CPRO NBT5-22-R User manual
G Ver. 1.2 / 2021.03
User's Manual_Install Part
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
Fixed Bullet Camera
2M HD IP
Contents
INTRODUCTION
Product & Accessories
Part Name
03
07
INSTALLATION
08
09 Cabling
11
SPECIFICATION
12
06
2
POWER
1. Use only standardized adapters wrien in the manual.
Incorrect cower source can cre,
electric shock, or failure.
2. If there is smoke or a strange smell from the power
source, disconnect the power immediately and contact
the serice center orpurchasingoce. If you conto
use it as it is, it can cre and electric shock.
3. connect the power plug from the outlet before
cto the power terminal block.
INSTALLATION
1. Install it according to the temperature and humidity enronment
suitable for the product speccatherwise, it can cause
re and electric shock.
2. Thunder and lightning can cause problems with the camera.
When installing, be careful to minimize damage caused by
lightningsuch as grounding.
3. ce materials (driers, coins, metal
sks, etc.) and water-containers on the camera. It
causes injuries caused bre, electric shock, and falling.
4. If you want to moe the installed product, turn o
power and moe it or reinstrwise, it can cause
re and electric shock.
5. tinstall itin places where there is alotof moisture,
dust, soot, etc. It care and electric shock
.
6. Aoid places where direct sunlight comes in or where heat
comes out, such as heagappliances. It causere and electric
shock.
CLEANING
1. ray water directly on each part of the product
when cleaning. It cre and electric shock.
POWER
1. Use the power line aergitrmly to the power connec
terminal. Incomplete conneccan causere.
2. extend the adapter output cable. If you need to
install the power cable extension, please contact the
sernter.
3. Use insulated power for PoE connected external power.
INSTALLATION
1. It is recommended not to touch the lens when installing
the product as the factory ships with a focus adjustment
completed during the manufacturing comple
2. Aoid installing cameras facing bright lights like sunlight.
Causes damage to the image sensor.
3. ke sure it safe and securely when installing camera on
the wall or ceilling. This can cause injury by the fall.
4. ccameras to one adapter. Excess
capacity causes abnormal heare.
5. Wear prote gloes when installing/uninstalling the
camera. This causes burns caused by high temperature
on the surface of the product.
6. rop or shock the product. Please stay away from
places wherraeere or magnet types are
present.
7. Install it in a well-enated place. This can cre and
failure.
CLEANING
1. Wipe the contaminated surfry
cloth or wery cloth to preent water from
owing, then wipe the contaminated area.
Safety Instruction
Theseinstrucare intended to ensure that the user can use the product correctly to aoid danger orproperty loss.
If the product is notfuncgproperly ordamaged, contact the serice center orpurchasingoce.
Warnings
Serious injury or death may be caused
if any of these warnings are neglected.
Cautions
Injury or equipment damage may be caused
if any of these cautions are eglected.
3
Installarec
1. The baery (baery pack or equipped baery) must not be exposed to excessie heat such as sunlighre, etc.
2. camera at your discre
3. If you forcefully install the product with excessie forcan damage the camera.
4. tpunch orshake the camera and be careful not to damage the camera with careless storage or malfuncn.
5. Be careful not to install the camera in a rainy or humid place, and do not leae it in a wet place.
6. Installing or using the product in water can cause serious product failure.
7. stall the product if there is chemical or apor in the place where the product is installed, or if it can be generated.
8. Be careful not to get chemicals on the surface of the product when installing the product. Chemical solents such as cleaning
agents and adhesie components can cause fatal damage to the surface of the product.
9. stall it near the kitchen or cooking table as edible oil such as soybean oil can also cause product damage and
deformacan cause product damage.
10. Be careful not to get foreign substrcard terminal. If there is any foreign subst
cloth.
11. ata will not be saed at the end of the lifrcard. In this case, purchase a nercard.
12. sture may occur in the glass of the camera when the new product box is opened (or when the pr
The generated moisture is remoed by a Gore ent aached to the camera within hours of the power c
13. For products enclosed with a desiccant or card-type absorbent, please install it according to the manual.
14.
or sold with the apparatus.
15.
4
Disposal of Old Appliances
1. The symbol marked in the product, will follow and coered by the Eurre 2002/95/EC.
2. All electornic disposal of waste is dierenct by the goernment or locally, so so it need to check.
3. The correct disposal of your old appliance will help preent potengae consequences for
the enronment and human health.
4. For more detailed informayour old appliance, please contact your city o
waste disposal serre you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital dersuant to part 15 of the F
These limits are designed to proreasonable protgainst harmful interference when the equipment is operated in a commercial enronment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the insay cause
harmful interference to radio communicarant in a residenrea is likely to cause harmful interference in which case the user
will be required to correct the interferenece at his own expense.
5
Product & Accessories
Introduc
Please check if all the camera and accessories are included in the package.
Cables
Test Video Cable Template SheetTorx Wrench
Waterproof cap & Gasket
Camera
6
Part Name
Introduction -
Waterproof cap
Bracket
Pan/Tilt Stoper Screw
Control Board
Con Cap
Sunshield
Lens
7
Installation
Installation -
Zoom In
TELE
Reset to the Factory Default
to the factory default.
Warning
data. If needed, please, make a note for further
1
2
3
4
Using the Template sheet, make the cabling hole on the
wall/ceiling.
the camera.
Test Video utput
Before installing your camera, you have to read the following cau�ons.
8
Cabling
I
Power
Two Op�ons
Us
A non-PoE switch will require an adaptor for power transmission.
Ethernet cableEthernet cable
2. Using a Non-PoE Switch
If a PoE-enabled switch is not used, use a power adaptor
for power transmission and non-PoE switch for data
transmission.
without a PoE-enabled Switch.
1. Using a PoE-Enabled Switch
The Camera is PoE-compliant, allowing transmission of
power, record, or control t
below to connect the camera to a PoE-enabled switch using
an Ethernet cable.
9
Cabling
Installa
N.C
Acan
Acan
N.In 1
C
In 1
C
In 1
C
In 1
C
6Alarm In
5
3Audio In
1Power
2Network
4Audio
Audio Input
like microphone.
Audio Output
Connect the ‘A cable of the camera to dice like
speaker.
Please, check the oltage and current capacity of rated power
carefully.
Power Power
10.3W
PoE
IEEE 802.3af Class3
Alarm Output
It connects to the alarm lights, siren orlamps and the sensor
types are normal open and normal close.
Cableof the alarm outputdee should connect t1
a1of the cableslot.
Alarm Input/Sensor
Cableof the sensor/alarm inputde should connect to
ellowtellowlineof the Alam cable.
Alarm Output
Alarm Input
5
6
1
2
3
4
5 6
ot
10
Inseroemory Card
I
1Inser�ng an SD Memory Card
insert the memory card while upside down by force.
The memory card is an external data storage device
that has been developed to offer an en�rely new way
to record and share video, audio, and text data using
digital devices.
Recommended SD Card Specifica�on (Not Included)
2Removing an SD Memory Card
Gently press down on the exposed end of the memory card
as shown in the diagram to eject the memory card from
the slot.
shoot out uncontrollably from the slot when released.
memory card prior to record to will cause damage to
the data stored in the card.
11
Specifications -
92.4 96.7
122.6 102
247.2
Ø 78
Ø 4.2
12
This manual suits for next models
1
Table of contents
Other CPRO Security Camera manuals
