Core Insight PLT003 User manual

PLT003 User Manual
Specifications, device installation, compliance and safety information
Updated: 2022-10-05
CONFIDENTIAL
All rights reserved. No part of this document may be re produced by any means whatsoever without the prior permission
of Core Transport Technologies Limited. Although Core Transport Technologies has taken reasonable care in the
preparation of this document; Core Transport Technologies accepts no liability whatsoever of whatsoever nature for any
loss or expense incurred due to reliance on or use of this document.
This document contains confidential information that is the property of Core Transport Technologies Limited. All use,
disclosure and/or reproduction not specifically authorised by Core Transport Technologies is prohibited. All names are
trademarks of their respective holders.

2
Table Of Contents
Revision History...................................................................................................................................3
Introduction ..........................................................................................................................................4
Specifications.......................................................................................................................................5
Compliance...........................................................................................................................................6
Manufacturer ...................................................................................................................................6
Markings ...........................................................................................................................................6
FCC.....................................................................................................................................................7
CE: Radio Equipment Directive (RED)........................................................................................7
UK: Radio Equipment Regulations (RER) ..................................................................................8
Safety.................................................................................................................................................8
PLT003 ..................................................................................................................................................9
Operating Instructions ...................................................................................................................9
Usage.................................................................................................................................................9

3
Revision History
Name
Date
Description
Version
RORIE
2022/01/18
Create document
1.0
RORIE
2022/02/01
Compliance section
1.1
RORIE
2022/02/02
Specifications
1.2
RORIE
2022/02/15
Add FCC ID
1.3
RORIE
2022/06/29
CE, UK, Safety info, instructions
1.4
RORIE
2022/07/01
RF transmit power: 1.8 dBm EIRP
1.5
RORIE
2022/10/05
Specs: -20˚C to +40˚C, IPX0 rating
1.6

4
Introduction
The PLT003 COREInsight® BLE Beacon tag is an active BLE beacon which utilises the Nordic nRF5810
module encased in a housing. This document explains how to use the PLT003 tag in a production
setting. The PLT003 tag advertises at an optimal interval of 7 times every 60seconds. The beacon
message is sent on the advertisement channels for BLE: 37 (2402 MHz), 38 (2426 MHz) and 39 (2480
MHz).
The tag has a Theoretical lifetime of 5 years.

5
Specifications
FCC ID
2A4F8-PLT003
RF specification operating frequency
2402 MHz (low), 2426 MHz (medium), 2480 MHz (high)
Type of modulation
GFSK
RF transmit power
1.8 dBm EIRP
Number of channels
3 channels
Antenna type
Pillar
Antenna gain
-0.4dBi
Specialty
Bluetooth Low Energy
Function
Bluetooth Low Energy
Power supply
N/A
Power cord
N/A
Battery
Three CR1632 lithium metal cell batteries rated at
140mAh each. Total 420mAh
Size:
3.7” x .76” x .35” (94.2mm x 19.2mm x 9mm)
Lifetime
5 years
Temperature Range:
-20˚C to +40˚C
IP Rating
IPX0
Weight
15 grams
Bluetooth Sensitivity:
-95dBm
Transportation:
Meets IATA Dangerous Goods Regulations 2015-2016
Edition (UN3091) Exemption Requirements PI 970
Section 2. Less than 4 lithium metal cells encased in
equipment. No declaration required.
Power Consumption - Max:
<7.6mA
Power Consumption - Sleep:
3 uA

6
Compliance
Manufacturer
Descartes Systems Group Inc.
Address: 105 Trafalgar Street, Floor 2, 7011, Nelson, New Zealand
Telephone number: [phone] (New Zealand)
E-Mail address: [e-mail]
Markings
Rear side of the device shows the CE, UKCA, FCC ID, model number and serial number. Front side of
the device also has the serial number and a QR code to read the serial number. This information can
be used to derive the manufacturing batch number.

7
FCC
FCC covers certification regulations for the United States of America.
Per FCC 15.19(a)(3) and (a)(4): This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation.
Per FCC 15.21: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Our beacon device falls under FCC rules part 15.247 as it transmits within 2400-2483.5 MHz.
CE: Radio Equipment Directive (RED)
CE covers certification regulations for the European Economic Area (EEA), Turkey and countries that
are part of the EU 's single market. This includes EU countries, Iceland, Liechtenstein, Norway and
Switzerland.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Radio Equipment Directive 2014/53/EU
RoHS 2011/65/EU
The following harmonised standards and technical specifications have been applied:
ETSI EN 300 328 V2.2.2:2019-07
ETSI EN 301 489-1 v2.2.3:2019-11
ETSI EN 301 489-17 V3.2.4:2020-09
EN IEC 62311
EN IEC 61326-1:2021
EN 60950-1:2005/A2:2013

8
UKCA: Radio Equipment Regulations (RER)
UKCA covers certification regulations for Great Britain. This includes England, Wales and Scotland.
The object of the Declaration described above is in conformity with the following United Kingdom
Regulations:
Radio Equipment Regulations 2017 (SI 2017 No. 1206, as amended)
The following designated standards have been applied:
ETSI EN 300 328 V2.2.2:2019-07
EN IEC 62311
ETSI EN 301 489-1 v2.2.3:2019-11
EN IEC 61326-1:2021
ETSI EN 301 489-17 V3.2.4:2020-09
EN 62368-1:2014
EN 60950-1:2005/A2:2013
Safety
Per FCC KDB 784748, Section A.8: To satisfy RF exposure requirements, this device and its antenna
must operate with a separation distance of at least 20 cm from all persons. Please maintain at least a
20 cm spacing from the antenna and device.
The maximum radio-frequency power transmitted in the frequency band(s) in which the radio
equipment operates is BLE, 1 Mbps, GFSK.
To avoid injury to yourself or others, always use radio equipment in
accordance with its intended use:
1. Keep fingers and lose objects out of the way when installing tag into a pallet
2. Tag is plug and play: no additional software configuration or accessories are required
3. If tag is significantly damaged, contact Descartes immediately and discontinue use
4. Ensure the tag is sitting flush with the pallet rail otherwise it is not installed correctly
5. Do not operate equipment outside of safe operating temperature range of -20˚C to +60˚C.
6. Do not pierce or puncture case as you may damage the lithium metal cell batteries
7. Do not tamper with tag case or internal components
8. Do not drop or shock tag as this may damage internal components including the antenna
If you have any additional queries, feel free to contact customer support:
Descartes Systems Group Inc.
Address: 105 Trafalgar Street, Floor 2, 7011, Nelson, New Zealand
Telephone number: [phone] (New Zealand)
E-Mail address: [e-mail]

9
PLT003
Production versions of the tag come in a sealed case with the batteries installed. They are already
powered on and ready for installation. The tags pass through a quality assurance phase to ensure
they are fit for purpose. This includes a range test to ensure the tag performs well at a distance.
Operating Instructions
Please review safety information before installation to avoid injury to yourself or others.
The tag is already powered on and ready to install. Simply insert the tag into the rail on the pallet.
Ensure that the tag is sitting flush with the pallet rail. It will make an audible click when installed
correctly. Once it has been installed, assign the tag into the CORE system.
Usage
The PLT003 COREInsight BLE Beacon tag is an active BLE beacon. The PLT003 tag advertises at an
interval of 7 times every 60seconds. COREInsight® Readers listen for special (custom) adverts from
the Beacon Tag and when it is in range (approx. 60 meters), the Reader collects these detections.
Images are indicative only, actual product may vary