Core Products 1180 User manual

Thank you for Choosing this furniture.
BEFORE YOU START ASSEMBLY
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Caring for your Pine furniture.
After care.
please store the carton at room temperature for 48 hours or more so the contents can acclimatise.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
Wipe the surfaces with a dry cloth and an occasional use of a normal household furniture polish.
Please do not use detergents or chemicals on your furniture.
45
x08
A
x08
B
1/4 x 0mm8 1/4
x10
C
4.0 x 35
x01
D
x01
E
Warning!: Keep out of reach from
children, Keep away from eyes, if
product gets into eye rinse thoroughly
and repeatedly with water. Do not
digest, if swallowed seek medical
advise from doctor.
TABLE 1180 01
02
01
02
03
02
03
04
04 05
05
A+D
( 2x )
03
B
B
D+A
B
A
D
D+A
D+A
A+D
A+D
B
B
B
B
BA
D
E
E
02
05
04
04
"Use a small
drop of glue”
"Use a small
drop of glue”
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings as detailed in the Parts List above.
In the unlikely event of a part being missing please EMAIL : [e-mail]
requesting the part code or the alpha reference. Alternately highlight your requirement on
the above diagram.
Please provide the following information so that your request can be sent direct to you.
Name
Address
Post Code Telephone No:
Email address
BATCH NUMBER 003/2018
Name & town of your retailer
Core Products 5/11.

03
50mm 50mm
50mm50mm
C
C
C
C
C
C
C
C
CC
C
01
* Place the table onto a clean work
top or other flat surface and use a
softcover to protec the surfaces, carefully
position the frame on the underside
of the table top (part 1) so all side rails
are 50mm from the edge of the table.