Costway HW64004 User manual

USER'S MANUAL
TV Stand
HW64004

1
1/7
Hardware List
Parts List
10 pcs
A
B
PRODUCT ASSEMBLY
10 pcs
6*30mm
6*35mm
15*10mm
20 pcs
C
D
E
F2.5*12mm
6 pcs
6 pcs
1 pc
16 pcs
4*35mm
4*45mm
7
1 pc
G
H
6*35mm
2
1 pc
8
2 pcs
3
1 pc
9
1 pc
4
1 pc
10
1 pc
5
1 pc
11
1 pc
6
1 pc
8 pcs
1 pc
Top Panel
Bottom Panel
Left Leg
Right Leg
Left Panel
Right Panel
Divide Panel
Connect Bar
Back Panel
Left Door
Right Door

2/7
Part List Assembly Overview
PRODUCT ASSEMBLY
1
2
3
4
5
6
7
8
8
9
10
11

Step 1
3/7
10 pcs
A
PRODUCT ASSEMBLY
4 pcs
C
6 pcs
E
4
3
1
8
8
2
E
C
Step 2
1) Lay Top Panel (1), Left Leg (3) and Right Leg (4) as shown on a flat and soft
surface that does not scratch the parts.
2) Screw Cam-bolt (A) into the designated holes on each .
Attach Connect Bar (8) to Bottom Panel (2)
with Wood Dowel (C) and Screw (E).

Step 3
4/7
PRODUCT ASSEMBLY
6 pcs
B
C6 pcs
5
6
7
C
B
6 pcs
C
6 pcs
D
Step 4
1) Attach Left Panel (5), Right Panel (6) and
Divide Panel (7) to Top Panel (1) via Wood
Dowel (C) and Cam-bolt on (1).
2) Insert Cam-lock (B) to the designated holes on
(5, 6 & 7) then turn clock-wise to lock onto Cam-bolt.
1
Attach Bottom Panel (2) to (5, 6 & 7)
via Wood Dowel and Screw (D).
2
D
C
5
6
7

Step 5
5/7
PRODUCT ASSEMBLY
Step 6
C2 pcs
H
3
G
H
G
1 pc
4 pcs
G
C
B
4
B
2 pcs
B
C2 pcs
G4 pcs
2 pcs
B
8
8
5
1) Attach Left Leg (3) to Connect Bar (8）
via Wood Dowel (C) and Cam-bolt on (3).
2) Screw Bolt (G) to (3) through the hole on (5).
Tighten it with Allen Wrench (H).
3) Insert Cam-lock (B) to the designated holes on
(8) then turn clock-wise to lock onto Cam-bolt.
8
8
1) Attach Right Leg (4) to Connect Bar (8) via Wood Dowel (C) and Cam-bolt on (4).
2) Screw Bolt (G) to (4) through the hole on (5). Tighten it with Allen Wrench (H).
3) Insert Cam-lock (B) to the designated holes on (8) then turn clock-wise to lock
onto Cam-bolt.

Step 7
6/7
PRODUCT ASSEMBLY
16 pcs
F
F
9
Attach Back Panel (9) with Screw (F).

Step 7
7/7
PRODUCT ASSEMBLY
Push the button to relief
the door pin.
up
down
10
11
If the door not firm, please
screw the middle screw to adjust
the height of the wheel as shown.
Insert sliding door (10 & 11) to assembled unit as shown.
Important: If the door not firm, please screw the middle screw to adjust the
height of wheel as shown.

TIPS：
Your suggestions and comments for Costway are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2018
Great product so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, Costway will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
UNITED STATES
CANADA UNITED KINGDOM
GERMANY
FRANCE
ITALY
SPAIN
JAPAN
RUSSIA
AUSTRALIA
US office:Fontana
UK office:Ipswich