COTSWOLD SLEEP STATION User manual

Page 1 of 8
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
HEALTH & SAFETY:
DO NOT jump on this item.
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a le el, e en surface.
WARNING: If this ite is placed on a non-carpeted floor you ust place so e protection under all legs to stop
the ite fro oving. If this is not adhered to there is no guarantee if the ite collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
Keep any sharp objects away from the item.
It is necessary to entilate the room well to keep humidity low and to pre ent formation of mold in or
around the frame.
ASSEMBLY INSTRUCTIONS
SLEEP STATION - CHEST
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SLEEP
STATION CHEST.

Page 2 of 8

Page 3 of 8
Parts List for Chest Hardware List for Chest (found in box 5)
Part Description Box Qty Part Description Qty
1 Top Panel 5 1 A
Wooden Dowel
38
2 Left Panel 5 1 B
Wooden Dowel
12
3 Right Panel 5 1 C
3.5 x 30 mm Screw
48
4 Centre Panel 5 1 D 3.5 x 16 mm Screw 18
5 Base Panel 5 1 E
4 x 35 mm Screw
6
6 Top Plinth 5 1 F
Tack
40
7 Base Plinth 5 1 G
Handle
6
8 Plinth 5 2 H
Bracket
6
9 Short Top Plinth 5 1 I
Drawer Stopper
6
10 Shelf 5 1 J
Shelf Support
4
11 Drawer Front 5 3 **You will need a s all allet and screwdriver (not
provided).
12 Left Side Drawer Panel 5 3
13 Right Side Drawer Panel 5 3
14 Drawer Back 5 3
15 Drawer Base 5 3
16 Back Panel 5 2
17 Spine 5 1
Step 1: Insert hardware parts A to the top plinth (6), base plinth (7) and short top plinth (9) using a small
mallet (not pro ided). Attach hardware part H to the base plinth (7) using hardware part D and a screwdri er
(not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .

Page 4 of 8
Step 2: Insert hardware parts A, B and J as shown using a small mallet (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .
Step 3: Assemble the drawer components using hardware parts C, D, E and G with a screwdri er (not
pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .
Step 4: Attach the centre panel (4) to the base panel (5) using hardware part C, then attach the short top
plinth (9) to the centre panel using hardware part D. You will need to use a screwdri er (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .

Page 5 of 8
Step 5: Attach the left panel (2) using hardware parts C and D with a screwdri er (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .
Step 6: Attach the base plinth (7) using hardware part D, then attach the plinths (8) using hardware part C.
You will need to use a screwdri er (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .

Page 6 of 8
Step 7: Attach the right panel (3) using hardware part C and D, then attach hardware part H using hardware
part D. You will need to use a screwdri er (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .
Step 8: Attach the top panel (1) using hardware part C and a screwdri er (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .

Page 7 of 8
Step 9: Connect the back panels (16) with the spine (17) and secure in position using hardware part F and a
small mallet (not pro ided).
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .
Step 10: Insert the shelf (10) and the assembled drawers.
DO NOT use any power tools as this ay da age the fra e and will invalidate any clai .

Page 8 of 8
How to Re ove Drawers if Required:
To unlock, locate the drawer and turn the drawer stopper 180 degrees.
To lock, turn the drawer stopper 180 degrees.
Additional Information: