
Raised Toilet Seat w/handles 10446 Instructions for Use
Please read and retain these instructions for future reference v002:12/07/16
ASSEMBLY INSTRUCTIONS:
1. Remove or lift up your current toilet seat and lid.
2. Fix the handle (A) to the seat(B).
3. Slide one of the plastic screw covers (D) down over one of the three pre-inserted plastic
brackets on the bottom of the seat, making sure that the bracket sits flat.
4. Repeat step 3 on the remaining 2 pre-inserted plastic brackets on the bottom of the seat.
5. Insert the metal fixing bracket with plastic screw (E) into the holes in the back of the pre-
inserted plastic brackets on the bottom of the seat. Ensuring that the plastic screw lines up
with the round hole.
6. Repeat step 5 on the remaining pre-inserted plastic brackets on the back of the seat.
7. Sit the item on top of your toilet basin and position so it sits straight. Tighten the 3 plastic
screws (E) on the base of the seat, until the item sits securely and firmly on top of your toilet
basin.
WARNINGS / CAUTIONS:
Do not use any caustic or abrasive cleaning agents or sponges. These can damage the surface.
Keep the packing material away from children (risk of suffocation).
Keep children away from the toilet aid. They could attempt to stand on it or pull themselves up
and fall over.
Ensure that another person is close by. This person can help you with sitting down or standing
up if necessary.
The toilet seat supports maximum weight of 100kg.
The handle is designed to assist your natural motion, it can’t support your full body weight!
Inspect the toilet seat before use and ensure that it is fastened securely.
DISPOSAL:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
local recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household waste
recycling centre.