Cortex PR-2 User manual

Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
NOTE:
This manual may be subject to updates or changes. Up to date manuals are available through our
website at www.lifespanfitness.com.au
PR-2 HALF RACK
USER MANUAL

2

3
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
II. Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06
III. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .08
IV. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TABLE OF CONTENTS |

4

5
I. IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all instructions before using this machine.
•Install the product on a flat level surface
•Place your unit on a solid, level surface when in use.
•Never allow children on or near the machine.
•Keep hands away from all moving parts.
•Never drop or insert any object into any openings.
•Care must be taken when lifting or moving the equipment so as not to injure your back. Always
use proper lifting techniques and/or seek assistance if necessary.
•Keep children and pets away from the machine at all times. DO NOT leave children unattended in
the same room with the machine.
•Only 1 person at a time should use the machine.
•If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the
workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
•Do not use the machine near water or outdoors.
•Keep hands away from all moving parts.
•Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that
could become caught in the machine. Running or aerobic shoes are also required when using
the machine.
•Use the machine only for its intended use as described in this manual. DO NOT use attachments not
recommended by the manufacturer.
•Do not place any sharp objects around the machine.
•Disabled person should not use the machine without a qualified person or physician in attendance.
•Never operate the machine if the machine is not functioning properly.
•A spotter is recommended during exercise.
IMPORTANT SAFETY INSTRUCTIONS |

6| PARTS LIST
II. PARTS LIST
Part No. Item No. Name Qty N.W.
1PR2-1 Main Base Frame 1 4.948
2PR2-2 Right Base Frame 1 4.489
3PR2-3 Left Base Frame 1 4.489
4PR2-4 Tall Vertical Frame 2 6.611x2
5PR2-5 Short Vertical Frame 2 2.827x2
6PR2-6 Lat Support 1 4.033
7PR2-7 Center Cross Support 2 1.498x2
8PR2-8 Plate Support 2 2.967
9PR2-9 Dip Frame 1 0.158x12
10 PR2-10 Strengthen Board 12
11 60 Middle Sheet 2
12 50 End Cap 4
13 32 Handle Cover 2
14 Washer Ф10 28
15 M10mm Aircraft Nut 24
16 Carriage Bolt M10x70mm 24
17 60x50 Middle Sheet 2
19 PR2-11 Bar Support 2 2.193x2
20 PR2-12 Lat Handle A 1 0.837
21 PR2-13 Lat Handle B 1 0.837
22 Allen Bolt M10x20mm 4
23 Handle Cover 2
24 Plate Rest 4
25 Ball Pin 1

7PARTS LIST |
1
4
7
10 11 12
13
14
15
16
17
19 20 21
22
25
23 24
8 9
5 6
2 3
1150
1060
245
50x2.0
Ø60x1.5
50x2.0
Ø25x2.0
1230
1313
100
50x2.0
Ø25x2.0
1230
1313
100
50x2.0
2235
50x2.0
Ø25x2.0
750
190
1150
50x2.0
350
50x2.0
Ø25x2.0
154
Ø25x50x2.0
25x50x2.0
Ø32x2.0
200
654
513
162
60x1.5
Ø25x2.0
Ø25x2.0
180
178
Ø25x2.0
Ø25x2.0
180
178
Ø25x2.0
91
50x2.0
400

8| ASSEMBLY INSTRUCTIONS
STEP 1
1. Attach the Tall Vertical Frame (4#) and Short Vertical Frame (5#) to the Right Base Frame (2#).
2. Attach the Tall Vertical Frame (4#) and Short Vertical Frame (5#) to the Center Cross Support (7#).
3. Tighten all the bolts and nuts.
4. Loosen the screw (M) on the Plate Rest (24#) and push them onto
the Ø25 Circular Steel Tube of the Short Vertical Frame (5#) then tighten the screw (M).
Secure it with:
- 2x Strengthen Board (10#)
- 4x Carriage Bolt M10*70mm (16#)
- 4x Washer 10 (14#)
- 4x M10mm Aircraft Nut (15#)
Secure it with:
- 2x Strengthen Board (10#)
- 4x Carriage Bolt M10*70mm (16#)
- 4x Washer 10 (14#)
- 4x M10mm Aircraft Nut (15#)
III. ASSEMBLY INSTRUCTIONS
4
516 16
24
24
M
M
15
15
15
15
15
15
15 15 7
14
14
14
14
14
2
10
10 16
16
16
16
14
14
16
16
10
14
10

