conditioner will run according to the previous setting.
 Fault Self-diagnose Function
When there is a problem in the air-conditioner, the microcomputer can diagnose the faults,
which can be read from the display and is convenient for maintenance.
2

1
1. .G GE EN NE ER RA AL L
Ceiling & Floor Air Conditioner
Features
Save Installation Space
The indoor unit’s height is only 230mm, can be installed inside the ceiling conveniently.
Flexible Installation Options
According to the actual installation space, the indoor unit can be installed in the ceiling
or on the floor. One unit, two installation method.
24-hour Timer ON and OFF
This Timer can be set to automatically turn the unit on or off within a 24-hour period.
Mute Operation
The excellent fan design enables smooth airflow with minimum noise.
Various Refrigerant Pipe Connect Methods
The refrigerant pipe can be connected from 3 different directions (rear, right, or top).
Auto re-start from Power Break
When the power supply is recovered after power break, all presets are still effective and the
air-conditioner will run according to the previous setting.
Fault Self-diagnose Function
When there is a problem in the air-conditioner, the microcomputer could diagnose the faults,
which can be read from the display and is convenient for maintenance.
3

1
1. .G GE EN NE ER RA AL L
Console Type Air Conditioner
Features
Flexible Installation Options
According to the actual installation space, the indoor unit can
be installed in any of the three styles. One unit, three
installation methods.
24-hour Timer ON and OFF
This Timer can be set to automatically turn the unit on or off within a 24-hour period.
Mute Operation
The excellent fan enables smooth airflow with minimum noise.
Various Refrigerant Pipe Connect Methods
The refrigerant pipe can be connected from 6 different directions. More methods, more
conveniently.
Auto Re-start from Power Break
When the power supply is recovered after power break, all presets are still effective and
the air-conditioner will run according to the previous setting.
Fault Self-diagnose Function
When there is a problem in the air-conditioner, the microcomputer can diagnose the faults,
which can be read from the display and is convenient for maintenance.
4

1
1. .G GE EN NE ER RA AL L
1.2 Product lineup
Model
(KW*10)
Type
025 035 050 071 085 100 125 140 160
Duct ● ● ●
Cassette ● ● ● ●
Ceiling & Floor ● ● ● ●
Console ● ●
1.3 Nomenclature
●--- available model
--- in development
●
●
●
●
●
●
●
● ● ●
●
5
● ● ●
CH-ID035RKE
Cooper&Hunter
I: DC-Invert Heat Pump Type
Type: D-Duct Type, C-Cassette Type, F-Ceiling
& Floor Type, K-Console Type, U-Outdoor Unit
Refrigerant type: N-R410A, R-R32
Model: 035 (3.5KW*10)
Series
Power supply: K-220V, M-380V 50Hz

1
1. .G GE EN NE ER RA AL L
1.4 Unit installation
1:1 system is the only compatible combination.
(Only one indoor unit can be connected with 1 outdoor unit.)
1.5 Working range
Power Supply
Working Voltage
Voltage Imbalance Within a 3% deviation from each voltage at the main terminal of outdoor unit
Starting Voltage Higher than 85% of the Rated Voltage
Operating temperature range
This air conditioner is designed for the following outdoor operating temperatures.
Type Mode Outdoor operating temperature (℃)
maximum minimum
DC-Inverter Split Air
Conditioner
(Heat pump type)
Cooling Operation 48 -15
Heating Operation 24 -15
Storage condition:
Temperature: -25~60℃
Humidity: 30%~80%
176V ~ 264V(030~100), 342V ~ 438V(125~160K)
6

1. GENERAL
Model
(KW*10) Indoor Unit Outdoor Unit
030
035
050
071
085
100
1.6 Product appearance
Duct type
7

1. GENERAL
Model
(KW*10) Indoor Unit Outdoor Unit
125
140/160
Cassette type
Model
(KW*10) Indoor Unit Outdoor Unit
030
035/050
071/085
100
8

1. GENERAL
Model
(KW*10) Indoor Unit Outdoor Unit
125
140/160
Ceiling & Floor type
Model
(KW*10) Indoor Unit Outdoor Unit
050
071
085
100
9

1. GENERAL
Model
(KW*10) Indoor Unit Outdoor Unit
125
140/160
Console type
Model
(KW*10) Indoor Unit Outdoor Unit
030
035
10

1. GENERAL
Display panel
Duct Type
2
1
3
4
5
7
Ceiling & Floor type
1
7
2
3
5 4
6
Cassette Type
56
4
62
1
13
754
2
37
6
2
1
5 4 3
7
11

