Courmia GDK260 User manual
PHOTO OF PRODUCT
MODEL# GDK260
DIGITAL KETTLE
COVER
www.gourmia.com
© 2016 Gourmia
www.Gourmia.com
The Steelstone Group
Brooklyn, NY
All rights reserved. No portion of this manual may be reproduced by any means whatsoever
without written permission from The Steelstone Group, except for the inclusion of quotations in a
media review.
Although every precaution has been taken in the preparation of this manual, The Steelstone
Group assumes no responsibility for errors or omissions. Nor is any liability assumed for damages
resulting from the use of the information contained herein. Although every eort has been made
to ensure that the information contained in this manual is complete and accurate, The Steelstone
Group is not engaged in rendering professional advice or services to the individual consumer;
further, The Steelstone Group shall not be held responsible for any loss or damage allegedly
arising from any information or suggestion in this manual.
10 9 8 7 6 5 4 3 2 1
Printed in China
Welcome to the Convenienceof
Digital Kettles from Gourmia!
The Gourmia Digital Kettle was designed to make boiling water easy, ecient, and
customizable. The Gourmia Digital Kettle enables you to choose the perfect water
temperature for whatever you need—from warm to boiling. And, in case you want to
save the heated water for a little while, the Gourmia Digital Kettle will keep your water
at the desired temperature for up to four hours. With a sleek, modern design and the
ultimate in functionality, the Gourmia Digital Kettle is the perfect kitchen appliance.
The following pages of this manual oer full and complete instructions for
all the functions and features of your Digital Kettle. Inside these pages, you’ll nd
information on and instructions for assembly, operating, cleaning and maintenance
of your Digital Kettle. Please read all safety instructions and complete directions
carefully for safe usage at all times.
Thank you for your purchase! We hope you will enjoy all the innovative products
brought to you by our family at Gourmia.
TABLE OF CONTENTS
SAFETY FIRST p. 6
FEATURES AND FUNCTIONS p. 8
OPERATING INSTRUCTIONS p. 9
CLEANING & MAINTENANCEp. 11
TROUBLE SHOOTING p. 12
WARRANTY & SERVICEp. 14
SAFETY FIRST
SAFETY FIRST
IMPORTANT SAFEGUARDS
When operating this electric appliance, basic safety instructions should always
be followed. Refer to the following for these instructions
1. READ ALL SAFETY & USAGE INSTRUCTIONS BEFORE USING.
2. Keep children away from the machine when in use.
3. Never operate the appliance with a damaged cord or plug or one that has
malfunctioned or been damaged in any way. If necessary, immediately
contact Customer Service for assistance.
4. The kettle should not be used with an external timer or a separate remote
control system.
5. Operate the appliance on a level surface well away from any hot gas or
electrical burner, heat source, combustible spray cans or pressurized items.
6. To avoid injury or death from electrical shock, do not operate the machine
with wet hands, while standing on a wet surface or while standing in water.
Also, do not use the machine outdoors or in wet conditions.
7. Do not immerse the machine directly in water to clean.
8. Do not ll the water to higher than the maximum water level.
9. When lling the kettle, make sure it is not plugged in to an electrical outlet.
10. Make sure the lid is closed before boiling water. Do not open the lid until the
boiling is nished.
11. Make sure the power to the kettle is turned o before removing the base.
12. When not in use, unplug the kettle.
13. Only use the base that accompanied the kettle.
14. This machine is for household use only. Any other use will void the warranty.
SAVE THESE INSTRUCTIONS
6 7
FOR HOUSEHOLD USE ONLY
Electrical 3-conductor Cord Set:
Appliance is equipped with a
3-conductor cord set that has a 3 prong
grounding-type plug. It should be
properly connected to a grounding-type
a 3-grounding outlet unit, and as such,
the grounding prong should never be
removed. If needed, purchase a 2-prong
adapter and ground it to the outlet.
Do not use an adapter unless you are
for assistance.
A short power cord or a detachable power
cord is provided to reduce the risks of resulting
from becoming entangled in or tripping over a
longer cord accidentally.
