Costway CM23976 User manual

Please give us a chance to make it right and do better !
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP !
Contact Us!
Do NOT return this item.
US office: Fontana UK office: Ipswich AU office: Truganina
DE office: Hamburg FR office: Saint Vigor d'Ymonville PL office: Gdańsk
US:[e-mail]
UK:[e-mail]
AU:[email protected]
For comfort and safety, we recommend wearing long
sleeves and gloves to protect your arms and hands
from branches during assembly.
NOTE
USER’S MANUAL
Christmas Tree
CM23976
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled
near to the area in which they will be placed in use, to avoid
moving the product unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product
away from babies and children as they potentially pose a serious
choking hazard.
Your item has been carefully packaged for transit. However, due to
the nature of the materials used; some debris may appear in the
bottom of the packaging or while unpacking. We have designed this
item so its beauty will not be diminished by the debris.
Due to the natural transit of this item, we have found that the item
may flatten during packaging and need to be fluffed. Please know
that this can be remedied by manually shaping to your desired look.
Adjust the branch tips and put
some decorations if desired.
Insert the section C into
the section B.
Let the hinged branches fall
into place.
Insert the section B
into the section A.
Let the hinged branches
fall into place.
Tighten the bolts into the
tree stand.
Drop the section A
into the tree stand.
Included Parts: Section A +
Section B + Section C +
Tree Stand + 3 Bolts
Unfold the tree stand.
INSTALLATION INSTRUCTIONS:
12
02
AB C
3
456
789
NOTE
For comfort and safety, we recommend wearing long
sleeves and gloves to protect your arms and hands
from branches during assembly.
Before You Start
01

• If product becomes dusty or dirty, do not use detergent as it may
discolor the product.
• When not in use, store in a cool, dry location.
• Keep away fiom heat and moisture.
Please make sure to keep the instructions for reference when setting up your
tree next year!
Made In China
Indoor Use Only
CARE INSTRUCTIONS:
Step 1: Lift each tree section directly up.
Step 2: Separate the tree sections (starting at the top). Fold branches up to
avoid crushing the tips. You can tie the ranches up to make the section easier
to handle and set up in future years.
Step 3: Unscrew tree stand to release the bottom section. Fold stand and
tighten bolts back into stand to prevent losing the bolts.
Step 4: Store in a cool, dry area.
TREE STORAGE:
03
Upper Interface Lower Interface
Upper
Interf
ace
Lower
Interf
ace
Controller
+ Plug
Lighting Assembly
04
Connect them together as
shown in the picture
Controller+ Plug
Controller: The Christmas tree has 8
lighting modes, which can be adjusted
by the controller.
Spread out the branches as shown in the figure 1 & 2.
10