Costway Patiojoy HW64403 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
4 Pcs Wicker Sofa Set
HW64403
FLOOR AREA
2MX2M
ASSEMBLED BY 2 ADULTS

www.costway.com
Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
02

www.costway.com
Not actual size
Left Arm x 2 Right Arm x 2
Back x 2
Cushion x 2
Seat x 2
03

www.costway.com
Not actual size
04

www.costway.com
Hardware List
Actual size
I4
M6 x 15mm
BOLT
BOLT
J4
M6 x 25mm
BOLT
M6 x 35mm
K12
O8
ADJUSTABLE
LEVELLERS
M20
M6
WASHER
N1
4 x 4
ALLEN WRENCH
05

www.costway.com
STEP 1
Insert adjustable levellers (O) to boom of each
Arm(A) by turning clockwise unl secure.
Adjust height as desired.
Repeat step for the other side arm(B).
06

www.costway.com
STEP 2
(K & J) with washers (M) through the pre-drilled holes
Aach the seat(D) to the arm (B) by inserng bolts
on the seat into the pre-welded nuts on the arm.
Repeat step for the other side arm(A).
07
assembly is completed.

www.costway.com
Aached the back(C) to the seat (D) by inserng
bolts (K) with washers (M).
Aached the back(C) to the arm (A&B) by inserng
bolts (I) with washers (M).
STEP 3
STEP 4
08

www.costway.com
Tighten all the bolts with the allen wrench,
and turn the chair to the upright posion.
place the seat cushions(P) onto the chair seat.
Your chair is now ready for use.
STEP 5
09

www.costway.com
Maximum Loads
250 lbs
This item is only suitable within the specified maximum load-bearing. Heavier loads than
the indicated load capacity may cause instability, resulting in possible injuries.
10