9ASSEMBLY INSTRUCTIONS |
STEP 2
1. Attach the Tall Vertical Frame (4#) and Short Vertical Frame (5#) to the Left Base Frame (3#).
2. Attach the Tall Vertical Frame (4#) and Short Vertical Frame (5#) to the Center Cross Support (7#).
3. Tighten all the bolts and nuts.
4. Loosen the screw (M) on the Plate Rest (24#) and push them onto
the Ø25 Circular Steel Tube of the Short Vertical Frame (5#) then tighten the screw (M).
Secure it with:
-2x Strengthen Board (10#)
-4x Carriage Bolt M10*70mm (16#)
-4x Washer Ø10 (14#)
-4x M10mm Aircraft Nut (15#)
Secure it with:
- 2x Strengthen Board (10#)
- 4x Carriage Bolt M10*70mm (16#)
- 4x Washer Ø10 (14#)
- 4x M10mm Aircraft Nut (15#)
4
24
M
5
10 16
16
15
15
15
15
15
15
15
3
10
10 16
16
16
16
15
16
10
16
14
14
14
14
14
14
14
14
24
M

10 | ASSEMBLY INSTRUCTIONS
STEP 3
1. Attach P and Q to the Main Base Frame (1#).
2. Tighten all the bolts and nuts.
Secure it with:
- 2x Strengthen Board (10#)
- 4x Carriage Bolt M10*70mm (16#) - 4x Washer Ø10 (14#)
- 4x M10mm Aircraft Nut (15#)
P
16
16
10
14
14
14
16
Q
16
10
14
15
15
15
15
1

11ASSEMBLY INSTRUCTIONS |
STEP 4
1. Plug the Dip Frame (9#) into the Tall Vertical Frame (4#). You can choose the left side or right side.
Push the Ball Pin (25#) into the holes on Tall Vertical Frame (4#).
4
25
9
4

12
STEP 5
1. Attach the Lat Support (6#) to the left and right Tall Vertical Frame (4#).
2. Tighten all the bolts and nuts.
3. Attach the Lat Handle A, B (20#, 21#) to the Lat Support (6#).
4. Loosen the screw (M) on the Plate Rest (24#) and push them onto
the Ø25 Circular Steel Tube of the Short Vertical Frame (5#) then tighten the screw (M).
Secure it with:
- 2x Strengthen Board (10#)
- 4x Carriage Bolt M10*70mm (16#)
- 4x Washer Ø10 (14#)
- 4x M10mm Aircraft Nut
Secure it with:
- 4x Allen Bolt M10*20mm (22#)
- 4x Washer Ø10 (14#)
16
4
410
10 14 15
6
20
21 15
15
22
22
22
22
15
14
14
14
14
14
14
14
16
16
16
| ASSEMBLY INSTRUCTIONS

13ASSEMBLY INSTRUCTIONS |
STEP 6
1. Plug the 2x Bar Support (8#) into the Left and Right Tall Vertical Frame (4#).
2. Plug the 2x Bar Rest (19#) into the Left and Right Tall Vertical Frame (4#).
4
4
8
8
19
19

14
IV. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition,
they come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Please email us at [email protected] for all warranty or support issues.
For all warranty or support related enquiries, please lodge a support ticket first by sending us an email.
| WARRANTY

15

WWW.LIFESPANFITNESS.COM.AU