CORRECT CRAFT LINC PANORAY User manual

LINC PANORAY - SINGLE DISPLAY
2023 OWNER’S MANUAL
FOR SUPER AIR NAUTIQUE MODELS

P/N 230304
LINC PAN0RAY - SINGLE DISPLAY
2
TABLE OF CONTENTS
OVERVIEW
Product Information
Care and Maintenance
Touchscreen Display
Helm Command
User Interface
•Gauge Display
•Interaction Display
Using Helm Command
•Rotary Knob
•Button Shortcuts
HOME MENU
Main Functions
NCRS and NSS Systems
Steering Assist
River Mode
Awareness Camera
AUDIO MENU
Main Functions
Zone Control
Audio Setup
BALLAST MENU
Main Functions
Set Individual Tank Levels
SWITCHING MENU
Main Functions
MAP MENU
Main Functions
Waypoint Manager
Track Manager
5
5
6
7
8
9
10-13
14-25
26-27
29
30-33
34-35
36-37
38 - 39
40
41
42
43
44-45
46-47
48
49
LINC PAN0RAY - SINGLE DISPLAY
63
ENGINE DIAGNOSTIC MESSAGE - STOP ENGINE
If a Stop Engine message appears, the operator should shut down the
engine (via “STOP” button on keypad) as soon as possible, in a safe manner.
It is strongly advised that you contact your Nautique dealer immediately
when a diagnostic message appears.
If an engine diagnostic message appears, it will give you the DTC number
(Diagnostic Trouble Code) and message, the SPN (Suspect Parameter Number)
and FMI (Failure Mode Indicator) number. These numbers follow standards set by
the engine manufacturer or SAE J1939.
Pressing Previous or Next will cycle through the diagnostic messages and
pressing Ignore will close the diagnostic message window. If ignore is pressed,
a smaller message will appear in upper left hand corner of the screen until the
problem is corrected (see image below).
FIG. N4 - STOP ENGINE POP-UP MESSAGE
WARNING AND POP-UP MESSAGES