COZY W506 User manual

Manufacturers of Heating Equipment Since 1888
LIMITED WARRANTY ON COMBUSTION CHAMBER
Cozy Gravity Wall Furnaces mount on
any inside or outside wall (single wall
model only) with 16" center stud space
and provide both circulated and radiated
heat–a preferred combination! Available
in either single wall or dual wall models,
they provide economyand flexibility of
operation and allow individual temperature
control in “hard-to-heat” areas. Cozy is a
perfect answer for either new construction
or remodeling heating applications.
Single or Dual Wall Models Available
COZY VALUE FEATURES
Mounts in
the wall ...
features
Comfort and
Economy!
Mounts in
the wall ...
features
Comfort and
Economy!
WARM AIR
RADIANT HEAT
RETURN AIR
WALL
WARM AIR
RADIANT HEAT
RETURN AIR
WALL
■Neutral Bone Baked Enamel Finish - resists
fading and cleans easily with a damp cloth.
■Resettable Blocked Flue Safety Device -
automatically shuts the unit off in the event of
flue blockage or incorrect vent installation.
■“Unibody” Grill Construction - of heavy
gauge steel eliminates heat warpage.
■Self Energizing Controls-provide their own
power, eliminating heat loss even during
a power failure.
■430 Stainless Steel, Ported Burner -
provides quiet ignition and extinction and
excellent flame characteristics for Natural
and L.P. gas.
■Low BTU Pilot - is durably constructed of
stainless steel and provides maximum
efficiency during standby.
■Continuous Seam Welded Combustion
Chamber-constructed of heavy gauge steel,
maximizes heat transfer and is warranted for
ten (10) years.
■Optional Thermostatically Controlled Fan -
is available for single and dual (uses two) wall
furnaces to enhance air circulation and
eliminate air stratification.
■Wall Thermostat or Built-in Bulb Stat -
control options available.
6 MODELS TO CHOOSE FROM . . . 25,000 TO 50,000 BTU
www.cozyheaters.com

Single Wall Furnace models
may be equipped with a
Rear Register Kit and Grille
(40542) allowing warm air
to circulate into the adjoin-
ing room. Adjustable vent
controls air flow.
ROUGH IN
Easy installation method reduces installation time to
minutes . . . only one man needed. New positive fastening
tabs hold grille in place . . . makes installation a snap!
Resettable Blocked Flue
Safety Device automatically
shuts the unit off in the
event of flue blockage or
incorrect vent installation. Continuous Seam-Welded
Combustion Chamber
constructed of heavy gauge
aluminized steel, maximizes
heat transfer. Warranted for
ten (10) years.
Free Standing Kit (FSK)
allows single wall furnaces
to be surface mounted.
Eliminates cutting holes in
wall — ideal for masonry
wall installation. For use
with ceilings up to 8'6" tall;
adds 4-3/4" to unit depth.
(vent pipe not included).
Weight: 16 lbs.
Fan accessory kit (WFF81)
available for installation on
top of furnace to increase
circulation. Adds only 101/2”
to height of casing. Fits
flush against wall — not
recessed. Operates at
50 CFM on 115V.
Optional Night Setback
Thermostat (XL 110 / XL411)
provides economic as well
as convenient operation.
W251 Bulb Nat. 25,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W255 M. Volt Nat. 25,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W252 Bulb L.P. 25,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W256 M. Volt L.P. 25,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W351 Bulb Nat. 35,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W355 M. Volt Nat. 35,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W352 Bulb L.P. 35,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W356 M. Volt L.P. 35,000 4"1/2"161/2"W ✕68" H ✕61/2"D90 lbs. 40542 5 lbs. WFF81 10 lbs.
W501 Bulb Nat. 50,000 4"1/2"161/2"W ✕68" H ✕61/2"D134lbs. N/A N/A WFF81 10 lbs.
W505 M. Volt Nat. 50,000 4"1/2"161/2"W ✕68" H ✕61/2"D134 lbs. N/A N/A WFF81 10 lbs.
W502 Bulb L.P. 50,000 4"1/2"161/2"W ✕68" H ✕61/2"D134 lbs. N/A N/A WFF81 10 lbs.
W506 M. Volt L.P. 50,000 4"1/2"161/2"W ✕68" H ✕61/2"D134 lbs. N/A N/A WFF81 10 lbs.
Model Type Type BTU/Hr. Vent Gas Finished Shipping
Number Control Gas Input Size Inlet Dimensions Weight Model Weight Model Weight
Rear Register Kit Fan Kit
SINGLE
WALL
One or two fan kits may be used on dual-wall furnace.
DUAL
WALL
SPECIFICATIONS
14
1
/ 4
" MIN .
14
1
/ 2
" MAX. 65
3
/ 4
"
45
3
/ 4
"
12
5
/ 8
"
8
1
/ 4
"
PLASTER
PLATE
REAR
REGISTER
FRAME
OPENING
FOR REAR
REGISTER
MODEL
OPENING
7/8
" FROM
EACH STUD
NAIL TO
STUDS
PLASTER
STUD
PLASTER
4
"
4 "
ROUGH-IN DIMENSIONS REAR REGISTER OUTLET LOCATION
Form No. GWF 15M 10/05
Engineered for years of efficient, trouble free service
Featuring 20 gauge aluminized combustion chambers, warranted for 10
years.