Costar CCT2L00 User manual

DESCRIPTION
ATTENTION
FEATURES
Thank you for your purchasing this product. Before attempting to connect or operate
this product, please read these instructions carefully and save this manual for futureuse.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL
1.
is DC12V/AC24V.
2.
3.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
Locations where temperature is lower than -10C or higher than 50C;
Locations where humidity is higher than 95%;
Locations where there are large amounts of water vapor and steam.
5
6.
7.
8.
①
②
③
Use the Appropriate Power Supply
The input power for the camera Be sure to connect it to the
appropriatepower. Wrong connection may cause malfunction and/or damage to the
video camera.
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage
.
. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove.
Use a mild detergent and wipe gently.
Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.Use a piece
of lens tissue or cotton tipped applicator and ethanol.
Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely brightobjects that
causes mear to appear irrespective of whether the camera is operating or not. This
can damage the sensor.
Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device
which emits strong electromagnetic field, some irregularity such as noise on monitor
screen may happen.
CCT2L00
★Ultra Wide Dynamic Range
The captured wide dynamic range can reach 120dB maximum.
★High Effective Resolution
Image resolution reach to 1080P in HD mode TVI CVI AHD and to 960H
in analog mode CVBS , offering enhanced horizontaland vertical resolution u
seable in existing as well as new CCTV systems
(/ / )
()
.
★Low illumination working capability
Color DSS: 0.00008 Lux, BW DSS: 0.00008 Lux
★3D Noise Eliminating Technology
Adopts Sony fully digitalized 3D noise reduction technology to minimize
noise, extending DVR storage by 30%+.
This camera resolution HD ode VI VI HD each o 080P na
log ode VBS each o 60H and the industry-leading wide dynamic range
DR is upto 120dB. This WDR ensures brilliant image quality under any lightin
g environment.The image and color quality is also excellent in low illumination en
vironments. Thiscamera series is a ultra wide dynamic range camera in the real sen
se using digitalsampling which can't be paralleled by average wide dynamic range c
ameras usingolder generation sensor imagers. The application of 3D-DNR technol
ogy ensureshigher S/N, which efficiently reduces the digital storage and transmissi
on datasaving system cost. Fashionable and professional exterior design and specia
l 3-axisbracket, makes round-the-clock surveillance easy and convenientt.
(/ / ) ,
() ,
()
mTCArt1 a
mC r t9
W
★3-axis bracket
All directional bracket, easy control.
★SONY 2.13Mp CMOS Image Sensor
This camera adopts SONY 2 13Mp CMOS image sensor and Eyenix SP techno
logy. The sensor picks up details from each pixel based on hundreds of samples pe
r video frame. Vs CCD's limited exposures, to ensure wider dynamic range than is
possible with analog CCD. The image quality is even brilliant under extreme light
ing conditions.
.D
Built-in filter switch-over device, ensures the cameras work properly both in day and night.
★IR-CUT
PARTS INSTRUCTION AND INSTALLATION
★OSD Menu(optional)
Powerful OSD menu allows for various function settings.
★Auto D/N shift mode
Adopt color mode in day, because the light is enough in day; at night the
illumination is lower which need higher sensitivity and better image quality, so
it change to B/W mode automatically.
2MP 1080P 4-in-1 WDR Camera
Operating Instruction
CCT2L00
Model
Sony 1/2.8" imx290LQR CMOS
Image Sensor
NTSC / PAL; Progessive Scan
Singal Mode
1945 (H) × 1097 (V) approx. 2.13M pixels
Effective Pixels
1920 x 1080
Max Resolution
1080P @25/30 fps / 720P @50/60 fps
Electronic Shutter
AUTO/ Manual 1/50（）-1/60 1/60,000sec
Frame Rate
Min. Illumination
Color DSS: 0.00008 Lux, BW DSS: 0.00008 Lux
≥50dB (AGC OFF)
S/N Ratio
HD: AHD / CVI / TVI. Analog: CVBS(960H)
Video Output
Internal
Synchronization
Auto (ICR) / Color / B&W / External
Day/Night
3D-NR (Off / Low / Middle / High)
Noise Reduction
Wide Dynamic Range
Off / Low / Middle / High: WDR SNR: 120dB
Off / BLC
Backlight Compensation
Auto / Auto ext / Preset / Manual
Auto White Balance.
YES (0 - 20 Steps)
Auto Gain Control
Off / X2 / X4 / X8 / X16 / X32
Sence Up
Off / On: Low / Middle / High
Defog
via DVR Coaxial Controlled or via OSD Black Button
DC12V / AC24V
-4℉ - 122℉ (-20°C ~ +50°C)
Weight
0% ~ 90%
Power Supply
Dimensions
Working Temperature
Humidity
OSD Menu
*Specifications subject to change without notice. CCL2L00-20180725
1 2
4 5 6
1.The hole for Bracket screw
2.Fixed Lens Screw
3 Video Output
4.Power Input
5 Power Indicator
6Button for OSD menu
.
.
.
