Covid DH18-200 User manual
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 1
Table of Contents
Introduction .................................................................. 2
Features .................................................................... 2
Package Contents .............................................................. 2
Specifications ................................................................. 3
Operation Controls & Functions ..................................................... 4
Application Example ............................................................. 5
Warranty .................................................................... 6
Safety Information .............................................................. 6
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 2
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
Introduction
Featuring full support of 18Gbps HDMI, the DH18-200 can split a video signal up to 4k@60Hz 4:4:4 to eight
synchronous outputs, while also providing built-in signal equalization and EDID control.
Features
• HDMI 2.0b, HDCP 2.2 compliant
• Supports 18Gbps bandwidth
• Supports resolution up to 4K2K60Hz with 24bit RGB/YCBCR 4:4:4
• Supports Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X
• Supports HDR function
• Supports COPY/AUTO EDID control
• Compact design for an easy and flexible installation
Package Contents
• 1×8 HDMI 18Gbps Splitter (x1)
• 12V/1A DC Locking Power Adapter (x1)
• User Manual (x1)
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 3
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
Technical
Video Bandwidth 594MHz/18Gbps
Input Ports 1×HDMI Type A[19-pin female]
1×SERVICE (Micro USB, Updateport)
Output Ports 8×HDMI Type A [19-pin female]
Video Resolution 480i ~1080p50/60Hz, 4Kx2K@24/30Hz, 4k2k@60Hz
ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV (contact discharge)
Mechanical
Housing Metal Enclosure
Color Black
Dimensions 243mm (W) × 102mm (D) × 16mm (H)
Weight 572g
Power Supply Input: AC100 - 240V 50/60Hz
Output: DC 12V/1A (US/EU standards, CE/FCC/UL certified)
Power Consumption 6.15W
Operation Temperature 14 - 122°F / 10- 50°C
Storage temperature -4 - 140°F / -20 - 60°C
Relative Humidity 20 - 90% RH (no condensation)
Technical Specications
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 4
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
Operation Controls and Functions
1. Power LED: This blue LED illuminates when the device is connected to the power supply.
2. IN LED: This blue LED will illuminate when HDMI IN port connects an active source device.
3. OUT LED: These blue LEDs will illuminate when HDMI OUT ports connects an active display device.
4. SERVICE: Firmware update use only.
5. EDID COPY: When in ‘COPY’ mode, the unit will read the EDID setting of the HDMI OUT 1 display device
to source device, the source device will send again matching the OUT 1 display device signal to all HDMI
outputs. If no HDMI OUT 1 capable EDID is detected then the unit will read the EDID setting of the HDMI OUT
2 display device to source device...etc. The priority order is OUT 1 to OUT 8.
EDID AUTO: When in ‘AUTO’ mode, the unit will compare the EDID setting of the HDMI OUT 1~8 port displays
device then send the best EDID signal to source device, the source device will send again matching the
display device signal to all outputs.
6. HDMI OUT 1~8: Connect each of the HDMI outputs to an HDMI display for simultaneous HDMI distribution,
or cascade the output to another transmitter to extend the operating distance.
7. HDMI IN: Connect the input port to the HDMI output of your source device such as a DVD player or set-top
box with an HDMI cable.
8. DC 12V: Plug the 12V DC power supply into the unit and connected the adapter to an AC outlet.
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 5
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
Application Example
1723 W. 4th Street Tempe Arizona 85281
USER MANUAL
Page 6
To reduce the risk of electric shock, do not expose this product to rain or moisture.
Do not modify the wall plug. Doing so will void the warranty and safety features.
If the wall plug does not fit into your local power socket, hire an electrician to replace your
obsolete socket.
This equipment should be installed near the socket outlet and the device should be easily
accessible in the case it requires disconnection.
Safety Information
!
!
!
!
Warranty
Parts and labor warranty time is three year and from the date of original shipment. This warranty shall be
void if a serial number has been removed from the product.
Upon determination of a legitimate defect covered by this warranty and at COVID’s sole discretion, user
should bear the transport cost during the warranty.
If product is out of warranty then repair charge is required. Out of warranty repairs will only be made after
cost has been approved by Customers and proper financial arrangements are made. Customer must cover
round trip shipment expenses.
1X8 HDMI 2.0 (18Gbps) Splitter - DH18-200
Table of contents
Other Covid Cables And Connectors manuals