OPERATING INSTRUCTIONS
BEFORE USING FOR THE FIRST TIME
1. Remove all of the various packaging, stickers or accessories from both
the inside and outside of the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the
cord into the notch.
BOILING WATER
1. Open the lid of the kettle, add water and close the lid. Note: You
must add at least enough water to go above the Min level but less
than the Max level.
2. Plug the base into the electrical outlet and place the filled kettle
onto the base. The kettle is on standby and only the I/O and + & -
buttons can be used.
3. Choose the desired water temperature:
4. At any time during the boiling process, you can increase or
decrease the desired water temperature by pressing + or –.
5. Once the water reaches the desired temperature, the kettle stops
the process. After approximately 2 minutes, the LED display turns
off and the kettle returns to standby mode.
•Boil water: Press I/O. The kettle will begin the boiling process.
•Heat water to a specific water temperature: Press + or – and a
temperature appears on the LCD starting with 104°F. Press + or –
again to increase or decrease the desired water temperature.
Press I/O and the kettle begins to heat the water.
Note: If you don’t press I/O within 10 seconds, the kettle returns
to standby mode.
8 9
OPERATING INSTRUCTIONS
HOLDING HOT WATER AT A SPECIFIC TEMPERATURE
1. Fill with water up to Max level.
2. Press the Keep Warm button and press + or – to increase or decrease the
desired water temperature.
Note: The highest temperature that the kettle can hold is 194°F.
3. Press I/O. The kettle starts the boiling process. When the water reaches the
desired temperature, the kettle holds the water at that temperature for 4 hours.
Note: If you don’t press I/O within 10 seconds, the kettle returns to standby
mode.
At any time during the boiling process, you can increase or decrease the desired
water temperature by pressing + or –.
FEATURES AND FUNCTIONS
8
FEATURES AND FUNCTIONS
CONTROL PANEL
B
C
D
E
G
F
H
A. Lid
B. Control Panel
C. Handle
D. Power Cord
E. Spout
F. Water Gauge
G. Body
H. Base
A
°F
CLEANING AND MAINTENANCE
BEFORE USING FOR THE FIRST TIME
1. Remove all of the various packaging,stickers or accessories from both the
inside and outside of the kettle.
2. Adjust the length of the cord by winding it under the base. Wedge the cord
into the notch.
BOILING WATER
1. Open the lid of the kettle, add water and close the lid.
Note: You must add at least enough water to go above
the Min level but less than the Max level.
2. Plug the base into the electrical outlet and place the lled
kettle onto the base. The kettle is on standby and only the
I/O and + & - buttons can be used.
3. Choose the desired water temperature:
• Boil water--Press I/O. The kettle will begin the boiling process.
• Heat water to a specic water temperature--Press + or – and a temperature
appears on the LCD starting with 104°F. Press + or – again to increase or
decrease the desired water temperature. Press I/O and the kettle begins to heat
the water.
Note: If you don’t press I/O within 10 seconds, the kettle returns to standby
mode.
4. At any time during the boiling process, you can increase or decrease the
desired water temperature by pressing + or –.
5. Once the water reaches the desired temperature, the kettle stops the
process. After approximately 2 minutes, the LED display turns o and the kettle
returns to standby mode.
10 11
CLEANING YOUR KETTLE
• Before cleaning the kettle, make sure it is unplugged from any electrical
outlets. Also, let the kettle cool down before cleaning.
• Do not immerse the kettle, the power cord, power plug, or power socket
into water.
• Wipe the outside of the kettle with a damp cloth.
• Do not use a scouring powder or other cleaning product on the kettle as it
could damage the surface.
DESCALING
To keep the kettle working well, you should descale regularly, preferably at least
once a month or more frequently if your water is very hard.
There are three dierent ways you can descale your kettle.:
Using white vinegar:
1. Fill the kettle with 2 cups of vinegar.
2. Let the vinegar soak in the kettle for 1 hour. Do not turn on the kettle during
this time.