Installation from bottominstallation from upside
Camera Installation
This camera can be installed by brackets from both upside and bottom,
fixed the bracket on the wall by screw or other location.
NO.DC Drive
1 Control -
2 Control +
3 Drive +
4 Drive -
1
2
3
4
Auto Iris Interface
Definition
DC12V/AC24V VIDEO OUT
MENU
PL
3.86"
2.05"
2.20"
2.05" x 2.20" x 3.86"(52mm x 56mm x 98mm)
0.48 lbs. (216g)
3

O S D M E N U
MENU
IRIS
EDGE DET
EXPOSURE
BACKLIGHT
COLOR
IMAGE
MOTION
SYSTEM
OFF(ON )
DAY&NIGHT
DNR
AUTO COLOR ,B&W ,EXTERN()
HIGH OFF LOW MIDDLE()、、
EXIT
OFF( HLC WDR )、、BLC
MENU：
Press the MENU button to display MENU. You can set the IRIS, EDGE
DET,EXPOSURE, BACKLIGHT, DAY&NIGHT, COLOR,DNR,IMA
GE,MOTION and SYSTEM to ensure the image quality.
EDGE DET：
EXPOSURE：
Press the MENU button into the exposure submenu,and can setup the
BRIGHTMESS, SHUTTER, SENS-UP, AGC to what you need.
IMAGE:
Press the MENU button into the IMAGE submenu, can as needed SHAR
PN-ESS, GAMMA,MIRROR,FLIP,D-ZOOM,ACE,DEFOG,SHADING,
PRIVACY
SYSTEM:
Press the MENU button into the SYSTEM submenu,set the CAMERA ID,
SYSTEM,LANGUAGE,RESET as needed.
ELC(ALC)
OFF( HLC WDR )、、BLC
ELC(ALC)
OFF(ON )
EDGE DET
LEVRL
COLOR
5
RETURN
YEL CYN GRN RED BLU BLK WHT) ( 、、 、、、、MAG
EXPOSURE
BRIGHTMESS
SHUTTER
7
SENS-UP
AGC
RETURN
AUTO (MAMUAL ,FLICKER ）
7
OFF X2 X4 X8 X16 X32
HLC
LEVEL
BLK WHT YEL CYN GRN MAG RED BLU(、、、、、、 ）
BLC
H-POS
RETURN
8
V-POS
7
H-SIZE
3
V-SIZE
3
1.BLACKLIGHT-HLC
2.BLACKLIGHT-BLC
3.BLACKLIGHT-WDR
：
：
：
Press the MENU button into the HLC submenu, can adjust HLC’s level .
Press the MENU button into the BLC submenu, can adjust BLC area’s
position and size.
10
RETURN
COLOR
BACKLIGHT：
Press the MENU button into the WDR submenu, can adjust WDR MODE
to: HIGH, MIDDLE and LOW.
DRW
WDR MODE
RETURN
HIGH(LOW MIDDLE)、
ROI MODE
WEIGHT
LINE(FRAME)
OFF(ON )
AUTO
RETURN
IR-LED
ON OFF（）
ANTI-S T.A
AGC THRES
AGC MARGIN
DELAY
MIDDLE(HIGH LOW)、
10
DAY&NIGHT
Press the MENU button into the DAY&NIGHT submenu, can adjust
AUTO , COLOR, B&W, EXTERN etc.
10
10
RETURN
IR LED
ANT-SAT
ON(OFF))
10
B&W
EXTERN
RETURN
IR-LED
ON OFF(）
ANTI-S T.A
DNTHRDS﹥
NDTHRES﹥
DELAY
MIDDLE(HIGH LOW)、
10
13
7
EXTERN SW
LOW(HIGH)
COLOR:
Press the MENU button into the MANUAL submenu, can adjust
AWB,COLOR GAIN.
COLOR
AWB
RETURN
AUTO(AUTOEXT PRESET MANUAL)、、
COLOR GAIN
10
IMAGE
SHARPNESS
RETURN
GAMMA
D-ZOOM
ACE
0 1X N.
FLIP
OFF LOW MIDDLE HIGH(、 、 )
MIRROR
5
0.55
DEFOG
SHADING
PRIVACY
OFF ON()
OFF ON()
OFF ON()
OFF ON()
MOTION:
Press the MENU button into the IMAGE submenu, can as needed DET
WINDOW,SENSITIVITY,MOTION,TEXT ALARM,SIGNAL OUT
MOTION
DET WINDOW
SENSITIVITY
MOTION
SIGNAL OUT
OFF(ON)
OFF(ON)
RETURN
TEXT ALARM
OFF (ON)
5
SYSTEM
COM.
OUTPUT
IMAGE RANGE
CAM TITLE
RESET
ON
RETURN
LANGUAGE
HD-CBCR(YUV SD CBCR、- )
OFF
ENG(CHN CHN[S] JPN KOR)、、、
COLOR SPACE
COLOR BAR
FULL(COMP、USER )
OFF(RIGHT UP ,LEFT DOWN )