Costway GT3665US User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Electric Pole Saw
GT3665US

03

04

05

06

12.
13. Chain Tension Ring
07

08

09

10

11

4. Assembling the saw bar and saw chain
e) Loosen the fastening knob (12) on the chain
wheel guard (11) and remove chain wheel
guard.
f) Place Saw Chain (9) on the guide bar (10) with
the guide groove (14) (P1)
g) Place the saw chain (9) around the chain wheel (15).
Heed the assembly direction.
h) Place the guide bar (10) around the guide groove(14))
i) Attach the chain wheel guard (11).
j) Tighten the fastening knob (12) only slightly
k) Hole (13) on the guide bar isthe holderfor chain
tensioning pin( 16).
l) Thread (17) is the holder for bar fastening knob(12)
m) Ensure that chain tensioning pin (16) is positioned in hole (13)
on the bar. Thepin must be completely inserted into the hole.
n)
P1 P2
5. Tensioning the saw chain
a) Turn the guide bar fastening knob (12)
anti-clockwise slightlyto loosen the the
guide bar.
b) Set the tension of sawchain using chain
tensioning ring (2). Turn this quick
tensioning device clockwise to increase
the tension and anticlockwise to loosen
the tension.
c) Tighten the fastening knob(12) to tighten the guide bar. Where
saw chain has been newlytensioned, re-adjust the chain tensio
n
after short period in operation.
Check the chain tension before each use of the Pole Saw
14
15
13
16
12

13

14

15

16

17

120V/60HZ
250mm (10”)
8A
18