Echogear EGAV-SSBTV1 User manual

#YourGearUpgraded
SoundBar Mount
Model EGAV-SSBTV 1
INSTRUCTION MANUAL

5
Phillips Screwdriver
Level
3rd Party Certified
TV stand or Wall Mount*
*The TV mount styles illustrated
will vary, though the install
procedures are the same.
Grab Your Tools
3/16 in.
Hex Key
"Give it back
to Phil when
you finish"
TOY SURPRISE
Inside Every Box
H1
FREE

6
Stuff for STEP 1
Soundbar
Bracket
Soundbar
Support
Fender
Washer
Keyhole
Screw
Keyhole
Nut
qty. 2
qty. 2
qty. 2
qty. 2
qty. 2
NOTE: Not all hardware included will be used.
WARNING: DON'T FEED TO CHILDREN —This product contains small items
that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the
damaged item to your dealer; contact Customer Service. Never use damaged parts!
What’s in the box ... What’s IN THE boooooxx
01
02
03
04
05

7
M4 x 16mm
M5 x 16mm
M4 x 10mm
M5 x 10mm
1/4-20 x 3/8”M6 x 16mm
More Stuff for STEP 1 Stuff for STEP 3
Mount Spacer
Soundbar Screws Soundbar
Washers
M4 / M5
Washer
M6 / M8
Washer
qty. 2 of 6
qty. 2
qty. 2 each
06 07
08
M4
M5
1/4-20M6

8
More Stuff for STEP 3
M4 x 16mm
M6 x 16mm
M8 x 20mm
M4 x 40mm
M6 x 40mm
M8 x 40mm
M8 x 55mm
22mm
TV Spacer
2.5mm
5mm
M4 / M5
Washer
M6 / M8
Washer
qty. 4
qty. 4 each
qty. 4 of 6
TV Interface Screws
M4
M6
M8
Washers Spacers
09
10 11

9
Look at the mounting holes
on the back or bottom of your
soundbar to determine your
install method A, B or C.
OPTION B: Back-mount Holes with KEY HOLE SLOTS
OPTION A: Back-mount Holes with THREADED INSERTS
OPTION C: Bottom-mount Holes
STEP 1
Install Brackets on Your Soundbar
(PAGE 12)
(PAGE 10)
(PAGE 14)
C
A, B

10
Back-mount Holes with THREADED INSERTS
OPTION A :
IMPORTANT: If soundbar brackets 01 do not rest flat on your
soundbar surface, use fender washers 03 as shown.
03
M4
Only one screw size 06
fits your Soundbar.
M6
M8

11
Bottom of Soundbar
01
06
07

12
Back-mount Holes with KEY HOLE SLOTS
OPTION B :
IMPORTANT: If soundbar brackets 01 do not rest flat on your
soundbar surface, use fender washers 03 as shown.
03
05
04

13
01
Bottom of Soundbar

14
Bottom-mount Holes
OPTION C :
01
02
05

15
06
07
02

16
Prep Your TV (if mounted on a wall or stand)
STEP 2.1
STEP 2 Position your soundbar
CAUTION: Follow your TV mount’s manual for
instructions on how to safely remove your TV and TV bracket.

17
Adjust Soundbar to Your TV (VESA) Hole Pattern
STEP 2.2
TV Hole
Pattern

18

19
NOTE: Position the soundbar brackets 01 as vertically as possible.
01
01

20
STEP 3 Install Your Soundbar to Your TV
M4
TV Screw Diameter
3.1
Only one screw size 09 fits your TV.
M6
M8
CAUTION: Verify adequate thread engagement
with your screw 09 , washer 10 , spacer 11
combination AND TV/sound bar brackets.
Too short will
not hold your TV.
Too long will
damage your TV.
NOTE:
If your TV
included inset
spacers or
adapters, use
them UNDER
the mount
hardware.

21
SPACER NEEDED
b
NO SPACER
a
TV Screw Length
3.2
Flat Back TV
[TV brackets lay flat on your TV]
Flat Back TV
with Extra Space Needed
[for deep inset holes or cable interference]
Rounded or Irregular Back TV
[TV brackets NOT resting flat on your TV]
GO TO PAGE 22 GO TO PAGE 23 GO TO PAGE 23
CAUTION: Verify adequate thread engagement
with your screw 09 , washer 10 , spacer 11
combination AND TV/sound bar brackets.

22
Side View
08
09
10
01
08
09
10
01
NO SPACER
a
Asssemmmbllllle (No Spacer)
3.3a

23
Side View
08
11
11
09
10
01
09
10
08
01
11
SPACER NEEDED
b
Alternate
Spacer setups
11
Asssemmmbllllle (Spacer Needed)
3.3b