1. GENERAL
The figures in this manual are based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner you have selected.
Description
1 Run indicator (Red)
It lights on during operation. It lights off during SLEEP mode.
2 Emergency switch
The filter clean indicator is reset when the switch is pressed. The unit will be
started or stopped when the switch is pressed. The unit will be operated in forced
cooling mode if press the switch continuously for more than 5s, the unit will operate
in cooling mode.
3 Timer indicator (Green)
It lights on when timer is in use. It lights off when timer finishes.
4 Filter clean (Yellow)
It lights on when the filter should be cleaned.
5 Defrost indicator (Green)
It lights on during defrosting It lights off when defrosting is finished.
6 Buzzer
It beeps when the signal from remote controller is received.
7 Infrared receiver
Receives signal from the remote controller.
12

1
1. .G GE EN NE ER RA AL L
Console type
Display set temperature.
It shows FC after setting hours of usage as reminder to clean the filter.(optional)
After filter cleaning press the filter reset button located on the indoor unit
behind the front panel in order to reset the display.
It displays set humidity in humidity mode.(optional)
Temperature indicator
Timer indicator
It lights up during set time.
Sleep indicator
It lights up in sleep mode and will off
after 10 seconds.
Running indicator
It lights up when the AC is running.
13

2. SPECIFICATIONS
2. Specifications
2.1 Duct type
Indoor model CH-ID030RKE CH-ID035RKE CH-ID050RKE CH-ID071RKE CH-ID085RKE CH-ID100RKE CH-ID125RKE CH-ID140RKE CH-ID160RKE
Outdoor model CH-IU030RKE CH-IU035RKE CH-IU050RKE CH-IU071RKE CH-IU085RKE CH-IU100RKE CH-IU125RMECH-IU140RMECH-IU160RME
Electric
parameter
Power supply Indoor V-ph-Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50
Power supply Outdoor V-ph-Hz 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 220-240/1/50 380-415/3/50 380-415/3/50 380-415/3/50
Input
consumption
Max. W 1490 1800 2000 4100 4100 5100 6400 7200 7800
Input current
Max.
A
6.5
8.1
10.7
18.1
18.0
22.5
11.6
12.6
13.1
Seasonal
efficiency
Cooling
Pdesignc W 2900 3520 5300 7200 8800 10500 12500 14400 17500
SEER W/W 6.27 6.30 6.40 6.43 6.20 6.13 —— —— ——
η
s,c
%
-
-
-
-
-
-
248
237
233
Energy Efficiency
Class
— A++ A++ A++ A++ A++ A++ —— —— ——
Annual energy
consumption
kWh/a 168 197 293 395 499 613 761 849 943
Heating
(Average
Season)
Pdesignh W 2400 3520 4400 6000 6500 8600 9500 12400 11000
SCOP W/W 4.23 4.01 4.0 4.18 4.00 4.00 —— —— ——
η
s,c
%
-
-
-
-
-
-
145
146
141
Energy Efficiency
Class
— A+ A+ A+ A+ A+ A+ —— —— ——
Annual energy
consumption
kWh/a 879 1214 1584 2007 2313 3010 3674 4694 4205
Tbiv ℃ -7 -7 -7 -7 -7 -7 -7 -7 -7
Tol ℃ -10 -10 -10 -10 -10 -10 -10 -10 -10
Cooling
Capacity
Rated
Btu/h
9895
12010
18084
25145
30025
35836
42650
49133 59710
Rated W 2900 3520 5300 7200 8800 10500 12500 14400 17500
Min - Max W 1750~3400 1720~3850 2600~5600 2450~7850 4000~9500 3500~11000 3300~13200 3200~16000 3300~18500
Input
Rated
W
828
1005
1610
2230
2670
3750
4220
4780
6600
Current Rated A 3.6 4.5 7.4 10.4 11.6 16.5 7.4 8.7 12.5
EER Rated W/W 3.50 3.50 3.29 3.23 3.30 2.8 2.96 3.01 2.65
Heating
Capacity
Rated
Btu/h
10577
12965
19790
28651
30708
39249
45734
59044
63140
Rated W 3100 3800 5800 7900 9000 11500 13400 17300 18500
Min - Max W 1750-3740 1770~4220 3000~6100 2200~8700 3500~9400 3320~12000 3000~14600 3400~18500 3000~19500
Input Rated W 780 1000 1540 2130 2400 3380 4070 4670 6100
Current Rated A 3.6 4.5 6.8 10.0 10.5 14.9 7.3 8.4 11.6
COP Rated W/W 3.97 3.80 3.77 3.71 3.75 3.4 3.29 3.70 3.03
Indoor fan
motor
Model —
SIC-68CVL-F140-
1
SIC-68CVL-F140-
1
SIC-68CVL-F160-
2
SIC-101CW-F121
0
SIC-101CW-F121
0
SIC-101CW-F125
0-4
SIC-101CW-F125
0
SIC-101CW-F125
0
Qty — 1 1 1 1 1 1 1 1
Output W 40 40 60 210 210 250 250 250
14
SIC-68CVL-F160-
2
1
60

