ITS Telecom EKSELANS R6UD User manual

Packaging List
Item List of Accessaries Packaging
1. Top panel - 1 pc
2. Rear panel - 1 pc
3. Side panel - 2 pcs
Assembly Hardwares Kits:
Tips: Check the quantities of the items before assembly
01
User Hardwares Kits:
(M6*12 screw & M6 cage nut)
R6UD/R9UD Wall-mounted Cabinet Assembly Manual
5. Vertical mounting rail - 2 pcs
6. Front door - 1 pc
U Capacity ≤12U, 12 sets cage nuts.
•M5*12 screw - 12pcs
•M5 self-tapping screw - 4pcs
• Front door lock - 1 set
4. Bottom panel - 1 pc
• Front door hinge - 2 sets
•Rubber plug - 2 pcs
• M6*50 expansion bolt - 4 pcs
Installation of Accesaries:
M5*8
self-tapping screw Front door lock Front door hinge
Rubber plug
M6*50
expansion bolt M6*12 screw M6 cage nut
1
2
3
4
5
6
M5*12 screw

Installation
02
Step 1
At first use the rear panel of the cabinet as a template and mark it by putting it on the
position where you will attach it to the wall. Drill and mount the dowels.
Step 3
Mount the side panels on the bottom panel with two pieces of M5x12 screws each.
Step 4
Mount the top panel to the rear and side panels with two pieces of M5x12 screws each.
Step 2
Mount the rear panel on the bottom panel with two pieces of M5x12 screws each.
Step 1 Step 2 Step 3
Step 4Step 5Step 6
Step 7 Step 8
Step 5
Mount the vertical mounting rail to the side panels with two pieces of M5x8 self-tapping
Step 6
Attach the hinges and lock to the glass door in a way so that the gaskets will stand in the
middle. Tighten the screws.
Step 7
Loosen the upper hinge and place the upper and lower hinges to the frame then tighten it
again.
Step 8
Take the rubber plugs and put them in the holes of the side panel which is on the lock side.
screws each.