Copernicus CS700-CLR User manual

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
Assembly Guide
Loop Hook (2) Chart Hook (2)
Knob (2) Telescopic Extensions (2)
Left (1) & Right (1)
Clear Acrylic Dry-Erase
Panel Frame (1)
Upper Leg (2)
Book Ledge (1)
Lower Leg (2)
Open Tub (2)
Bottom Stretcher (2)
2” Twin Wheel Caster (4)
CS700-CLR
Clear Dry-Erase Chart Stand

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
Before beginning, you should have:
Contents - Box 1
In Box 1
Hardware
Actual Size
ClearAcrylic Dry-Erase Panel Frame
1x
Lower Leg
2x
Upper Leg
2x
Bottom Stretcher
2x
TelescopingArms
2x
Loop Hook
2x
A M6 x 45mm
4x
B M6 x 35mm
8x
C M6 Hex Nut
4x
D Lock Washer
12x
Knob
(Not to Scale)
2x
Allen Key
(Not to Scale)
1x
Contents - Box 2
Chart Hook
2x
2” Twin Wheel Caster
4x
Open Tub
2x
(CC4068)
Book Ledge
1x
Additional tools required:
Adjustable wrench Rubber Mallet
CS700-CLR
Clear Dry-Erase Chart Stand - Parts
10 lbs Weight Limit

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
2 Person
Watch for These Helpful Symbols
 This symbol denotes a 2 Person Task. For safety, please ensure that there are two people
working on steps displaying this symbol
 Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done correctly.
 The Star symbol highlights an advisory note
Before You Begin
 Layout and identify all of the included parts
 The hardware has been packed by step
 Read the assembly instructions over once to familiarize yourself with them
 Please note that in its unassembled state, this product contains parts that can be a hazard
to small children; it should be assembled by an adult.
After Assembly; Before Use
 Remove the plastic film from the acrylic panel before writing on it
As You Assemble the Unit
 Follow the steps in sequence
 Before beginning each step, find the part(s) that you need for that step
 Pay attention to the labeling on the parts, they are there to help direct you at certain stages
 The title of each step states what you will be doing. Review the text and the pictures as you
build the unit.
CS700-CLR
Tips for Assembly - Using this Manual
Time
Life
Frame & Tub
Warranty
Y2
ear
Warranty
Acrylic

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
A
D
Install 2” Casters
Press Casters firmly into the Base:
Casters will click into place
If necessary, tap the caster in
using a rubber mallet.
Build x 2
2
Actual Size:
A
M6 x 45mm
x 4
C
M6 Hex Nut
x 4
D
Lock Washer
x 4
You will need: (Not toScale)
Upper Leg
2x
Bolt Lower Legs To Upper Legs
Hole indents on Upper Leg
should face same side as Lower Leg.
C
Build x 2
1
Actual Size:
You will need: (Not toScale)
2” Twin Wheel Caster
x 4
Lower Leg
2x

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
Install Clear Acrylic Dry-Erase Panel
Frame Onto Base
Select your panel height
Junior/intermediate - higher position
Early childhood/primary - lower position
D B
B DHole indents
should face
outside of the unit.
4
Actual Size:
B
M6 x 35mm
x 4
D
Lock Washer
x 4
You will need: (Not toScale)
3
Actual Size:
B
M6 x 35mm
x 4
D
Lock Washer
x 4
You will need: (Not toScale)
Bottom Stretcher
2x
Install Stretchers
D B
D B
B
D
B
D
Hole indents should face
outside of the unit.

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
Install Telescoping Extensions
Actual Size:
6
You will need: (Not to Scale)
Install Premium Book Ledge
Book Ledge
1x
5
Actual Size:
You will need: (Not toScale)
Knob
2x
TelescopingArms
2x

CS700-CLR - VersionA - Released September 22, 2020 - Copernicus Educational Products Inc.
Install Loop Hooks & Chart Hooks
Remove Protective Film from Panel &
Install Open Tubs
7
Actual Size:
You will need: (Not toScale)
Loop Hook
2x
Chart Hook
2x
To avoid scratching the
paint place an empty
plastic bag over the frame,
install hooks, then remove
8
Actual Size:
You will need: (Not toScale)
Open Tub
2x
10 lbs Weight Limit