2. SPECIFICATIONS
Indoor model
Outdoor model
Capacitor uF / / / / / / / / /
Speed(Hi/Med/Lo) r/min 690/590/510 790/690/590 860/760/660 950/800/670 900/800/640 1050/980/900 910/810/710 1100/1000/900 1100/1000/900
Indoor coil
Number of rows — 3 3 3 3 3 3 3 3 3
Tube pitch(a)xrow pitch(b) mm 21x13.6 21x13.6 21x13.6 21x13.6 21x13.6 21x13.6 21x18.19 21×18.19 21×18.19
Fin spacing mm 1.6 1.6 1.6 1.6 1.6 1.6 1.4 1.4 1.4
Fin type —
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Hydrophilic
aluminium
Tube outside dia.and type mm
Φ7,innergroove
tube
Φ7,innergroove
tube
Ф7,innergroove
tube
Ф7,innergroove
tube
Ф7, innergroove
tube
Ф7, innergroove
tube
Ф7, innergroove
tube
Ф7, innergroove
tube
Ф7, innergroove
tube
Coil length x height x width
mm
732×210×40.8 1002×210×40.8 1002×210×40.8
960x336x40.8
960x336x40.8
1100x378x54.6
1100×378×54.6 1100×378×54.6
Number of circuits — 3 3 3 6 6 6 9 9 9
Indoor unit
Dimension WxHxD mm 910×190×447 910×190×447 1180×190×447 1180×190×447 1140x268x720 1140x268x720 1300x350x800 1300x350x800 1300x350x800
Packing
WxHxD
mm
1080×285×565 1080×285×565 1350×285×565 1350×285×565 1330×360×870 1330×360×870 1550×410×940 1550×410×940 1550×410×940
Weight Net/Gross kg 18.0/21.5 18/21.5 22.5/26 24/27.5 37.5/44.5 37.5/44.5 51/60 51/60 51/60
Air Volume Hi/Med/Lo m
3
/h 520/420/350 600/484/400 900/770/650 1000/810/650 1450/1120/900 1800/1600/1400 1750/1500/1300 2400/2200/1900 2400/2200/1900
Hi/Med/Lo
CFM
309/250/208
338/285/235
536/458/327
588/476/382
853/659/529
853/735/618
1029/882/765
1412/1294/1118
Sound Level
(SPL)
Hi/Med/Lo dB(A) 32/29/26 36/33/30 41/37/33 38/34/31 42/39/35 50/47/43 42/39/36 48/45/42 49/46/43
Sound Level
(PWL)
Hi dB(A) 47 50 57 58 59 64 67 73 73
External Static
Pressure
Rated Pa 0 0 0 40 47 37 50 50 50
Range Pa 0~50 0~50 0~50 0~40 0~120 0~120 0~120 0~120 0~120
Controller
Type
—
Wired
Wired
Wired
Wired
Wired
Wired
Wired
Wired
Wired
Model —
YXE-A02U(E) or
others
YXE-A02U(E) or
others
YXE-A02U(E) or
others
YXE-A02U(E) or
others
YXE-C01U(E)/YX
E-A02U(E)/
YXE-A02U(E) or
others
YXE-A02U(E) or
others
YXE-A02U(E) or
others
YXE-A02U(E) or
others
Drainage water pipe diameter mm ODΦ32 ODΦ32 ODΦ32 ODΦ32 ODΦ32 ODΦ32 ODΦ32 ODΦ32 ODΦ32
Drain pump —
Air filter
—
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Throttle type — —— —— —— —— —— —— —— —— ——
Booster heater kW —— —— —— —— —— —— —— —— ——
Qty’per 20’ /40’ /40'HQ — 160/352/396 160/352/396 128/264/297 168/264/297 60/126/147 35/75/90 35/75/90 35/75/90 35/75/90
Design pressure H/L MPa 4.3/1.6 4.3/1.6 4.3/1.6 4.3/1.6 4.3/1.6 4.3/1.6 4.3/1.6 4.3/1.6
Room
temperature
Setting
temperature
range
Cooling ℃ 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30
Heating ℃ 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30 16 - 30
Compressor
Model — KSK103D59UFZ
KSN108D43UFZ
A
KTN150D42UFZ KTM240D57UMT KTM240D57UMT KTF310D43UMT KTF310D43UMT KTF400D64UMT KTQ420D1UMU
Type
—
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
ROTARY
Brand — GMCC GMCC GMCC GMCC GMCC GMCC GMCC GMCC GMCC
Capacity
Btu/h
11055
11635
15968
26323 26323
34163
34154
34470
46755.36
732×210×40.8
15
4.3/1.6
Optional Optional Optional Optional Optional Optional Optional Optional Optional
1412/1294/1118
CH-ID030RKE CH-ID035RKE CH-ID050RKE CH-ID071RKE CH-ID085RKE CH-ID100RKE CH-ID125RKE CH-ID140RKE CH-ID160RKE
CH-IU030RKE CH-IU035RKE CH-IU050RKE CH-IU071RKE CH-IU085RKE CH-IU100RKE CH-IU125RMECH-IU140RMECH-IU160RME