3. Pour out the liquid and rinse 5 or 6 times.
Using citric acid:
1. Boil 2 cups of water in the kettle.
2. Add 5 teaspoons of citric acid and let it soak for 15 minutes.
3. Pour out the liquid and rinse 5 or 6 times.
Using a descaler:
1. Use a descaler specically for plastic kettles and follow the manufacturer’s
instructions.
2. Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
CLEANING AND MAINTENANCE
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
HOLDING HOT WATER AT A SPECIFIC TEMPERATURE
1. Fill with water up to Max level.
2. Press the Keep Warm button,and press + or – to increase or decrease the
desired water temperature.
Note: The highest temperature that the kettle can hold is 194°F.
3. Press I/O. The kettle starts the boiling process. When the water reaches the
desired temperature, the kettle holds the water at that temperature for 4
hours.
Note: If you don’t press I/O within 10 seconds, the kettle returns to
standby mode.
At any time during the boiling process, you can increase or decrease the
desired water temperature by pressing + or –.
TROUBLE SHOOTING
12 13
TROUBLE SHOOTING
In the unlikely event that you experience a problem with your device,
please take a couple of minutes to check these possible causes prior to
contacting customer support.
TROUBLE SHOOTING
Problem:
The kettle does not work or stops before coming to the boil.
Possible Causes:
• Check that your kettle is properly connected.
• The kettle has been switched on without water.
• An accumulation of scale has caused the overheat cut-out to operate:
Solutions:
• Allow the kettle to cool for at least 15 minutes and ll it with water.
• Descale rst if scale has accumulated.
• Switch the kettle on.
Problem:
The water tastes of plastic.
Possible Causes:
Generally, this happens when the kettle is new.
Solutions:
Discard the water from the rst few boilings.
If the problem persists, ll the kettle to maximum and add two teaspoons of
baking soda. Bring to a boil and descale the water. Rinse the kettle thoroughly.
Problem:
The kettle has been dropped, it leaks, or there is damage to the power cord, plug,
or base of the kettle.
Solutions:
• Do not use the kettle. No attempt must be made to dismantle the kettle or its
safety devices.
• If the supply cord is damaged, it must be replaced by the manufacturer, its
after-sales service center or a similarly qualied person, in order to avoid any
danger.
• Return your kettle to your local After-Sales Service Center; only they are
authorized to carry out repairs. See the guarantee conditions and list of centers
in the booklet supplied with your kettle. The type and serial number are shown
on the bottom of your kettle. This guarantee covers manufacturing defects and
domestic use only. Any breakage or damage
resulting from failure to comply
with the instructions for use is not covered by the guarantee.
• Reserves the right to modify the characteristics or components of its kettles at
any time in the interest of the consumer.
ACCIDENT PREVENTION
• Position the kettle and its supply cord well to the rear of the work surface,
out of the reach of children.
• If an accident does occur, run cold water over the scald immediately and call a
doctor if necessary.
• For a child, a burn or scald, even if slight, can sometimes be serious.
• In order to avoid any accident: do not carry your child or baby at the same time
as drinking or carrying a hot drink.
WARRANTY AND SERVICE
WARRANTY & SERVICE
For Customer Service or Questions, Please call: 888-552-0033
www.gourmia.com
14 15
DISPOSAL OF THE DEVICE
PROTECTION OF THE ENVIRONMENT
At the end of the life of your product, it should go to a specially adapted
waste-recycling center.
ENVIRONMENT PROTECTION FIRST
1. The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be handed
over to the applicable. Collection point for the recycling of electrical and
electronic equipment.
2. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about the recycling of this product, please contact
your local council oce or your household waste disposal service.
This Limited Warranty is for one full year from the date of purchase. It is
applicable to the original purchaser only and is not transferable to a third party
user. Repair or replacement of defective parts is solely at the seller’s discretion.
In the event that repair isn’t possible, the seller will replace the product/part. If
product repair/replacement won’t suce, the seller has the option of refunding
the cash value of the product or component returned.
Product defects not covered under the Warranty provisions include normal
wear and damage incurred from use or accidental negligence, misuse of
instruction specications or repair by unauthorized parties. The manufacturing
company is not liable for any incidental or consequential damages incurred by
such circumstances.
Table of contents
Other Courmia Kettle manuals
