Step3:After add a camera successfully, click for Android or
for Iphone, then you can see step 4 image
Step 4: please click Wi-Fi setting, then you can see step 5 image
Step 5: Choose your Wi-Fi name and add password in
Step6: Then you can see Wi-Fi connected and Wi-Fi setting is done, click
"done”then you can go back to view the camera video.
Note:
1) If configuration failed due to wrong password or the target network is invalid,
please power off the camera and configure again after power it on.
2) Please make sure that the target Wi-Fi Network works normally and you have
access to it (password is correct); otherwise the Wi-Fi configuration will fail
(although the camera will initialize too), and you need to configure again.
3) The interface of iOS and Android maybe different slightly.
4. View Live Video
There are two ways to view live video. ( cameras already added before)
